M5VF MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: M5VF M5VF SPECIFICATIONS ES-2464 Rev.14 Page 1/3 http://www.m-system.co.jp/ Super-mini Terminal Block Signal Conditioners M5-UNIT SIGNAL TRANSMITTER (high speed response) Functions & Features

  • Converts a DC input into an isolated DC signal
  • Ultra-high speed response 150 μsec.
  • High-density mounting
  • Power LED 25 (.98) (3.82) 41 (1.61) mm (inch) MODEL: M5VF-[1][2]-[3][4]

ORDERING INFORMATION

  • Code number: M5VF-[1][2]-[3][4] Specify a code from below for each [1] through [4]. (e.g. M5VF-4W4W-R/Q)
  • Special input and output ranges (For codes Z & 0)
  • Specify the specification for option code /Q (e.g. /C01/V01/S01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 249 Ω) B: 2 – 10 mA DC (Input resistance 499 Ω) C: 1 – 5 mA DC (Input resistance 1000 Ω) D: 0 – 20 mA DC (Input resistance 49.9 Ω) E: 0 – 16 mA DC (Input resistance 61.9 Ω) F: 0 – 10 mA DC (Input resistance 100 Ω) G: 0 – 1 mA DC (Input resistance 1000 Ω) H: 10 – 50 mA DC (Input resistance 20 Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) Z: Specify current (See OUTPUT SPECIFICATIONS) (Not selectable with the power input code M) Voltage 4: 0 – 10 V DC (Load resistance 1000 Ω min.) 5: 0 – 5 V DC (Load resistance 500 Ω min.) 6: 1 – 5 V DC (Load resistance 500 Ω min.) 4W: -10 – +10 V DC (Load resistance 8000 Ω min.) (For the input suffix codes 4W and 5W only) 5W: -5 – +5 V DC (Load resistance 4000 Ω min.) (For the input suffix codes 4W and 5W only) 0: Specify voltage (See OUTPUT SPECIFICATIONS) (Not selectable with the power input code M) [3] POWER INPUT AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) (CE not available) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating ADJUSTMENT /V01: Multi-turn fine adjustment TERMINAL SCREW MATERIAL /S01: Stainless steel

MODEL: M5VF M5VF SPECIFICATIONS ES-2464 Rev.14 Page 2/3 http://www.m-system.co.jp/ GENERAL SPECIFICATIONS Construction: Terminal block Connection: M3.5 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange output: Approx. -10 to +110 % at 1 – 5 V Zero adjustment: -2 to +2 % (front) (±1 % with the input suffix codes 4W and 5W selected) Span adjustment: 98 to 102 % (front) (99 to 101 % with the input suffix codes 4W and 5W selected.) Power LED: Green LED turns on when the power is supplied. INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated Specify input resistance value among followings for code Z. 20Ω, 49.9Ω, 61.9Ω, 100Ω, 249Ω, 499Ω, 1000Ω (0.125 W ≥ [Input current]2 × R) ■ DC Voltage: -30 – +30 V DC Minimum span: 1 V Offset: Max. 1.5 times span Input resistance: 1 MΩ min. (10 kΩ min. at power loss) OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max.; 9 V max. for the full-scale output < 3 mA ■ DC Voltage: 0 – 10 V DC Minimum span: 1 V Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max.; at ≥ 1 V INSTALLATION Power Consumption

  • AC: Approx. 2 VA at 100 V Approx. 2 VA at 200 V Approx. 3 VA at 264 V
  • DC: Approx. 2 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 80 g (2.8 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) ±0.02 %/°C (±0.01 %/°F) with AC power Response time: ≤ 150 μsec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength (input to output to power to ground) DC powered: 2000 V AC @1 minute AC powered: 1500 V AC @1 minute STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581

MODEL: M5VF M5VF SPECIFICATIONS ES-2464 Rev.14 Page 3/3 http://www.m-system.co.jp/ FRONT VIEW Span Adj. Power LED Zero Adj. 1 2 3 4 5 6 7 8 EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 94 (3.70) 3 (.12)

  • When mounting, no extra space is needed between units. DIN RAIL 35mm wide 8–M3.5 SCREW7.3 (.29)1 2 3 4 5 6 7 8 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM IsolationSZ Low Drift Amplifier Output Driver3 *Input shunt resistor incorporated for current input. OUTPUT SIGNAL SOURCE The M5VF, by its fast-response feature, is not designed to eliminate noise present in the input signal. Use a shielded twisted-pair cable for preventing noise entering through the input wiring. POWER LED U(+) V(–) POWER Specifications are subject to change without notice.