M4N25 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

1Motorola Optoelectronics Device Data /C0054/C0045/C0080/C0105/C0110 /C0068/C0073/C0080 /C0079/C0112/C0116/C0111/C0105/C0115/C0111/C0108/C0097/C0116/C0111/C0114/C0115 /C0084/C0114/C0097/C0110/C0115/C0105/C0115/C0116/C0111/C0114 /C0079/C0117/C0116/C0112/C0117/C0116 The M4N25 device consists of a gallium arsenide infrared emitting diode optically coupled to a silicon NPN phototransistor detector.

  • Most Economical Optoisolator Choice for Medium Speed, Switching Applications
  • Meets or Exceeds All JEDEC Registered Specifications

Applications

  • General Purpose Switching Circuits
  • Interfacing and coupling systems of different potentials and impedances
  • I/O Interfacing
  • Solid State Relays MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating Symbol Value Unit INPUT LED Reverse Voltage VR 3 Volts Forward Current — Continuous IF 60 mA LED Power Dissipation @ TA = 25°C with Negligible Power in Output Detector Derate above 25°C PD 100 1.41 mW mW/ °C OUTPUT TRANSISTOR Collector–Emitter Voltage VCEO 30 Volts Emitter–Collector Voltage VECO 7 Volts Collector–Base Voltage VCBO 70 Volts Collector Current — Continuous IC 50 mA Detector Power Dissipation @ TA = 25°C with Negligible Power in Input LED Derate above 25°C PD 150 1.76 mW mW/ °C TOTAL DEVICE Isolation Surge Voltage(1) (Peak ac Voltage, 60 Hz, 1 sec Duration) VISO 7500 Vac(pk) Total Device Power Dissipation @ TA = 25°C Derate above 25°C PD 250 2.94 mW mW/ °C Ambient Operating Temperature Range(2) TA –55 to +100 °C Storage Temperature Range(2) Tstg –55 to +150 °C Soldering Temperature (10 sec, 1/16″ from case) TL 260 °C 1. Isolation surge voltage is an internal device dielectric breakdown rating. 1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common. 2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions. Order this document by M4N25/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0077/C0052/C0078/C0050/C0053 SCHEMATIC PIN 1. LED ANODE 2. LED CATHODE 3. N.C. 4. EMITTER 5. COLLECTOR 6. BASE STANDARD THRU HOLE STYLE 1 PLASTIC  Motorola, Inc. 1997

/C0077/C0052/C0078/C0050/C0053

2 Motorola Optoelectronics Device Data

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)(1) Characteristic Symbol Min Typ(1) Max Unit INPUT LED Forward Voltage (IF = 10 mA) T A = 25°C TA = –55°C TA = 100°C VF — 1.15 1.3 1.05 1.5 Volts Reverse Leakage Current (VR = 3 V) IR — — 100 µA Capacitance (V = 0 V, f = 1 MHz) C J — 18 — pF OUTPUT TRANSISTOR Collector–Emitter Dark Current (VCE = 10 V, TA = 25°C) ICEO — 1 50 nA (VCE = 10 V, TA = 100°C) ICEO — 1 — µA Collector–Base Dark Current (VCB = 10 V) ICBO — 0.2 — nA Collector–Emitter Breakdown Voltage (IC = 1 mA) V(BR)CEO 30 45 — Volts Collector–Base Breakdown Voltage (IC = 100 µA) V(BR)CBO 70 100 — Volts Emitter–Collector Breakdown Voltage (IE = 100 µA) V(BR)ECO 7 7.8 — Volts Collector–Emitter Capacitance (f = 1 MHz, VCE = 0) C CE — 7 — pF Collector–Base Capacitance (f = 1 MHz, VCB = 0) C CB — 19 — pF Emitter–Base Capacitance (f = 1 MHz, VEB = 0) C EB — 9 — pF COUPLED Output Collector Current (IF = 10 mA, VCE = 10 V) IC (CTR)(2) 2 (20) 7 (70) — mA (%) Collector–Emitter Saturation Voltage (IC = 2 mA, IF = 50 mA) VCE(sat) — 0.15 0.5 Volts Turn–On Time (IF = 10 mA, VCC = 10 V, RL = 100 Ω )(3) ton — 2.8 — µs Turn–Off Time (IF = 10 mA, VCC = 10 V, RL = 100 Ω )(3) toff — 4.5 — µs Rise Time (IF = 10 mA, VCC = 10 V, RL = 100 Ω )(3) tr — 2 — µs Fall Time (IF = 10 mA, VCC = 10 V, RL = 100 Ω )(3) tf — 2 — µs Isolation Voltage (f = 60 Hz, t = 1 sec)(4) VISO 7500 — — Vac(pk) Isolation Resistance (V = 500 V)(4) R ISO 1011 — — Ω Isolation Capacitance (V = 0 V, f = 1 MHz)(4) C ISO — 0.2 — pF 1. Always design to the specified minimum/maximum electrical limits (where applicable). 2. Current Transfer Ratio (CTR) = IC /IF x 100%. 3. For test circuit setup and waveforms, refer to Figure 14. 4. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.

4 Motorola Optoelectronics Device Data

Figure 6. Collector–Emitter Current Figure 7. Collector–Emitter Leakage Figure 8. Normalized CTRcb vs. LED Figure 9. Normalized Photocurrent vs. Figure 10. Normalized Non–Saturated HFE vs. Base

/C0077/C0052/C0078/C0050/C0053

6 Motorola Optoelectronics Device Data

0.248 (6.30) 0.256 (6.50) 0.335 (8.50) 0.343 (8.70) PIN ONE ID. 0.039 (1.00) min. 0.031 (0.80) 0.100 (2.54) typ. 0.018 (0.45) 4 typ. 0.035 (0.90) 0.022 (0.55) /C0095 0.130 (3.30) 0.138 (3.50) 0.031 (0.80) min. 18 typ./C0095 0.300 (7.62) typ. 0.300 (7.62) 0.347 (8.82) 0.114 (2.90) 0.130 (3.30) ANODE CATHODE NC BASE COLLECTOR EMITTER 0.010 (0.25) typ. Package Dimensions in Inches (mm)

/C0077/C0052/C0078/C0050/C0053 7Motorola Optoelectronics Device Data Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.

/C0077/C0052/C0078/C0050/C0053

8 Motorola Optoelectronics Device Data

Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315 – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET : http://www.mot.com/SPS/ M4N25/D◊