M6DBS MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

MODEL: M6DBS M6DBS SPECIFICATIONS ES-7845 Rev.11 Page 1/5 http://www.m-system.co.jp/ Euro Terminal Ultra-Slim Signal Conditioners M6D Series INSTALLATION BASE Functions & Features

  • Backplane to collectively supply power to the M6D modules in combination with the Power Supply Module (model: M6DPSx or M6-PSM) MODEL: M6DBS–[1][2]

ORDERING INFORMATION

  • Code number: M6DBS-[1][2] Specify a code from below for each [1] and [2]. (e.g. M6DBS-08/UL/Q)
  • Specify the specification for option code /Q (e.g. /C01) [1] NUMBER OF SLOTS 08: 8 slots 08P: 8 slots (for extension) 08A: 8 slots + power supply slot (for model M6-PSM) (UL not available) [2] OPTIONS (multiple selections) Standards & Approvals blank: CE marking /UL: UL approval, CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) Only solder side of the main PWB is coated. /C01: Silicone coating /C02: Polyurethane coating

RELATED PRODUCTS

  • M6D series signal conditioners (Not able to supply to AC power signal conditioners (M2 code))
  • Power supply module (model: M6DPS1)
  • Power supply module (model: M6DPS2)
  • Power supply module (model: M6-PSM)
  • Blank filler module (model: M6DDM) GENERAL SPECIFICATIONS Capacity: Up to 48 modules (including power supply module) with Extension Bases (The usable number of signal conditioners depends on the capacity of the power supply module. Refer to the M6-PSM specification sheets.) Isolation: Power to ground INSTALLATION Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Surface or DIN rail Weight: M6DBS-08, -08P: 50 g (1.8 oz) without signal conditioners M6DBS-08A: 80 g (2.8 oz) without signal conditioners PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1)

MODEL: M6DBS M6DBS SPECIFICATIONS ES-7845 Rev.11 Page 2/5 http://www.m-system.co.jp/ EXTERNAL VIEW Install signal conditioners from the slot at either end. Power Supply Modules (M6DPS1 or M6DPS2) could be mounted at any slots, however, installing them at either end is generally recommended. Mount the power supply module (M6-PSM) on the power module slot of M6DBS-08A. Power Supply Module Signal Conditioner 2 8 ■ M6DBS-08A 1 2 • • • •8 ■ M6DBS-08, M6DBS-08P Signal Conditioner or Power Supply Module

  • • • •

MODEL: M6DBS M6DBS SPECIFICATIONS ES-7845 Rev.11 Page 3/5 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) 72 (2.83) 37 (1.46) 3 (.12) ■ M6DBS-08A ■ M6DBS-08, M6DBS-08P 27 (1.06) 16 (.63) 49 (1.93) 37 (1.46) 11.5 (.45) 14 (.55) 24.4 (.96) 27 (1.06) 22.5 (.89) 116 (4.57) DIN RAIL 35mm wide DIN RAIL 35mm wide [5 (.20)] (.55) 49 (1.93) [3 (.12)] 3–4.5 (.18) dia. MTG HOLE 2 (.08) deep 70 (2.76) 116 (4.57) 22.5 (.89) [5 (.20)] (.55) 49 (1.93) 3–4.5 (.18) dia. MTG HOLE 2 (.08) deep 24.4 (.96) 14 (.55) 70 (2.76) [3 (.12)]

MODEL: M6DBS M6DBS SPECIFICATIONS ES-7845 Rev.11 Page 4/5 http://www.m-system.co.jp/ MOUNTING REQUIREMENTS unit: mm (inch) ■ MOUNTING DIRECTION The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise, may shorten the product’s life expectation or deteriorate its performance. Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.) M6DBS Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.) (.39) (.39) (.55) 40 (1.6) ■ SURFACE MOUNTING 3-M4

  • M6DBS-08A 24.4 (.96) 24.4 (.96) 11.8 (.46) n-M4 *1
  • M6DBS-08A + M6DBS-08P
  • M6DBS-08
  • M6DBS-08 + M6DBS-08P 3-M4 n-M4 *1 11.8 (.46) 70 (2.76) 70 (2.76) 70 (2.76) 70 (2.76) 37 (1.46)37 (1.46) 14 (.55) 14 (.55) 14 (.55) 14 (.55) *1. n = (Number of bases) x 3

MODEL: M6DBS M6DBS SPECIFICATIONS ES-7845 Rev.11 Page 5/5 http://www.m-system.co.jp/ Specifications are subject to change without notice.