M390

M390 ADVANCEDENERGY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

©2022 Advanced Energy Industries, Inc. The Mikron® M390 ultra-fast high temperature blackbody calibrator is without parallel in its capability to produce very high temperature, high emissivity targets, and at the same time stabilize at the required temperature within a few minutes. The cavity is a graphite tube target with a 25 mm (1") diameter with an effective emissivity of 1.0 from 0.65 to 1.8 µm. Target temperature is sensed by a rapid response Impac® infrared thermometer which drives a PID controller to regulate the target temperature precisely to the desired value. PRODUCT HIGHLIGHTS  High effective emissivity 1.0 @ 0.65 to 1.8 µm  High accuracy  Excellent stability ±1°C per 8-hour period  Fast slew rate  Wide temperature range  Manufactured and tested to meet rigid quality control standards  Furnished with certificate of calibration traceable to NIST  RS232 (standard) or RS485 serial communication output TYPICAL APPLICATIONS  Infrared temperature sensors  Infrared thermal imaging systems  Spectroradiometers  High energy photon generators  Solar radiance simulation  Optical pyrometer MIKRON M390 High temperature blackbody calibration source with temperature range of 300 to 3000°C Temperature Range M390-A2 – PN 14029-A2 600 to 2300°C (1112 to 4172°F) M390-B2 – PN 14029-B2 600 to 2600°C (1112 to 4712°F) M390-C2 – PN 14029-C2 600 to 3000°C (1112 to 5432°F) M390-L1 – PN 14029-L1 300 to 2000°C (572 to 3632°F) Measurement Uncertainty ±0.25% of reading ±1 °C Emissivity Effective 1.0 @ 0.6 to 1.8 µm Heated Cavity Shape Closed end graphite tube 292 mm (11.5") long with approximately 127 mm (5") heated length (field replaceable) Exit Port Diameter 25 mm (1") AT A GLANCE

2 advancedenergy.com MIKRON M390 Measurement Specifications Temperature Range M390-A2 – PN 14029-A2: 600 to 2300°C (1112 to 4172°F) M390-B2 – PN 14029-B2: 600 to 2600°C (1112 to 4712°F) M390-C2 – PN 14029-C2: 600 to 3000°C (1112 to 5432°F) M390-L1 – PN 14029-L1: 300 to 2000°C (572 to 3632°F) Temperature Uncertainty ±0.25% of reading ±1°C Temperature Resolution 1°C Stability ±1°C Source Non-Uniformity Non-uniformity: ±0.1% ± 1°C of reading within the center ½ of diameter Heated Cavity Shape Closed end graphite tube 292 mm (11.5”) long with approximately 127 mm (5”) heated length (field replaceable) Exit Port Diameter 25 mm (1”) Emissivity ε 1.0 (effective from 0.6 to 1.8 µm) ~0.96 (effective from 3 to 15 µm) Calibration Method Standard: Radiometric (pyrometric) Temperature Sensor Custom infrared thermometer Impac IGA 6 Warm-up Time 5 minutes from 600 to 2300°C, typical Slew Rate to 1°C Stability ~325°C / min 600 to 1100°C ~700°C / min T > 1100°C OVERVIEW TECHNICAL DATA Blackbody calibration sources are infrared radiators used for calibrating and verifying the output signals of infrared thermometers (pyrometers), thermal imaging systems, heat flux measurement systems, or spectrographic analysis systems. Advanced Energy supplies a unique selection of very precise calibration sources that are traceable to national standards. Quotations for custom designs and variations are available upon request. Mikron calibration sources have long been the gold standard to calibrate the instruments that keep your operations up and running. These blackbodies are superior because of the emissivity values, homogeneous emission areas, and a wide range of different sized apertures to adapt to the desired target area. In addition, fast heat-up times and high temperature stability are guaranteed. The quality of our calibration sources is guaranteed by tests, burn-in times, and radiometric calibrations. On most models, a certificate is provided to document the traceability to the international temperature scale ITS90 and NIST. The source and the controller are housed in separate modules, which allow the source to be positioned in a location remote from the controller such as in an environmental test chamber, or to be used in tests which involve long path lengths. Each module is fitted with a carrying handle and can be comfortably carried to manufacturing plant or field research locations. 1 NIST traceable calibration up to 2700°C. Temperatures > 2700°C are provided on a ‘best effort’ basis only. 2 Accuracy calibration performed radiometrically, the uncertainty of emissivity and transfer standard are already included 3 Provided stable AC mains voltage and minimum air flow across the exit port or emitter plate.

advancedenergy.com 3 MIKRON M390 Communication and Electrical Specifications Remote Set Point RS232 serial communication output standard, RS485 optional Method of Control Digital PID controller Power Requirements M390-A2 – PN 14029-A2: 15k VA 1 ph M390-B2 – PN 14029-B2: 15k VA 1 ph M390-C2 – PN 14029-C2: 24k VA 1 ph M390-L1 – PN 14029-L1: 15k VA 1 ph 208 to 230 VAC @ 50 and 60 Hz, 15k VA or 24k VA (depends on model) Power Connector (Customer Supplied) 15k VA: Must use plug that complies with IEC-309 @ 75 Amps @ 220 / 230 VAC 24k VA: Must use plug that complies with IEC-309 @ 125 Amps @ 220 / 230 VAC Environmental Specifications Operating Ambient Temp 0 to 44°C (32 to 110°F) Cooling Water cooled. Standard (garden) hose connections on rear, 3.8 lpm (1 gpm minimum, 2 gpm recommended) Cooling Inlet Pressure 90 PSI (621 kPa) maximum. Customer is responsible to provide pressure safety valves at inlet and outlet. Outlet (drain) must not be blocked Purge Gas Argon High Purity (99.99% pure) Purge Gas Inlet Pressure 25 PSI (172 kPa) maximum. Customer is responsible to provide over pressure safety valves at inlet Heating Element Type Graphite tube with argon gas purge, 226 L/h (8 to 10 cfh) Operating Humidity 0 to 90% RH non-condensing Dimensions (H x W x D) 1710 x 560 x 820 mm (67.3 x 22 x 32.3 in) Weight 182 kg (400 lb) CE Certified Yes TECHNICAL DATA (CONTINUED) 1 Customer supplied direct, fuse box wiring or connectors.

4 advancedenergy.com MIKRON M390 REFERENCE NUMBERS PN Description 14029-A2 M390-A2, 600 to 2300°C, 25 mm, 208 to 230 VAC @ 50 and 60 Hz 1 ph 15k VA 14029-B2 M390-B2, 600 to 2600°C, 25 mm, 208 to 230 VAC @ 50 and 60 Hz 1 ph 15k VA 14029-C2 M390-C2, 600 to 3000°C, 25 mm, 208 to 230 VAC @ 50 and 60 Hz 1 ph 24k VA 14029-L1 M390-L1, 300 to 2000°C, 25 mm, 208 to 230 VAC @ 50 & 60 Hz 1 ph 15k VA ACCESSORIES PN Description 14002-1 Cold aperture wheel assembly, 6 apertures 25.4 to 2.54 mm, for M300, M305, M330, M335, M39 14002 Cold aperture wheel assembly, 6 apertures 50 to 1.56 mm, for M300, M305, M330, M335, M390 19140-485 Serial Communication Output RS485 (built-in ex works) for M300, M305, M315X, M335, M345X, M360, M360A, M390

3840820 IGA 12-TSP , 1570 nm, 250" 1400°C, through lens sighting, laser targeting, focusable Optics 2

3840810 IS 12-TSP , 940 nm, 600 to 2520°C, through lens sighting, laser targeting, focusable Optics 2

3840820 IS 12-TSP , 940 nm, 600 to 3000°C, through lens sighting, laser targeting, focusable Optics 2

3840760 IS 12-TSP , 650 nm, 850 to 2520°C, through lens sighting, focusable Optics 2

14880-4SP1 Replacement cavity kit for M390-A2,B2,C2,L1 14880-4SP2 Replacement electrodes, quartz tube, o-rings kit for M390-A2,B2,C2,L1

ENG-M390-235-02.10.19.22 DS TITLE ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. AE’s power solutions enable customer innovation in complex semiconductor and industrial thin film plasma manufacturing processes, demanding high and low voltage applications, and temperature-critical thermal processes. With deep applications know-how and responsive service and support across the globe, AE builds collaborative partnerships to meet rapid technological developments, propel growth for its customers and power the future of technology. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2022 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, Mikron®, Impac®, and AE® are U.S. trademarks of Advanced Energy Industries, Inc. For international contact information, visit advanced-energy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 TRUST