M3SDY MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
MODEL: M3SDY M3SDY SPECIFICATIONS ES-7710 Rev.4 Page 1/3 http://www.m-system.co.jp/ Super-space-saving Signal Conditioners M3S-UNIT Series CURRENT LOOP SUPPLY Functions & Features
- Powers a two-wire transmitter and galvanically isolates its output signal
- High-density mounting
- Power indicator LED 12 (.47) mm (inch) 110.5 (4.35) 106 (4.17) MODEL: M3SDY–[1]–R[2]
ORDERING INFORMATION
- Code number: M3SDY-[1]-R[2] Specify a code from below for each [1] and [2]. (e.g. M3SDY-A-R/Q)
- Specify the specification for option code /Q (e.g. /C01) INPUT Current 4 – 20 mA DC (Input resistance 249.5 Ω) [1] OUTPUT Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) Voltage 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [2] OPTIONS Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Small-sized front terminal structure Connection: Euro type connector terminal Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (gray) Isolation: Input to output to power Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) Power LED: Green light turns on when the power is supplied. SUPPLY OUTPUT (across the terminals 3 – 4) Output voltage: 24 – 28 V DC with no load 18 V DC min. at 20 mA Current rating: ≤ 22 mA DC
- Shortcircuit Protection Current limited: 45 mA max. Protected time duration: No limit INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated INSTALLATION Power consumption
- DC: Approx. 1 W Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 100 g (3.53 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 100 msec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground)
MODEL: M3SDY M3SDY SPECIFICATIONS ES-7710 Rev.4 Page 2/3 http://www.m-system.co.jp/ STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 EXTERNAL VIEW 1 2 3 4 Zero Adj. Power LED Span Adj. EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 7 8 5 6 1 2 3 4 106 (4.17) (.47) 110.5 (4.35) 62 (2.44) [5 (.20)]
- When mounting, no extra space is needed between units. DIN RAIL 35mm wide
MODEL: M3SDY M3SDY SPECIFICATIONS ES-7710 Rev.4 Page 3/3 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation SZ Low Drift Amplifier Output Driver+ OUTPUT POWER POWER LED 24V DC Supply Shortcircuit Portection 249.5Ω 2-WIRE TRANSMITTER VMONITOR When Used as DC Supply When Used as Isolator 249.5Ω 2-WIRE TRANSMITTER 2 249.5Ω INPUT Specifications are subject to change without notice.