M6DSN MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
MODEL: M6DSN M6DSN SPECIFICATIONS ES-7825 Rev.10 Page 1/3 http://www.m-system.co.jp/ Euro Terminal Ultra-Slim Signal Conditioners M6D Series INPUT LOOP POWERED ISOLATOR Functions & Features
- 5.9-mm wide ultra-slim design
- Low profile allows the M6D module mounted in a 120-mm deep panel
- Loop-powered design eliminates output loop power supply
- Two isolators housed in one enclosure
- High-density mounting 5.9 (.23) (3.70) 102 (4.02) mm (inch) MODEL: M6DSN–[1]DD[2]
ORDERING INFORMATION
- Code number: M6DSN-[1]DD[2] Specify a code from below for each [1] and [2]. (e.g. M6DSN-2DD/UL/Q)
- Specify the specification for option code /Q (e.g. /C01) [1] NO. OF CHANNELS 1: 1 channel 2: 2 channels INPUT Current D: 0 – 20 mA DC (4 – 20 mA DC) OUTPUT Current D: 0 – 20 mA DC (4 – 20 mA DC) [2] OPTIONS (multiple selections) Standards & Approvals blank: CE marking /UL: UL approval, CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating GENERAL SPECIFICATIONS Connection: Euro terminal (torque 0.3 N·m) Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (black) Isolation: Input to output; between channels Span adjustments: ±0.5 % (front) INPUT & OUTPUT Equivalent input impedance: 250 Ω plus load resistance with 20 mA input Operational range: 0.05 – 40 mA DC (Accuracy is assured within 0.05 – 22 mA) Minimum operating current: 0.05 mA Load resistance: 0 – 600 Ω Input Current (mA) 4 12 20 10.0 4.0 6.0V (approx.) Load resistance 50Ω6.0 12.0 14.0 16.0 18.0 approx. 5.4 8.0 10.2V (approx.) Load resistance 250Ω approx. 5.2 approx. 5.0 17.4V (approx.) Load resistance 600Ω Voltage Across Input Terminals (V) INSTALLATION Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Installation Base (model: M6DBS) or DIN rail Weight: 60 g (2.1 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: Approx. 20 msec. (0 – 90 %) Load effect: (factory-calibrated with 250 Ω load) Insulation resistance: ≥ 100 MΩ with 500 V DC
MODEL: M6DSN M6DSN SPECIFICATIONS ES-7825 Rev.10 Page 2/3 http://www.m-system.co.jp/ Dielectric strength:
1500 V AC @1 minute (input to output)
2000 V AC @1 minute (between channels)
2000 V AC @1 minute (input or output to ground)
STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1) EXTERNAL VIEW (With the cover open) Channel 2 Span Adj. Channel 1 Span Adj.
MODEL: M6DSN M6DSN SPECIFICATIONS ES-7825 Rev.10 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 94 (3.70) 5.9 (.23) DIN RAIL HOOK 102 (4.02) [0.5 (.02)] 8–M3 EURO TERMINAL DIN RAIL 35mm wide 5 6 7 8 1 2 3 4
- When mounting, no extra space is needed between units. WIRE INSERTION ANGLE: approx. 7° SCREWDRIVER INSERTION ANGLE : approx. 40° SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM INPUT 1 + OUTPUT Isolation Inverter S INPUT Channel 1 Channel 2 3 + OUTPUT Isolation Inverter S CONNECTOR Specifications are subject to change without notice.