M4500 PETERMANN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FEATURES

  • HIGH RELIABILITY FOR LOW COST - TEMPERATURE STABILITY OF +-1 PPM AVAILABLE - EXCELLENT PHASE NOISE PERFORMANCE - LOW POWER CONSUMPTION - CHEAPEST AVAILABLE LEADED TCXO IN HERMETICALLY SEALED DIP PACKAGE SERIES PACKAGE HCMOS / TTL CLIPPED SINE WAVE VS. TEMPERATURE VS. SUPPLY VOLTAGE VS. LOAD VS. AGING OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE STANDARD OPTION RISE AND FALL TIME FOR HCMOS RISE AND FALL TIME FOR TTL "0" LEVEL "1" LEVEL "0" LEVEL "1" LEVEL CLIPPED SINE WAVE HCMOS TTL CLIPPED SINE WAVE STANDARD OPTION EXTERNAL CONTROL VOLTAGE

10 Hz offset from carrier

100 Hz offset from carrier

10 kHz offset from carrier 100 kHz offset from carrier PIN 1 PIN 7 PIN 8 PIN 14 NOT CONNECTED OR CONTROL VOLTAGE -150 dBc/Hz 0.4 VDC max. 15 pF 10 kΩ / 10 pF CASE GROUND OUTPUT SUPPLY VOLTAGE - EXTENDED TEMPERATURE RANGE TO -40/+85°C AVAILABLE 10 ns max. (10% VDD TO 90% VDD) HCMOS / TTL CLIPPED SINE WAVE SYMMETRY FREQUENCY RANGE CURRENT

2.5 VDC +-2 VDC

-145 dBc/Hz -80 dBc/Hz -105 dBc/Hz -130 dBc/Hz +-5 ppm min. by external control voltage 10% VDD max. 90% VDD min. +5.0 VDC +-5% 45/55% for HCMOS / TTL 10 ns max. (0.4 TO 2.4 VOLT) +-3 ppm min. per internal trimmer -40/+85°C

2 TTL

40 mA max. for HCMOS / TTL 3 mA max. for CLIPPED SINE WAVE 40/60% for HCMOS / TTL M4500 DIP 14 PACKAGE 2.0 ~ 51.84 MHz 10.0 ~ 51.84 MHz +-1 ~ +-5 ppm +-0.5 ppm max. / 5VDC +-5% +-0.2 ppm max. / 10 pF ~ 20 pF +-1 ppm max. per year PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION OUTPUT FREQUENCY STABILITY HCMOS PIN CONNECTION SIGNALS FREQUENCY ADJUSTMENT PHASE NOISE (typical) INPUT TTL 1.0 V peak to peak min. 2.4 VDC min. LOAD PETERMANN TECHNIK Time & Frequency Components

Time & Frequency Components PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de PART NUMBERING GUIDE EXAMPLE M4500-S-J-10-S-V-27.000MHz SERIES M4500 S = CLIPPED SINE WAVE T = TTL OUTPUT SIGNAL H = HCMOS J = 0/+50°C N = -10/+60°C X = 0/+70°C M = -20/+70°C K = -30/+75°C TEMPERATURE RANGE W = -40/+85°C 10 = +-1.0 ppm 15 = +-1.5 ppm 20 = +-2.0 ppm 25 = +-2.5 ppm 50 = +-5.0 ppm STABILITY VS. TEMPERATURE X = OTHER VALUE - PLEASE INDICATE YOUR REQUIRED VALUE BLANK = 40/60% SYMMETRY FOR HCMOS / TTL S = 45/55% V = 2.5 +-2.0 VDC for +-5 ppm min. VCTCXO OPTION X = OTHER VALUE - PLEASE INDICATE YOUR REQUIRED VALUE FREQUENCY FREQUENCY IN MHz OUTLINE DRAWING M4500 0.9max 8.5m ax #1 #7 #14 #810.7+0.15 5.35+0.15 7.62+0.3 15.24+0.15 ConnectionPIN #14 N.C. or Control Voltage Case Ground Output V DD Unit:mm 20.7max 13.08m ax #1MARK

Time & Frequency Components PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de TEST CIRCUIT FOR HCMOS TEST POINT+ - mA M VMPOWER SUPPLY - 0,1µF OSCILLATOR OUT GND #1 #7 #8#14 C =15pFL NOTE: CL includes probe and fixture capacitance VCC CONTROL VOLTAGE TEST CIRCUIT FOR TTL TEST POINT+ - mA M VMPOWER SUPPLY - 0,1µF OSCILLATOR OUT GND #1 #7 #8#14 1N4148 or Equiv CONTROL VOLTAGE NOTE: CL includes probe and fixture capacitance VDD R= 3 9 0L C =15pFL TEST CIRCUIT FOR CLIPPED SINE WAVE TEST POINT+ - mA M VMPOWER SUPPLY - 0,1µF OSCILLATOR OUT GND #1 #7 #8#14 C =10pFL N.C. or Control Voltage NOTE: CL includes probe and fixture capacitance VDD 10k (HCMOS LOAD) tr tf Th T VOL DUTY=Th/T VOH 90%VDD 50%VDD 10%VDD (TTL LOAD) tr tf Th T VOL DUTY=Th/T VOH 2.4V 1.4V 0.4V 0.0VDC V 1V min P-P CLIPPED SINE WAVE