M4034

M4034 UTC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

UNISONIC TECHNOLOGIES CO., LTD M4034 LINEAR INTEGRATED CIRCUIT www.unisonic.com.tw 1 of 6 Copyright © 2005 Unisonic Technologies Co., Ltd QW-R124-005,A 3-INPUT VIDEO SWITCH „ DESCRIPTION The UTC M4034 is 3-input video switch selecting one of three input video or audio signals. Its operating supply voltage range is 5 ~ 12V and bandwidth is 10MHz. Crosstalk is 70dB (at 4.43MHz). „ FEATURES * Operating Voltage: +4.75V ~ +13V * 3 Input-1 Output * Muting Function available * Wide Operating Supply voltage Range: 4.75V ~ 13V * Cross-talk 70dB (at 4.43MHz) * Muting Function available * Bipolar Technology DIP-8 SOP-8 SSOP-8 SIP-8 MSOP-8 *Pb-free plating product number: M4034L „ ORDERING INFORMATION M4034L-D08-T (1)Packing Type (2)Package Type (3)Lead Plating (1) R: Tape Reel, T: Tube (2) D8: DIP-8, G08: SIP-8, S08: SOP-8, SM 1: MSOP-8, R08: SSOP-8 (3) L: Lead Free Plating , Blank: Pb/Sn Order Number Normal Lead Free Plating Package Packing M4034-D08-T M4034L-D08-T DIP-8 Tube M4034-G08-T M4034L-G 08-T SIP-8 Tube M4034-S08-R M4034L-S08- R SOP-8 Tape Reel M4034-S08-T M4034L-S08-T SOP-8 Tube M4034-SM1-R M4034L-SM1-R MSOP-8 Tape Reel M4034-SM1-T M4034L-SM1-T MSOP-8 Tube M4034-R08-R M4034L-R08-R SSOP-8 Tape Reel M4034-R08-T M4034L-R08-T SSOP-8 Tube

M4034 LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 2 of 6 www.unisonic.com.tw Q W - R 1 2 4 - 0 0 5 , A „ PIN CONFIGURATION SOP-8/DIP-8/MSOP-8/SSOP-8 SIP-8 VIN1 SW1 VIN2 SW2 VIN 3 VOUT GND 1 234567 8 VIN1 VIN2 VIN3 VOUT GN D SW 2 SW 1 „ BLOCK DIAGRAM 8 7 6 5 GND VOUT V+ VIN3 (Mute) 1 2 3 4 VIN1S W 1V IN2S W 2 BUFFER 15k 15k 15k BIAS C.C.T.

M4034 LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 3 of 6 www.unisonic.com.tw Q W - R 1 2 4 - 0 0 5 , A „ ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT Supply Voltage V + 15 V SOP-8 250 mW DIP-8 500 mW MSOP-8 300 mW SSOP-8 250 mW Power Dissipation SIP-8 PD 800 mW Junction Temperature T J +125 ℃ Operating Temperature T OPR -20 ~ +75 ℃ Storage Temperature T STG -40 ~ +125 ℃ Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. „ ELECTRICAL CHARACTERISTICS (VIN=5V, Ta=25℃) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Recommended Supply Voltage V + 4.75 13.0 V Output Offset Voltage V O(OFF) (Note 2) -30 +30 mV High V CH All inside SW : ON 2.4 V Switch Change Voltage Low V CL All inside SW : OFF 0.8 V Operating Current I CC S1=S2=S3=S4=S5=1 10.6 14.5 mA Voltage Gain G V V IN=2.5V, 100kHz, VOUT/VIN -0.5 +0.5 dB Total Harmonic Distortion THD V INI=2.5V, 1kHz 0.03 % Differential Gain DG V IN=2V, Staircase signal 0 % Differential Phase DP V IN=2V, Staircase signal 0 deg Frequency Characteristic (1) G f1 V IN=2.5V, VOUT(20Hz)/VOUT (100kHz) -1.0 +1.0 dB Frequency Characteristic (2) G f2 V IN=2.0V, VOUT(10MHz)/VOUT(100kHz) -1.0 +1.0 dB Crosstalk (1) CT1 V IN=2.0V, 4.43MHz, VOUT/VIN (Note 3) -70 dB Crosstalk (2) CT2 V IN=2.0V, 4.43MHz, VOUT/VIN (Note 4) -70 dB Input Impedance R 1 15 k Ω Output Impedance R OUT 10 Ω Note 1: If it is not shown about switch condition, it is tested on three conditions below. Note 2: S1=S2=S3=1, Output DC Voltage difference of three mode below. Note 3: S5=1, Tested on all combination of S1 to S4 excepted two below. (a) S1=S2, S4=1 (b) S2=S4=2 Note 4: Tested on all combination of S1 to S4 excepted one. (a) S5=2, S3=2

M4034 LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 4 of 6 www.unisonic.com.tw Q W - R 1 2 4 - 0 0 5 , A „ EQUIVALENT CIRCUIT PIN NO. PIN FUNCTION INSIDE EQUIVALENT CIRCUIT PIN NO. PIN FUNCTION INSIDE EQUIVALENT CIRCUIT

1 V IN1

200ΩVIN1 15kΩ200Ω

5 VIN3

(Mute) 200ΩVIN3 15kΩ200Ω

2 SW1

13kΩ 1.1mA 9kΩ 200Ω 2kΩ SW1

6 V +

3 V IN2

200ΩVIN2 15kΩ200Ω

7 V OUT

200Ω 5mA VOUT

4 SW2

13kΩ 1.1mA 9kΩ 200Ω 2kΩ SW2

8 GND

M4034 LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 5 of 6 www.unisonic.com.tw Q W - R 1 2 4 - 0 0 5 , A „ TEST CIRCUIT 8 67 5 1 32 4 GND V OUT V+ VIN3 VIN1S W 1 V IN2S W 2 10μF 0.01μF V+GND 220μF VOUT 10μF10μF10μF S1 S2 S3 121212 12 12 S4 S5 VOUT RL 1kΩ VCON „ CONNECTION DIAGRAM Terminal Name V IN1 SW1 V IN2 SW2 V IN3 V + V OUT GND DC Voltage 3 5 V+ 5 V+ 5 V+ 5 V+-0.7

M4034 LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 6 of 6 www.unisonic.com.tw Q W - R 1 2 4 - 0 0 5 , A „ TYPICAL APPLICATION CIRCUIT Oscillation Prevention on light loading conditions Recommended under circuit C VOUT 7 LPF r C 20pF r 100Ω Note: 0.1uF capacitor is required between INPUT and GND for bias type input at mute mode. C Input C 0.1μF UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expec ted to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.