M2YV MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
MODEL: M2YV M2YV SPECIFICATIONS ES-5020 Rev.5 Page 1/3 http://www.m-system.co.jp/ Super-mini Signal Conditioners Mini-M Series ISOLATOR Functions & Features
- Galvanically isolating the input and output signals
- Universal power input
- High-density mounting Typical Applications
- Isolation between control room and field instrumentation
- Eliminating ground loops Model SPAN ZERO 23 (.91) (2.99) 124 (4.88) mm (inch) MODEL: M2YV–[1][2]–[3][4]
ORDERING INFORMATION
- Code number: M2YV-[1][2]-[3][4] Specify a code from below for each of [1] through [4]. (e.g. M2YV-6A-M/Q)
- Specify the specification for option code /Q (e.g. /C01/V01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) Voltage 6: 1 – 5 V DC (Input resistance 1 MΩ min.) [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 750 Ω max.) Voltage 6: 1 – 5 V DC (Load resistance 5000 Ω min.) [3] POWER INPUT AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) DC Power R2: 11 – 27 V DC (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating ADJUSTMENT /V01: Multi-turn fine adjustment TERMINAL SCREW MATERIAL /S01: Stainless steel GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3 screw terminals (torque 0.8 N·m) Screw terminal: Chromated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange output: Approx. -10 to +120 % at 1 – 5 V Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) INPUT SPECIFICATIONS ■ DC Current: Shunt resistor attached to the input terminals (0.5 W) INSTALLATION Power Consumption
- AC: Approx. 3 VA at 100 V Approx. 4 VA at 200 V Approx. 5 VA at 264 V
- DC: Approx. 3 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 150 g (0.33 lb)
MODEL: M2YV M2YV SPECIFICATIONS ES-5020 Rev.5 Page 2/3 http://www.m-system.co.jp/ PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) EXTERNAL DIMENSIONS unit: mm (inch) 21.5 (.85) 70.5 (2.78) 6 (.23) 59 (2.32) DIN RAIL 35mm wide [4 (.16)] 8–M3 SCREW 72 (2.83) 23 (.91) 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 114 (4.49)
- When mounting, no extra space is needed between units. 14 13 4 (.16) TERMINAL ASSIGNMENTS unit: mm (inch) 912 INPUT RESISTOR (model: REM2) 19 (.75) Input shunt resistor attached for current input.
MODEL: M2YV M2YV SPECIFICATIONS ES-5020 Rev.5 Page 3/3 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Base Socket SZ
1 Low Drift
U(+) V(–) POWER *Input shunt resistor attached for current input. INPUT R Specifications are subject to change without notice.