M692SDM

M692SDM IDT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

M692SDM Datasheet Rev 2.0 Revised 27Jan2012 Integrated Device Technology, Inc. ● Netcom East ● www.idt.com ● tel (774) 348-1600 M692SDM SIGE SINGLE FREQUENCY VCSO Performance Datasheet GENERAL DESCRIPTION The M692SDM is a single frequency/single output SAW-based VCSO for low-jitter clock generation. The M692SDM incorporates an analog X2 frequency multiplier to provide an output frequency that is twice that of the fundamental VCSO frequency.

FEATURES

◆ Integrated SAW device ◆ Low phase jitter: 250fs rms typical for the M692SDM (20kHz to 20MHz) ◆ Output frequency: 1747 MHz Typ. (Specify center frequency at time of order) ◆ Single-ended RF Output ◆ Single +5V power supply ◆ 13 x 20mm SMT (surface mount) package ◆ +10oC to +85oC operating temperature ◆ Pb-free / Compliant to EC RoHS Directive (RoHS 5/6) PIN ASSIGNMENT (13 x 20mm SMT) Figure 1: Pin Assignment BLOCK DIAGRAM Figure 2: Block Diagram Sample of Available Output Frequencies VCSO Center Frequencies1 (MHz) Note 1: Specify VCSO center frequency at time of order. Other frequencies available upon request. Output Frequency Code

1747.623000 R01

1747.030837 R02

1748.366885 R03

1748.793733 R04

Table 1: Sample of Available Output Frequencies SAW Delay Line M692SDM SiGe Single Frequency VCSO

M692SDM Datasheet Rev 2.0 2 of 5 Revised 27Jan2012 Integrated Device Technology, Inc. ● Netcom East ● www.idt.com ● tel (774) 348-1600 M692SDM SIGE SINGLE FREQUENCY VCSO Performance Datasheet PIN DESCRIPTIONS Number Name I/O Configuration Description 1V I N Input Frequency control input. 2, 3, 5 GND Ground Power supply ground connection. 4 RF OUTPUT Output No internal terminator Clock output. Single-ended. 6V C C Power Power supply connection, connect to +5.0 V. Table 2: Pin Descriptions ABSOLUTE MAXIMUM RATINGS1 Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings are stress specifications only. Functional operation of product at these conditions or any conditions beyond those listed in Recommended Conditions of Operation, DC Characteristics, or AC Characteristics is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability. Symbol Parameter Rating Unit VI Inputs -0.5 to VCC +0.5 V VO Outputs -0.5 to VCC +0.5 V VCC Power Supply Voltage 6.0 V TS Storage Temperature -55 to +125 oC Table 3: Absolute Maximum Ratings RECOMMENDED CONDITIONS OF OPERATION Symbol Parameter Min Typ Max Unit VCC Positive Supply Voltage 4.875 5.0 5.125 V TCASE Operating Temperature +10 +85 oC Table 4: Recommended Conditions of Operation

M692SDM Datasheet Rev 2.0 3 of 5 Revised 27Jan2012 Integrated Device Technology, Inc. ● Netcom East ● www.idt.com ● tel (774) 348-1600 M692SDM SIGE SINGLE FREQUENCY VCSO Performance Datasheet ELECTRICAL SPECIFICATIONS DC Characteristics for M692SDM Unless stated otherwise, VCC = 5.0 Volts + 2.5%, TCASE = 10 to 85 oC, VCSO Frequency = 1747.623000, Output terminated with 50Ω. Symbol Parameter Pin Min Typ Max Unit Power Supply VCC Positive Supply Voltage VCC 4.875 5.0 5.125 V ICC Power Supply Current 145 165 mA Control Voltage VIN Input Control Voltage Range VIN 0 3.3 V VIN Input Impedence 20 kΩ Table 5: DC Characteristics for M692SDM AC Characteristics for M692SDM Unless stated otherwise, VCC = 5.0 Volts + 2.5%, TCASE = 10 to 85 oC, VCSO Frequency = 1747.623000, Outputs terminated with 50Ω. Symbol Parameter Min Typ Max Unit Notes Control Voltage VIN Modulation Bandwidth VIN 500 kHz Output RF OUTPUT Output Center Frequency Range1 Note 1: Spurious free start-up and ±50 ppm APR guaranteed to -5o C. 1500 2100 MHz POUTPUT Output Power 7.5 10.0 12.0 dBm 50Ω load; AC Coupled TRANGE Tuning Range 1000 ppm fSTAB Frequency Stability 300 ppm p-p 10ºC to 85ºC Power Supply Pushing -32 32 ppm VCC = 5.0V±2.5V LIN Tuning Linearity -8 8 % Deviation from best Linear fit KVCO VCO Gain @1747.623000MHz 340 ppm/V Harmonic Spurious -30 dBc Sub-harmonic Spurious -30 dBc Non-harmonic Spurious -60 dBc VSWR Load VSWR, all phases 3.5:1 Φ n SSB (single sideband) Phase Noise, offset from carrier 1747.623000MHz 10kHz Offset -95 dBc/Hz 100kHz Offset -116 dBc/Hz 1MHz Offset -134 dBc/Hz 10MHz Offset -140 dBc/Hz 20MHz Offset -143 dBc/Hz Table 6: AC Characteristics for M692SDM

M692SDM Datasheet Rev 2.0 4 of 5 Revised 27Jan2012 Integrated Device Technology, Inc. ● Netcom East ● www.idt.com ● tel (774) 348-1600 M692SDM SIGE SINGLE FREQUENCY VCSO Performance Datasheet DEVICE PACKAGE - 13 x 20mm SMT (Surface Mount) Package Mechanical Dimensions: Figure 3: Device Package - 13 x 20mm SMT (Surface Mount Package) M692 PIN OUT PIN 1 VIN PIN 2 GND PIN 3 GND PIN 4 RF OUTPUT PIN 5 GND PIN 6 VCC 13.0 [0.512] 2.4 [0.094] 15.2 [0.600] 2.5 [0.100] 1.6 [0.062] T O P VIEW 6 5 4 1 2 3 6x 1.9 [0.073] 6x 1.2 [0.049]

6.35 MAX

0.250 MAX

Pad Finish: Gold over Nickel MSL 1

M692SDM Datasheet Rev 2.0 5 of 5 Revised 27Jan2012 Integrated Device Technology, Inc. ● Netcom East ● www.idt.com ● tel (774) 348-1600 M692SDM SIGE SINGLE FREQUENCY VCSO Performance Datasheet

ORDERING INFORMATION

Figure 4: Part Numbering Scheme Example Order Numbers M692SDM Standard Output Frequencies & Order Codes Consult IDT for the availability of other frequencies For Output Frequencies (MHz) Frequency Order Part Number M692SDM-xxx

1747.623000 M692SDM-R01

1747.030837 M692SDM-R02

Table 7: Example Order Numbers M692SD Part Number: M680-01 - See Table 8 at right for frequency order codes. Device Number Consult IDT for other frequencies and order codes. M692SDM Output Frequency Order Code xxx Output Frequency Code Output Frequency MHz R01 1747.623000 R02 1747.030837 R03 1748.366885 R04 1748.793733 Table 8: M692SDM Standard Output Frequencies & Order