M6DDY MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: M6DDY M6DDY SPECIFICATIONS ES-7824 Rev.10 Page 1/4 http://www.m-system.co.jp/ Euro Terminal Ultra-Slim Signal Conditioners M6D Series CURRENT LOOP SUPPLY Functions & Features

  • 5.9-mm wide ultra-slim design
  • Low profile allows the M6D module mounted in a 120-mm deep panel
  • Powers a two-wire transmitter and galvanically isolates its output signal
  • High-density mounting
  • Power indicator LED 5.9 (.23) (3.70) 102 (4.02) mm (inch) MODEL: M6DDY–[1]–R[2]

ORDERING INFORMATION

  • Code number: M6DDY-[1]-R[2] Specify a code from below for each [1] and [2]. (e.g. M6DDY-A-R/UL/Q)
  • Specify the specification for option code /Q (e.g. /C01) INPUT Current 4 – 20 mA DC (Input resistance 249.5 Ω) [1] OUTPUT Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) Voltage 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [2] OPTIONS (multiple selections) Standards & Approvals blank: CE marking /UL: UL approval, CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating GENERAL SPECIFICATIONS Connection Input and output: Euro terminal (torque 0.3 N·m) Power input: Via the Installation Base (model: M6DBS) or Euro terminal (torque 0.3 N·m) Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (black) Isolation: Input to output to power Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) Power LED: Green light turns on when the power is supplied. SUPPLY OUTPUT (across the terminals 3 – 4) Output voltage: 24 – 30 V DC with no load 18 V DC min. at 20 mA Current rating: ≤ 22 mA DC
  • Shortcircuit Protection Current limited: 45 mA max. Protected time duration: No limit INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated INSTALLATION Power consumption: Approx. 1 W (1.1 W for UL approval) Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Installation Base (model: M6DBS) or DIN rail Weight: 60 g (2.1 oz)

MODEL: M6DDY M6DDY SPECIFICATIONS ES-7824 Rev.10 Page 2/4 http://www.m-system.co.jp/ PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) Response time: ≤ 100 msec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1) EXTERNAL VIEW (With the cover open) Zero Adj. Power LED Span Adj.

MODEL: M6DDY M6DDY SPECIFICATIONS ES-7824 Rev.10 Page 3/4 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 94 (3.70) 5.9 (.23) DIN RAIL HOOK 102 (4.02) [0.5 (.02)] 8–M3 EURO TERMINAL DIN RAIL 35mm wide 5 6 7 8 1 2 3 4

  • When mounting, no extra space is needed between units. WIRE INSERTION ANGLE: approx. 7° SCREWDRIVER INSERTION ANGLE : approx. 40° SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation SZ Low Drift Amplifier Output Driver+ OUTPUT POWER POWER LED

24 V DC

249.5Ω 2-WIRE TRANSMITTER VMONITOR ■ When Used as DC Supply ■ When Used as Isolator 249.5 Ω 2-WIRE TRANSMITTER 249.5 Ω INPUT POWER CONNECTOR

MODEL: M6DDY M6DDY SPECIFICATIONS ES-7824 Rev.10 Page 4/4 http://www.m-system.co.jp/ Specifications are subject to change without notice.