M315-HT ADVANCEDENERGY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
©2019 Advanced Energy Industries, Inc. The Mikron® M315-HT is a two-piece portable blackbody calibration source with a digital indicating temperature controller that can be set at any temperature between ambient 5 to 450°C (9 to 842°F). Once set, the source temperature is controlled to within ±0.3°C by an internal RTD sensor. The unit has an emissivity of 1.00 @ 8 to 14 µm. The M315-HT calibration source and the digital indicating temperature controller are contained in separate housings to allow greater flexibility in positioning the instrument within an installation, e.g. long path calibration. PRODUCT HIGHLIGHTS Excellent general purpose calibration High effective emissivity 1.00 @ 8 to 14 µm Large aperture (3" diameter) High accuracy, high resolution Excellent stability ±0.3°C per 8-hour period Manufactured and tested to meet rigid quality control standards Furnished with certificate of calibration traceable to NIST RS232 serial communication included TYPICAL APPLICATIONS Infrared thermal imaging systems Spectrophotometers Aerial mapping Surveillance equipment MIKRON M315-HT Portable, two-piece low temperature blackbody calibration source with a large surface area. Ambient +5 to 450°C (+9 to 842°F). Temperature Range Ambient +5 to 450°C (+9 to 842°F) Measurement Uncertainty 0.25% of reading ±1°C Emissivity 1.00 effective emissivity at 8 to 14 µm Heated Emitter Shape Flat plate Aperture Diameter 76 mm (3.00 in) Warm-up Time < 30 minutes from ambient to 400°C AT A GLANCE
2 advancedenergy.com MIKRON M315-HT Measurement Specifications Temperature Range Ambient +5 to 450°C (+9 to 842°F) Temperature Uncertainty 0.25% of reading ±1°C Display Accuracy vs. NIST Calibration See supplied NIST calibration report Temperature Resolution 0.1°C Stability ±0.3°C per 8-hour period Source Non-Uniformity Approximate ±1°C @ 250°C, ±2°C @ 400°C Heated Cavity Shape Flat plate Exit Port Diameter 76 mm (3.00 in) Emissivity ε 1.00 effective emissivity @ 8 to 14 µm Standard Calibration Method Radiometric @ 8 to 14 µm Temperature Sensor Precision platinum RTD Warm-up Time < 30 minutes from ambient to 400°C Slew Rate to 1°C Stability Approximately 6 min for + 50°C change Slew Rate to 0.1°C Stability Approximately 10 min for + 50°C change Environmental Specifications Operating Ambient Temp 0 to 44°C (30 to 110°F) Cooling Fan cooled, air inlet on rear panel Operating Humidity 90% RH max, non-condensing Dimensions (H x W x D) Blackbody: 207.3 mm x 280.4 mm x 266 mm (8.2" x 11" x 10.5") Controller: 207.3 mm x 280.4 mm x 266 mm (8.2" x 11" x 10.5") Weight Blackbody: 4.9 kg (10.8 lbs) Controller: 3.2 kg (7 lbs) CE Certified Yes OVERVIEW TECHNICAL DATA Blackbody calibration sources are infrared radiators used for calibrating and verifying the output signals of infrared thermometers (pyrometers), thermal imaging systems, heat flux measurement systems, or spectrographic analysis systems. Advanced Energy supplies a unique selection of very precise calibration sources that are traceable to national standards. Quotations for custom designs and variations are available upon request. Mikron calibration sources have long been the gold standard to calibrate the instruments that keep your operations up and running. These blackbodies are superior because of the emissivity values, homogeneous emission areas, and a wide range of different sized apertures to adapt to the desired target area. In addition, fast heat-up times and high temperature stability are guaranteed. The quality of our calibration sources is guaranteed by tests, burn-in times, and radiometric calibrations. On most models, a certificate is provided to document the traceability to the international temperature scale ITS90 and NIST. 1 Accuracy calibration performed radiometrically, the uncertainty of emissivity and transfer standard are already included. 2 Provided stable AC mains voltage and minimum air flow across the exit port or emitter plate.
advancedenergy.com 3 MIKRON M315-HT Communication and Electrical Specifications Remote Set Point Via RS232 Method of Control Digital PID controller Power Requirements 115 VAC ±10% 50 and 60 Hz 600 W max (230 V optional) TECHNICAL DATA (CONTINUED) REFERENCE NUMBERS PN Description 14960-4 M315-HT, Ambient 5 to 450°C, 76 mm, 115 VAC @ 50 and 60 Hz 14960-3 M315-HT, Ambient 5 to 450°C, 76 mm, 230 VAC @ 50 and 60 Hz
ENG-M315HT-235 -02 10.19 DS TITLE For international contact information, visit advancedenergy .com. sales.support@aei.com +1 970 221 0108 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. AE’s power solutions enable customer innovation in complex semiconductor and industrial thin film plasma manufacturing processes, demanding high and low voltage applications, and temperature-critical thermal processes. With deep applications know-how and responsive service and support across the globe, AE builds collaborative partnerships to meet rapid technological developments, propel growth for its customers and power the future of technology. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2019 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, Mikron®, and AE® are U.S. trademarks of Advanced Energy Industries, Inc.