K650 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Copyright © 2025 Sensata Technologies, Inc. sensata.com | K650 PLATFORM CONTROL SYSTEM FOR SLAB SCISSOR LIFT Main Features M650P650 P650

  • 144 x 32 dot-matrix screen to display fault & vehicle status
  • Silicone buttons with additional overlay for double protection and excellent resistance
  • Auxiliary CAN and Analog inputs for anti-collision sensors or system M650
  • 2 in 1 Integrated Motor Controller and Electronic Controller solution
  • 3 independent MC modules for highest safety
  • Flexible to configure as 2 AC Traction MC with 1 AC or DC Pump MC
  • 1 independent ECU module for I/O control The K650 is a new generation of platform control system designed to meet the electrification needs of Mobile Elevating Work Platforms. The system includes an integrated motor controller optimized for fully electric and hybrid slab scissor lifts. The P650 (Platform Control Unit) and M650 (Motor & Electronic Control Unit) constitute the complete K650 kit. This latest module design enables improved unit safety while relying on proven Sensata technology for high reliability and robustness - even in harsh environments. SPECIFICATIONS Supply Voltage 16-32 V, rated voltage is 24 V Motor Control Units Max Current S2-2 min S2-60 min Traction 2 x 130 Arms 2 x 65 Arms Pump* 300 Arms 150 Arms Control Motor Types BLDC, PMSM, SynRM, ACIM, BDC, SERIES, SepEx Electrical Control Unit Tilt Sensor Built-In sensor with angle detection range ±10° at 25°C EMC Designed to comply with EN 61326-3-1, EN12895 and EN IEC 61000-6 Fusa Designed to comply with ISO 13849 according to EN280 Electrical Parameter P650 M650 Operating Temperature -40 °C to 50 °C Protection Level IP65 (after installed) IP65 Life Joystick > 5 million cycles NA Pushbuttons > 1 million cycles Mechanical Custom Modifications
  • Custom overlay graphics
  • Configurable ports
  • Custom software service * If connected to a DC motor, the maximum current is 300 VDC

Copyright © 2025 Sensata Technologies, Inc. sensata.com Page 2 P650 Platform Control Unit M650 Control Unit Pin Single Type Characteristic Pin Single Type Characteristic Pin Single Type Characteristic Pin 1 Analog Input 0-5VDC/4-20m Pin 13 Analog Input 0-5VDC/4-20m Pin 25 Analog Input 0-5VDC/4-20m Pin 2 GND Pin 14 Analog Input 0-5VDC Pin 26 Digital output 12VDC@2.5A Pin 3 comm. CANH Pin 15 Analog Input 0-5VDC Pin 27 Digital output 12VDC@2.5A Pin 4 comm. CANL Pin 16 Digital Input 0VDC/12VDC, HS Pin 28 Digital output 12VDC@2.5A Pin 5 Digital Input 0VDC/12VDC, HS Pin 17 Digital Input 0VDC/12VDC, HS Pin 29 Digital output 12VDC@2.5A Pin 6 Digital Input 0VDC/12VDC, HS Pin 18 Digital Input 0VDC/12VDC, HS Pin 30 Digital output 12VDC@2.5A Pin 7 Digital Input 0VDC/12VDC, HS Pin 19 Digital Input 0VDC/12VDC, HS Pin 31 Digital output 12VDC@2.5A Pin 8 Digital Input 0VDC/12VDC, HS Pin 20 Digital Input 0VDC/12VDC, HS Pin 32 PWM output 12VDC@2.5A Pin 9 Digital Input 0VDC/12VDC, HS Pin 21 Digital Input 0VDC/12VDC, HS Pin 33 PWM output 12VDC@2.5A Pin 10 Digital Input 0VDC/12VDC, HS Pin 22 Digital Input 0VDC/12VDC, HS Pin 34 KSI Power Input Pin 11 Digital Input 0VDC/12VDC, HS Pin 23 KSI Power Input Pin 35 KSI Power Input Pin 12 Digital Input 0VDC/12VDC, HS Pin24 Analog Input 0-5VDC/4-20m Pin 36 Digital Input 0VDC@1A Pin Single Type Characteristic Pin Single Type Characteristic Pin Single Type Characteristic Pin 1 KSI Power Input / Pin 13 Analog Input 0-5V Pin 25 Digital output 12VDC@2A, LS Pin 2 Digital Output 24V@300mA Pin 14 Analog Input 0-5V Pin 26 Digital output 12VDC@2A, LS Pin 3 Analog Input 0~5V Pin 15 comm. CANL Pin 27 Digital output 12VDC@2A, LS Pin 4 Digital Input 0VDC/12VDC, LS Pin 16 comm. CANH Pin 28 Digital output 12VDC@2A, LS Pin 5 GND / Pin 17 EXC1 Resolver1 Ref. 2 Pin 29 EXC2 Resolver2 Ref. 1 Pin 6 Encoder3 power GND Pin 18 EXC2 Resolver2 Ref. 1 Pin 30 Encoder3 power VCC Pin 7 EXC2 Resolver2 Ref. 2 Pin 19 SIN2+ / Pin 31 SIN2- / Pin 8 COS2+ / Pin 20 COS2- / Pin 32 M2 Temp. Signal / Pin 9 SIN1+ / Pin 21 SIN1- / Pin 33 COS1+ / Pin 10 COS1- / Pin 22 M1 Temp. Signal / Pin 34 SIN3+ / Pin 11 SIN3- / Pin 23 COS3+ / Pin 35 COS3- / Pin 12 M3 Temp. Signal / Pin24 KML Contactor+ / Pin 36 Digital Input 0VDC@1A Pin 1 Ground Pin 2 CAN High Pin 3 E-Stop Out (+24V out) Pin 4 +24V in Pin 5 CAN Low Pin 6 Unused Pin 1 Power Pin 2 - Pin 3 - Pin 4 Ground Pin 1 Power 9~36 VDC Pin 2 Analog Input 0~30 VDC Pin 3 Analog Input 0~30 VDC Pin 4 Analog Input 0~30 VDC Pin 5 Ground 0 VDC Pin 6 CAN High - Pin 7 CAN Low - A1 Connector Connector: SIBAS HQ-005-M CN1 Connector Connector TE 776163-1 CN2 Connector Connector TE 776163-2 USB Connector (Optional) USB Type A, Supply 5V/Max 0.5A Power A2 Connector Connector: PLT-167-RL-R

sensata.com Copyright © 2025 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements, and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA Page 3 Rev:02/13/25 CONTACT US INDUSTRIAL SOLUTIONS DIVISION Americas +1 (800) 350 2727 sensors.deltatech@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 ost-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 DIMENSIONS All dimensions are in inches [millimeters] 10.59 (269.0) 6.38 (162.0) 10.08 (256.0) 5.43 (138.0) 4- 0.276 ( 7.0) P1P12 A13 A24A12 A23 A35 P13 P24 P23 P35 Connector: 776163-1 Connector: 776163-2 2.74 (69.5) 0.472 (12.0) NOTE: 1.Storage temperature: -40~85°; 2.Operating temperature:- 40~50°; 3.There are no scratches and defects on the surface of the product; 4.There are no burrs on the product; 2 31 C B D E A F ECO NUMBER APPROVED A B C D E F 6 7 85 41 2 3 6 7 8 FIRST ISSUE DESCRIPTIONREVZONE A DATE . 2024.03.28 . INTERPRET DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. THIRD ANGLE PROJECTION 1:2 REV

1 OF 1

NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES. TOLERANCES M650-00-01 M650 2in1 with motor and ECU Controller YIWEI WANG 23.JUN.05 DO NOT SCALE DRAWING

18 CHUANGXIN ROAD

ANGULAR ±0.5°LINEAR .X ±0.3 .XX ±0.13 .XXX ±0.05 10.59 (269.0) 6.38 (162.0) 10.08 (256.0) 5.43 (138.0) 4- 0.276 ( 7.0) P1P12 A13 A24A12 A23 A35 P13 P24 P23 P35 Connector: 776163-1 Connector: 776163-2 2.74 (69.5) 0.472 (12.0) NOTE: 1.Storage temperature: -40~85°; 2.Operating temperature:- 40~50°; 3.There are no scratches and defects on the surface of the product; 4.There are no burrs on the product; 2 31 C B D E A F ECO NUMBER APPROVED A B C D E F 6 7 85 41 2 3 6 7 8 FIRST ISSUE DESCRIPTIONREVZONE A DATE . 2024.03.28 . INTERPRET DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. THIRD ANGLE PROJECTION 1:2 REV NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES. TOLERANCES M650-00-01 M650 2in1 with motor and ECU Controller YIWEI WANG 23.JUN.05 DO NOT SCALE DRAWING ANGULAR ±0.5°LINEAR .X ±0.3 .XX ±0.13 .XXX ±0.05 ORDERING INFORMATION Example: P650-00-01 Part Number Product Description P650-00-01 P650 Platform Control Unit M650-00-01 M650 Motor & Electronic Control Unit