K3G200-AD EBMPAPST | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
A A A A A A A A A A A 16A A A A 12A A A A A A A A A A A A 16A A A A Highlights: – Control Input: 0-10 VDC/PWM – Output: 10 VDC, max 1.1 mA – Tach Output – Over-temperature protected electronics/motor – Soft start, motor current limit – Locked rotor protection Material: Impeller: PA composite Housing: PP composite Mounting position: Any Condensate discharge holes: None, open rotor Direction of rotation: Clockwise, seen on rotor 0.00 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 0 100 200 300 400 500 600 q cfm pfs q cfm pfs q cfm pfs q cfm pfs in. wg Air performance measured as per: ISO 5801, Installation category A, without protection against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LPA measured at 1m distance to fan axis. The values given are valid under the measuring conditions mentioned and may vary accoring to the actual installation situation. With any deviation to the standard set-up, the specific values have to be checked and reviewed once installed or fitted. For detailed information on the measuring set-up, please contact ebm-papst. Curves n rpm Pe W I A LpAin dB(A) LwAin dB(A) 3160 69 0.63 64 72 3120 75 0.68 62 70 3100 80 0.70 61 69 3100 76 0.69 61 69 2945 59 0.96 62 70 2885 62 1.00 61 69 2850 65 1.00 59 68 2845 64 1.00 59 68 (1) Nominal data at maximum load. Nominal Data Air flow Phase Voltage Voltage range Frequency Power input (1) Speed (1) Current draw (1) Max back pressure Temperature range (1) Mass Bearing Ingress protection rating UL Chart Type Motor cfm VAC VAC Hz W rpm A in. H 20 °C lbs A B B A EC Diagonal Compact Modules Series K3G200-AD Ø 200 mm
K3G200-ADXX-XX Dimensions shown in millimeters Connection screen Conn. Designation Color Function/assignment CON10 L black Power supply for voltage range refer to rating plate CON11 N blue Neutral conductor CON12 PE green/yellow Protective earth
1 GND blue GND-Connection for control interface
2 0- 10V PWM yellow Control input0-10Vor PWM, electrically isolated 3 10V/ max 1.1mA red Voltage output 10V/1.1 mA, electrically isolated