M3H-50 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Ideal for High Density Packaging
  • High Isolation
  • VSWR: 1.3:1 Max.
  • Impedance: 50 Ohms Nominal
  • Maximum Power Rating or Input Power: 1 Watt Max.
  • Internal Load Dissipation: 0.05 Watts Max.
  • MIL-STD-202 Screening Available

Description

A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. Pin Configuration Pin No. Function Pin No. Function P1 Out P3 Out P2 In P4 Out Parameter Test Conditions Frequency Units Min Typ Max Frequency — 1 - 100 MHz — — — Insertion Loss Less Coupling 1 - 100 MHz dB — — 0.5 Isolation — 1 - 100 MHz dB 30 — — Amplitude Balance — 1 - 100 MHz dB — — 0.2 Phase Balance — 1 - 100 MHz ° — — 1.0 VSWR — 1 - 100 MHz Ratio — — 1.3:1 Parameter Test Conditions Frequency Units Min Typ Max Frequency — 50 - 300 MHz MHz — — — Insertion Loss Less Coupling 50 - 300 MHz dB — — 0.75 Isolation — 50 - 300 MHz dB 25 — — Amplitude Balance — 50 - 300 MHz dB — — 0.2 Phase Balance — 50 - 300 MHz ° — — 2.0 VSWR — 50 - 300 MHz Ratio — — 1.3:1 1. All specification apply with 50 ohm source and load impedance.

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Three-Way Power Dividers, 1 - 100 MHz and 50 - 300 MHz Rev. V3 M3H-50 / M3V-50 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves Isolation - Ports 1 - 3 Insertion Loss - Ports 2 - 3, 2 - 1 Part Number Package M3H-50 PIN TO-5-2 M3V-50 PIN TO-5-2