M675S02

M675S02 IDT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

M675S02 Datasheet Rev 1.0 Revised 07Feb2012 Integrated Device Technology, Inc. ● N e t c o m T i m i n g ● www.idt.com ● tel (774) 348-1600 M675S02 SIGE SINGLE FREQUENCY VCSO Preliminary Datasheet GENERAL DESCRIPTION The M675S02 is a single frequency/single output SAW-based VCSO for low-jitter clock generation. The SAW (surface acoustic wave) delay line serves as a high-Q resontaor and the low noise SiGe VCSO IC provides a low noise floor and low 1/f phase noise. The combination of the SAW delay line and the custom IC result in very low phase noise and jitter performance. The M675S02 is available in frequencies from 500 to

1000 MHz with a guaranteed minimum pull-range

of ±120 ppm. Industry-standard Kvco (VCO Gain) provides full replacement compatibility for most designs. The M675S02 is well suited for phase-locked loop applications, clock and data recovery circuits and other timing applications in telecom and optical fiber networking systems.

FEATURES

◆ Integrated SAW device ◆ Low phase jitter 0.2ps rms typical for the M675S02 (50kHz to 80MHz) - Design Target ◆ Output frequencies from 500 to 1000 MHz (Specify center frequencies at time of order) ◆ Industry-standard Kvco for full compatibility ◆ Differential 3.3V LVPECL output ◆ Single 3.3V power supply ◆ Small 5 x 7.5mm SMT (surface mount) package ◆ Pb-free / Compliant to EC RoHS Directive (RoHS 5/6) PIN ASSIGNMENT (5 x 7.5mm SMT) Figure 1: Pin Assignment BLOCK DIAGRAM Figure 2: Block Diagram Sample of Available Output Frequencies VCSO Center Frequencies1 (MHz) Note 1: Specify VCSO center frequency at time of order

Applications

622.0800 SONET/SDH

625.0000 Gigabit Ethernet

644.5313 GbE FEC

669.3266 SONET/SDH FEC

Table 1: Sample of Available Output Frequencies M675S02 (Top View) 6VIN CLK_EN VCC nFOUT GND FOUT CLK_EN VIN FOUT nFOUT SAW Delay Line Phase Shifter M675S02 M675S02 SiGe Single Frequency VCSO

M675S02 Datasheet Rev 1.0 2 of 5 Revised 07Feb2012 Integrated Device Technology, Inc. ● N e t c o m T i m i n g ● www.idt.com ● tel (774) 348-1600 M675S02 SIGE SINGLE FREQUENCY VCSO Preliminary Datasheet PIN DESCRIPTIONS Number Name I/O Configuration Description 1V I N Input Frequency control input. 2C L K _ E N Input Internal pull-up resistor 1 Clock Enable Logic 1 enables normal operation. Logic 0 stops the output clock; nFOUT is held high, FOUT is held low. 3G N D Ground Power supply ground connection. FOUT nFOUT Output No internal terminator Clock output pair. Differential LVPECL. 6V C C Power Power supply connection, connect to + 3.3V. Table 2: Pin Descriptions Note 1: See “Clock Enable Pull-up” in Table 5 (DC Characteristics for M675S02 on pg. 3). ABSOLUTE MAXIMUM RATINGS1 Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings are stress specifications only. Functional operation of product at these conditions or any conditions beyond those listed in Recommended Conditions of Operation, DC Characteristics, or AC Characteristics is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability. Symbol Parameter Rating Unit VI Inputs -0.5 to VCC +0.5 V VO Outputs -0.5 to VCC +0.5 V VCC Power Supply Voltage 4.0 V TS Storage Temperature -55 to +125 oC Table 3: Absolute Maximum Ratings RECOMMENDED CONDITIONS OF OPERATION Symbol Parameter Min Typ Max Unit VCC Positive Supply Voltage 2.97 3.3 3.63 V TA Ambient Operating Temperature -40 +85 oC Table 4: Recommended Conditions of Operation

M675S02 Datasheet Rev 1.0 3 of 5 Revised 07Feb2012 Integrated Device Technology, Inc. ● N e t c o m T i m i n g ● www.idt.com ● tel (774) 348-1600 M675S02 SIGE SINGLE FREQUENCY VCSO Preliminary Datasheet ELECTRICAL SPECIFICATIONS DC Characteristics for M675S02 Unless stated otherwise, VCC = 3.3 Volts + 10%, TCASE = -40 to 85 oC, VCSO Frequency = 622.08, Outputs terminated with 50Ω to VCC-2.0V ground Symbol Parameter Pin Min Typ Max Unit Power Supply VCC Positive Supply Voltage VCC 2.97 3.3 3.63 V ICC Power Supply Current 100 120 mA Control Voltage VIN Input Control Voltage Range VIN 0 3.3 V VIN Input Impedence 20 kΩ Clock Enable Pull-up VIH Input High Voltage F_SEL 2 Vcc + 0.3 V VIL Input Low Voltage -0.3 0.8 V IIH Input High Current 70 µA IIL Input Low Current -150 µA Rpullup Internal Pull-up Resistor 51 kΩ Differential Outputs VOH Output High Voltage FOUT, nFOUT Vcc - 0.98 Vcc - 0.75 V VOL Output Low Voltage Vcc - 1.95 Vcc - 1.63 V VP-P Peak to Peak Output Voltage1 Note 1: Single-ended measurement. See Figure 3, Output Rise and Fall Time, on pg. 4. 0.45 0.625 0.85 VP-P IOUT Output Current 20 mA Table 5: DC Characteristics for M675S02 AC Characteristics for M675S02 Unless stated otherwise, VCC = 3.3 Volts + 10%, TCASE = -40 to 85 oC, VCSO Frequency = 622.08, Outputs terminated with 50Ω to VCC-2.0V ground Symbol Parameter Min Typ Max Unit Notes Control Voltage VIN Modulation Bandwidth VIN 600 kHz Output FOUT Output Center Frequency Range 500 1000 MHz Note 1: Also fully meets ±50 ppm minimum pull- range specification that is commonly required. ±120 ppm fSTAB Frequency Stability ±120 ppm p-p At any givin VIN LIN Tuning Linearity ±10 % VIN = 0.3 to 3.0V KVCO VCO Gain @622.08MHz 330 ppm/V VIN = 0.3 to 3.0V Non-harmonic Spurious -60 dBc Φ n SSB (single sideband) Phase Noise, offset from carrier 622.08MHz 100Hz Offset -55 dBc/Hz 1kHz Offset -85 dBc/Hz 10kHz Offset -110 dBc/Hz 100kHz Offset -130 dBc/Hz 1MHz Offset -143 dBc/Hz 10MHz Offset -147 dBc/Hz J(t) Jitter (rms) 622.08MHz 12kHz to 20MHz 0.155 ps rms 50kHz to 80MHz 0.170 ps rms odc Output Duty Cycle 2 Note 2: See Parameter Measurement Information on pg. 4. 45 55 % tR Output Rise Time 2 for FOUT, nFOUT 200 300 ps 20% to 80% tF Output Fall Time 2 for FOUT, nFOUT 200 300 ps 20% to 80% Table 6: AC Characteristics for M675S02

M675S02 Datasheet Rev 1.0 5 of 5 Revised 07Feb2012 Integrated Device Technology, Inc. ● N e t c o m T i m i n g ● www.idt.com ● tel (774) 348-1600 M675S02 SIGE SINGLE FREQUENCY VCSO Preliminary Datasheet

ORDERING INFORMATION

Figure 6: Part Numbering Scheme Example Order Numbers M675S02 Standard Output Frequencies & Order Codes Consult IDT for the availability of other frequencies For Output Frequencies (MHz) Frequency Order Part Number M675S02-xx

622.0800 M675S02-AA

625.0000 M675S02-AB

Table 7: Example Order Numbers M675S0 Part Number: M680-01 - xx See Table 8 at right for frequency order codes. Device Number Consult IDT for other frequencies and order codes. M675S02 Variant 02 = Output Frequencies 500 - 1000 MHz Output Frequency Order Code 500.0000 CA 693.4830 AL 622.0800 AA 657.4219 AM 625.0000 AB 614.4000 AO 627.3296 AC 475.0000 AP 644.5313 AD 707.3527 AQ 666.5143 AE 624.7048 AR 669.1281 AF 777.6000 AS 669.3120 AG 699.5175 AT 669.3266 AH 696.6149 AU 670.8386 AI 698.8123 AV 672.1627 AJ 873.5154 AY 690.5692 AK 873.8115 AZ Table 8: M675S02 Standard Output Frequencies & Order Codes