M39012-01-0501 FAIRVIEW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

REV 1.1 Page 1 of 3 Copyright © 2020 Type N male connector with crimp/solder attachment for RG214, part number M39012/01-0501, from Fairview Microwave is in-stock and ships same day. This type N male connector operates up to a maximum frequency of 11 GHz and offers excellent VSWR of 1.25:1. Fairview’s type N male connector M39012/01-0501 datasheet specifications and outline drawing are shown in this PDF below. Our extensive offering of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like. From providing an I/O for a board design to creating a custom cable assembly configuration, Fairview Microwave has a connector solution to meet your needs. Fairview Microwave also has the expertise to build your custom cable assemblies for you and ship them same-day. Electrical Specifications Description Min Typ Max Units Frequency Range D C 11 GHz VSWR 1.25:1 DWV (AC) 2,500 Vr ms Mechanical Specifications Weight 0.07187 lbs [32.6 g] Material Specifications Description Material Plating Contact Beryllium Copper Gold Insulation PTFE . Outer Conductor Brass Silver . Body Brass Silver Compliance Certifications (see product page for current document) Plotted and Other Data Notes: M39012/01-0501 DATA SHEET M39012/01-0501 N Male (Plug) Connector For RG214 Cable, Crimp/Solder Fairview Microwave 301 Leora Ln., Suite 100 Lewisville, TX 75056 Tel: 1-800-715-4396 / (972) 649-6678 Fax: (972) 649-6689 www.fairviewmicrowave.com sales@fairviewmicrowave.com Configuration:

  • N Male Connector
  • 50 Ohms
  • Straight Body Geometry
  • RG214 Interface Type
  • Crimp/Solder Attachment Features:
  • Operating Frequency of 11 GHz Max.
  • Excellent VSWR of 1.25:1
  • Gold Plated Beryllium Copper Contact Applications:
  • General Purpose Test
  • Custom Cable Assemblies

301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 M39012/01-0501 N Male (Plug) Connector For RG214 Cable, Crimp/Solder from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: M39012/01-0501 N Male (Plug) Connector For RG214 Cable, Crimp/Solder M39012/01-0501 URL: https://www.fairviewmicrowave.com/n-male-standard-rg214-connector-m39012-01-0501-p.aspx M39012/01-0501 DATA SHEET REV 1.1 Page 2 of 3

301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.1 Page 3 of 3 .827 21.01 .295 7.49 NOTE 2 1.309 33.24 LOCKWIRE HOLE 3X .027 MIN LOCKWIRE HOLE .438 11.11 NOTE 2 .098 2.49 NOTE 2 .406±.010 10.31±0.25 .500±.010 12.70±0.25 .687±.010 17.45±0.25 .187 4.75 RECOMMENDED CABLE STRIPPING DIMENSIONS NOTES: ASSEMBLY PROCEDURE1. A. TRIM CABLE TO THE DIMENSIONS SHOWN. SLIDE CRIMP SLEEVE BACK ONTO CABLE. B. SOLDER OR CRIMP CONTACT ONTO CENTER CONDUCTOR (.100 INCH HEX CRIMP SIZE); BACK OF CONTACT FLUSH WITH TRIMMED END OF CABLE DIELECTRIC. FLARE CUT END OF BRAID SLIGHTLY BY ROTATING DIELECTRIC. C. INSERT CABLE/CONTACT INTO REAR OF BODY, WITH ALL BRAID WIRES ON OUTSIDE OF CRIMP TAIL. PUSH CABLE IN UNTIL CONTACT SNAPS INTO INSULATOR. D. SLIDE CRIMP SLEEVE FORWARD UNTIL FLUSH WITH BODY AND CRIMP WITH .429 INCH HEX. 2. SHOWS INSIDE DIAMETER. REVISIONS REV. DESCRIPTION DATE APPROVED A INITIAL RELEASE 09/28/2022 AGANWANI TITLE THE INFORMATION AND DESIGN IN THIS DOCUMENT IS THE PROPERTY OF FAIRVIEW MICROWAVE CORPORATION. ALL RIGHTS RESERVED. DZINN AM39012/01-0501 ALL DIMENSIONS SHOWN ARE FOR REFERENCE ONLY. DRAWN BY THIRD-ANGLE PROJECTION SHEET OF A SCALE SIZE 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS REV 1 1 N/A ITEM NO.CAGE CODE THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. °ANGLES ± 1 ± 1/32 FRACTIONS.2 [5.08].X = ± .XX = ±.02 [ .51 ] TOLERANCES: CABLE LENGTH (L) TOLERANCES: T-Rev.D M39012/01-0501 DATA SHEET M39012/01-0501 N Male (Plug) Connector For RG214 Cable, Crimp/Solder