M6DWVS MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: M6DWVS M6DWVS SPECIFICATIONS ES-7823 Rev.10 Page 1/4 http://www.m-system.co.jp/ Euro Terminal Ultra-Slim Signal Conditioners M6D Series SIGNAL TRANSMITTER (two isolated outputs) Functions & Features

  • 5.9-mm wide ultra-slim design
  • Low profile allows the M6D module mounted in a 120-mm deep panel
  • Galvanically isolates process instrumentation signals
  • High-density mounting
  • Power indicator LED 5.9 (.23) (3.70) 102 (4.02) mm (inch) MODEL: M6DWVS-[1][2][3]-R[4]

ORDERING INFORMATION

  • Code number: M6DWVS-[1][2][3]-R[4] Specify a code from below for each [1] through [4]. (e.g. M6DWVS-AAA-R/K/UL/Q)
  • Special input range (For codes Z & 0)
  • Specify the specification for option code /Q (e.g. /C01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 50 Ω) B: 2 – 10 mA DC (Input resistance 100 Ω) C: 1 – 5 mA DC (Input resistance 200 Ω) D: 0 – 20 mA DC (Input resistance 50 Ω) E: 0 – 16 mA DC (Input resistance 50 Ω) F: 0 – 10 mA DC (Input resistance 100 Ω) G: 0 – 1 mA DC (Input resistance 1000 Ω) H: 10 – 50 mA DC (Input resistance 20 Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) [2] OUTPUT 1 Current A: 4 – 20 mA DC (Load resistance 280 Ω max.) D: 0 – 20 mA DC (Load resistance 280 Ω max.) Voltage 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) [3] OUTPUT 2 Same range availability as Output 1 Y: None POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS (multiple selections) Response Time (0 – 90 %) blank: Standard (≤ 0.5 sec.) /K: Fast Response (Approx. 3.5 msec.) Standards & Approvals blank: CE marking /UL: UL approval, CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating GENERAL SPECIFICATIONS Connection Input and output: Euro terminal (torque 0.3 N·m) Power input: Via the Installation Base (model: M6DBS) or Euro terminal (torque 0.3 N·m) Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (black) Isolation: Input to output 1 to output 2 to power Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) Power LED: Green light turns on when the power is supplied.

MODEL: M6DWVS M6DWVS SPECIFICATIONS ES-7823 Rev.10 Page 2/4 http://www.m-system.co.jp/ INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated Specify input resistance value among followings for code Z. 20Ω, 50Ω, 100Ω, 200Ω, 249Ω, 1000Ω (0.125 W ≥ [Input current]2 × R) ■ DC Voltage: -30 – +30 V DC Minimum span: 100 mV Offset: Max. 1.5 times span Input resistance: 1 MΩ min. (10 kΩ min. with no power supplied) INSTALLATION Power consumption: Approx. 0.6 W Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Installation Base (model: M6DBS) or DIN rail Weight: 60 g (2.1 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output 1 to output 2 to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1)

MODEL: M6DWVS M6DWVS SPECIFICATIONS ES-7823 Rev.10 Page 3/4 http://www.m-system.co.jp/ EXTERNAL VIEW (With the cover open) Zero Adj. Power LED Span Adj. Output 1 Zero Adj. Span Adj. Output 2 EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 94 (3.70) 5.9 (.23) DIN RAIL HOOK 102 (4.02) [0.5 (.02)] 8–M3 EURO TERMINAL DIN RAIL 35mm wide 5 6 7 8 1 2 3 4

  • When mounting, no extra space is needed between units. WIRE INSERTION ANGLE: approx. 7° SCREWDRIVER INSERTION ANGLE : approx. 40°

MODEL: M6DWVS M6DWVS SPECIFICATIONS ES-7823 Rev.10 Page 4/4 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM SZ Low Drift Amplifier+ INPUT * Input shunt resistor incorporated for current input. Remark: The section enclosed by broken line is only with 2nd output option. POWER POWER LED OUTPUT 1 Isolation Output Driver SZ Output Driver OUTPUT 2 POWER CONNECTOR Specifications are subject to change without notice.