M52757FP RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Frequency band width: R.G.B 250 MHz
  • Input level: R.G.B 0.7 V P-P (Typ.)
  • Video signal-detector Responsive frequency: to 50 MHz Input level: 0.7 V P-P (Typ.) Detected level: 150 mV (Typ.) (Measure bottom to DET. level)
  • Only the G channel is proved with buffer video output.
  • It is possible to save the consumption current by stopping current supply to Pin 2, 4, 6, 20, 24, 30, 33, 35 because SOG-DET can be operated with only VCC5 (Pin 15) as power save mode.
  • Include Sync Separation, Video signal detector, and Sync-on G detector. Application Display monitor Recommended Operating Condition Supply voltage range: 4.75 to 5.5 V Rated voltage: 5.0 V

REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 2 of 6 Block Diagram 1815 16 17141312111098654321 7 1922 21 2023242526272829313233343536 30 + + + + + + INPUT1 (R) VCC1 (R) INPUT1 (G) VCC1 (G) INPUT1 (B) VCC1 (B) INPUT2 (R) INPUT2 (G) INPUT2 (B) SyncDET1 Sync DET2 S-DET out VCC5 VideoDET -Hold V-DET out SW GND: INPUT1 SW OPEN: INPUT2 RG B G Sync sepa OR S-DET Power save VCC (5 V) VCC2 (R) OUTPUT (R) OUTPUT (G) VCC2 (G) VCC2 (B) OUTPUT (B) G Buffer out (for Sync on G) Sync SEP in Sync SEP out VCC3 V-DET in3 V-DET in2 VCC4 V-DET in1 Pin Arrangement INPUT1 (R) VCC1 (R) INPUT1 (G) VCC1 (G) INPUT1 (B) VCC1 (B) INPUT2 (R) GND1 INPUT2 (G) GND5 INPUT2 (B) SyncDET1 SyncDET2 S-DETout VCC5 VideoDET-Hold V-DETout SWITCH VCC2 (R) OUTPUT (R) GND2 (R) V CC2 (G) OUTPUT (G) GND2 (G) V CC2 (B) OUTPUT (B) GND2 (B) G Buffer out Sync SEP in Sync SEP out V CC3 V-DET in3 GND4 V-DET in2 V CC4 V-DET in1 M52757FP (Top view) Outline: PRSP0036GA-B (36P2R-D)

REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 3 of 6 Absolute Maximum Ratings (Ta = 25°C) Item Symbol Ratings Unit Supply voltage VCC 7.0 V Power dissipation Pd 1068 mW Operating temperature Topr −20 to +85 °C Storage temperature Tstg −40 to +150 °C Recommended operating supply voltage Vopr 5.0 V Recommended operating supply voltage range Vopr' 4.75 to 5.5 V Electrostatic discharge Sarge ±200 V Power Dissipation Pd (mW) Ambient Temperature Ta (°C) Thermal Derating (Maximum Rating) 1250 250 500 750 1000 1068 −25 0 25 50 75 85 100 125 150

REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 4 of 6

Electrical Characteristics

(VCC = 5 V, Ta = 25°C) Limits Item Symbol Min Typ Max Unit Test Point (s) Input SW18 Circuit current 1 ICC1 45 65 85 mA A  OPN Circuit current 2 ICC5 3 5 7 mA 15  OPN <RGB SW> Output DC voltage 1 Vdc1 1.1 1.5 1.9 V 29, 32, 35  OPN Output DC voltage 2 Vdc2 1.1 1.5 1.9 V 29, 32, 35  GND Output DC voltage 3 Vdc3 0.5 0.9 1.3 V 27  OPN Output DC voltage 4 Vdc4 0.5 0.9 1.3 V 27  GND Maximum allowable input 1 VImax1 1.4 1.6  V P-P 1, 3, 5 1, 3, 5 GND Maximum allowable input 2 VImax2 1.4 1.6  V P-P 7, 9, 11 7, 9, 11 GND Voltage gain 1 Gv1 −0.1 0.5 1.1 dB 29, 32, 35 1, 3, 5 GND Relative voltage gain 1 ∆Gv1 −0.6 0 0.6 dB Relative to measured values above Voltage gain 2 Gv2 −0.1 0.5 1.1 dB 29, 32, 35 7, 9, 11 OPN Relative voltage gain 2 ∆Gv2 −0.6 0 0.6 dB Relative to measured values above Voltage gain 3 Gv3 −0.6 0 0.6 dB 27 3 GND Voltage gain 4 Gv4 −0.6 0 0.6 dB 27 9 OPN Freq. characteristic 1 (100 MHz) Fc1 −1.0 0 1.0 dB 29, 32, 35 1, 3, 5 GND Relative Freq. characteristic 1 ∆Fc1 −1.0 0 1.0 dB Relative to measured values above Freq. characteristic 2 (100 MHz) Fc2 −1.0 0 1.0 dB 29, 32, 35 7, 9, 11 OPN Relative Freq. characteristic 2 ∆Fc2 −1.0 0 1.0 dB Relative to measured values above Freq. characteristic 1 (250 MHz) Fc3 −3.0 −1.5 1.0 dB 29, 32, 35 1, 3, 5 GND Freq. characteristic 2 (250 MHz) Fc4 −3.0 −1.5 1.0 dB 29, 32, 35 7, 9, 11 OPN Crosstalk between 2 inputs 1 (10 MHz) CTI1  −60 −50 dB 29, 32, 35 1, 3, 5 GD to OP Crosstalk between 2 inputs 2 (10 MHz) CTI2  −60 −50 dB 29, 32, 35 7, 9, 11 OP to GD Crosstalk between 2 inputs 3 (100 MHz) CTI3  −40 −35 dB 29, 32, 35 1, 3, 5 GD to OP Crosstalk between 2 inputs 4 (100 MHz) CTI4  −40 −35 dB 29, 32, 35 7, 9, 11 OP to GD Crosstalk between channel 1 (10 MHz) CTC1  −50 −40 dB 29, 32, 35 1, 3, 5 GND Crosstalk between channel 2 (10 MHz) CTC2  −50 −40 dB 29, 32, 35 7, 9, 11 OPN Crosstalk between channel 3 (100 MHz) CTC3  −30 −25 dB 29, 32, 35 1, 3, 5 GND Crosstalk between channel 4 (100 MHz) CTC4  −30 −25 dB 29, 32, 35 7, 9, 11 OPN Tr1  1.6 2.5 ns 29, 32, 35 1, 3, 5 GND Pulse characteristic 1 Tf1  1.6 2.5 ns 29, 32, 35 1, 3, 5 GND Tr2  1.6 2.5 ns 29, 32, 35 7, 9, 11 OPN Pulse characteristic 2 Tf2  1.6 2.5 ns 29, 32, 35 7, 9, 11 OPN <SYNC SEP> Sync input min. level SYrv 0.2   V P-P 25 26  Sync-sep output Hi level SYVH 4.5 4.9  V 25 26  Sync-sep output Low level SYVL  0.2 0.4 V 25 26  Sync-sep output delay time 1 TdSf  60  ns 25 26  Sync-sep output delay time 2 TdSb  60  ns 25 26 

REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 5 of 6 Electrical Characteristics (cont.) Limits Item Symbol Min Typ Max Unit Test Point (s) Input SW18 <SYNC DET> Min. detectable Sync amplitude SDETrv 0.2   V P-P 14 3, 9  Max. detectable Sync width SDETrt  4.0  µs 14 3, 9  Sync-DET output high level SDVH 4.5 4.9  V 14 3, 9  Sync-DET output low level SDVL  0.2 0.4 V 14 3, 9  Max. allowable input noise level SDETnv   0.05 V P-P 14 3, 9  <VIDEO DET> Allowable input DC range VDinV 2. 0 2.4 2.8 V 19, 21, 23 19, 21, 23  Allowable input amplitude range VDin  0.7 1.0 V P-P 19, 21, 23 19, 21, 23  Min. detectable input level VDETrv 0.15   V P-P 17 19, 21, 23  Max. allowable input noise level VDETnv   0.1 V P-P 17 19, 21, 23  Max. input pulse width VDETrt  10.0  ns 17 19, 21, 23  Video-DET output Hi level SDVH 4.2 4.8  V 17 19, 21, 23  Video-DET output Low level SDVL  0.7 1.0 V 17 19, 21, 23 

REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 6 of 6 Package Dimensions bp HE y 0.10 e 0.8 c 0° 8° L 0.3 0.5 0.7 0 0.1 0.2 A 2.35 11.63 11.93 12.23 A2 2.05 E 8.2 8.4 8.6 D 14.8 15.0 15.2 Reference Symbol Dimension in Millimeters Min Nom Max 0.3 0.35 0.45 0.18 0.2 0.25 P-SSOP36-8.4x15-0.80 0.5g MASS[Typ.] 36P2R-DPRSP0036GA-B RENESAS CodeJEITA Package Code Previous Code 0.65 0.95 DO NOT INCLUDE MOLD FLASH. NOTE) DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. y Index mark 1 18 1936 F E HE D e bp A c Detail F L

Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Renesas Technology Singapore Pte. Ltd.

1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632

Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 RENESAS SALES OFFICES © 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2