M2PJ-90A11-28

M2P OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

Indicator (Rectangular) M2P Large Rectangular-bodied Indicators

• Excellent illumination with even surface brightness.  Three-color models (green, orange, red; chameleon lighting) included in lineup. Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety Precautions of A3P. List of Models Model Appearance M2PJ (Rectangular) M2PA (Square) M2PT (Round) 52 max. 6.7 52 max. 6.7 52 max.6.4 32 dia. ■ Panel cutout dimensions: Refer to page 12. ■ Dimensions: Refer to page 11. ■ Accessories, replacements, and tools: Refer to the A3P. ■ Specifications: Refer to the A3P.

and Socket. For information on combinations, refer to Ordering Information. (4) (5) (1) (2) (3) Upper Lower (2) Screen Pattern *1. With chameleon models, the whole screen lights red, green, or orange. When not lit, the display is white.

• The available rectangular models are shown below. Select from among the individual products shown on page 7. The above diagrams show the Sockets with the “ ” mark facing down. Colored-illumination models up to the 4-split screen models are available as individual Units. Refer to page 7. “Colored-illumination” models operate in the way shown below: Illumination-only models Symbol Screen pattern Single screen 2-split screen G Chameleon *1 Note: The chameleon screen pattern is not available with M2PT models. The chameleon screen pattern is only available with 12 or 24-VDC models. Vertical 2-split screen models 4-split screen models Horizontal 3-split screen models Vertical 3-split screen models Unlit White Lit The built-in LED is colored. Color R (Red) Upper W (White) Lower (3) Case Color Note: M2PT model is available in light gray only. Symbol Color 1B l a c k

2 Light gray

(1) Shape of Display Symbol Shape J Rectangular A Square T Round Number of Built-in LED Lamps *2. These split screen models are available only as individual Units. They cannot be ordered as sets. Screen pattern A3PJ A3PA A3PT Single screen Built-in LED models Horizontal 2- split screen --- Vertical 2-split screen Horizontal 3- split screen Vertical 3-split screen 4-split screen *2 --- --- (4) Lighting Method LED-lighted Models (M2PJ and M2PA Only) LED Lamp-lighted Models (M2PT Only) Note: M2PJ and M2PA can also be ordered separately. Refer to page 7 for details. Incandescent Lamp lighted Models Symbol Rated voltage 05E 5 VDC 12E 12 VDC 24E 24 VDC Symbol Rated voltage 05C 5 VDC 12C 12 VDC 24C 24 VDC Symbol Rated voltage 06 6 VAC/VDC 14 14 VAC/VDC 28 28 VAC/VDC (5) Color of Display For LED

• The chameleon screen pattern is not available with M2PT models.
• The chameleon screen pattern is only available with 12 or 24-VDC models. For Incandescent Lamp
• Includes colored plate. Refer to page 8 for details.
• (Low-power incandescent lamp) Symbol Color RR e d O Orange G Green W White K Chameleon Symbol Color No symbol Red, Orange, White, Blue, Green Number of Built-in Incandescent Lamps Screen pattern A3PJ A3PA A3PT Single screen 2 1 2 Horizontal 2- split screen 4 (Low- power incan- descent lamp) 2- - - Vertical 2-split screen --- --- 3-split, E shape/ T shape --- --- 4-split screen --- ---

Ordering Information

the Display, Lamp, and Socket. M2PJ (Rectangular) Single Screen Models Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red MPJ-90A11-24E R *1. You can change the screen colors of chameleon models between r ed, green, and orange by changing the terminal wiring. Refer to page 14 for details. *2. Incandescent lamps are supplied with colored plates (white, re d, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. Note: Enter the desired color symbols for the Display in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White. * Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. Case color Black Light gray Display color symbol Lighting method LED

5 VDC M2PJ-90A11-05E(1) M2PJ-90A12-05E(1) R

O G W

12 VDC M2PJ-90A11-12E(1) M2PJ-90A12-12E(1)

24 VDC M2PJ-90A11-24E(1) M2PJ-90A12-24E(1)

12 VDC M2PJ-90AG1-12EK M2PJ-90AG2-12EK

24 VDC M2PJ-90AG1-24EK M2PJ-90AG2-24EK

6 VDC/VAC M2PJ-90A11-06 M2PJ-90A12-06

*214 VDC/VAC M2PJ-90A11-14 M2PJ-90A12-14

28 VDC/VAC M2PJ-90A11-28 M2PJ-90A12-28

Black Light gray Display color symbol Lighting method LED 24 VDC M2PJ-90A21-24E(1)(2) M2PJ-90A22-24E(1)(2) R O G W Incandes- cent lamp

6 VDC/VAC M2PJ-90A21-06 ---

*14 VDC/VAC M2PJ-90A21-14 M2PJ-90A22-14

28 VDC/VAC M2PJ-90A21-28 M2PJ-90A22-28

Example: Red Upper M2PJ-90A21-24E R W White Lower Red White Single screen (1) Rectangular (Single Screen) 2-split screen (1) (2) Rectangular (Single Screen) Individual models: Refer to pages 6 to 8. (The Display, Lamp, and Socket can be ordered separately.) ■ Specifications: Refer to the A3P. ■ Dimensions: Refer to page 11. Accessories: Refer to the A3P.

the Display, Lamp, and Socket. M2PA (Square) Single Screen Models Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red M2PA-90A11-24E R *1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 14 for details. *2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. Note: Enter the desired color symbols for the Display in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White. * Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. M2PT (Round) Single Screen Models Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red M2PT-90A12-24C R * Incandescent lamps are supplied with a colored plates (white, red, green, blue, and orange). Use the appropriate combination. Models A3PT and M2PT (round models), however, are not supplied with legend plates. Case color Black Light gray Display color symbolLighting method LED

5 VDC M2PA-90A11-05E(1) M2PA-90A12-05E(1)

ROGW12 VDC M2PA-90A11-12E(1) M2PA-90A12-12E(1)

24 VDC M2PA-90A11-24E(1) M2PA-90A12-24E(1)

Chameleon 12 VDC M2PA-90AG1-12EK M2PA-90AG2-12EK *124 VDC M2PA-90AG1-24EK M2PA-90AG2-24EK Incandescent lamp

6 VDC/VAC M2PA-90A11-06 M2PA-90A12-06

*214 VDC/VAC M2PA-90A11-14 M2PA-90A12-14

28 VDC/VAC M2PA-90A11-28 M2PA-90A12-28

Case color Black Light gray Display color symbolLighting method LED 24 VDC M2PA-90A21-24E(1)(2) M2PA-90A22-24E(1)(2) R O G W Incandescent lamp

6 VDC/VAC M2PA-90A21-06 M2PA-90A22-06

*14 VDC/VAC M2PA-90A21-14 M2PA-90A22-14

28 VDC/VAC M2PA-90A21-28 M2PA-90A22-28

Example: Red Upper M2PA-90D21-24E R W White Lower Red White Case color Light gray Display color symbolLighting method LED

5 VDC M2PT-90A12-05C(1)

ROGW12 VDC M2PT-90A12-12C(1)

24 VDC M2PT-90A12-24C(1)

28 VDC/VAC M2PT-90A12-28 *

(Single Screen) Single screen (1) Square (Horizontal 2-split screen) 2-split screen (1) (2) Round (Single Screen) Single screen (1) Individual models: Refer to pages 6 to 8. (The Display, Lamp, and Socket can be ordered separately.) ■ Specifications: Refer to the A3P. ■ Dimensions: Refer to page 11. Accessories: Refer to the A3P.

Illumination-only and Colored-illumination LED Models “Illumination only” describes LED models for which the screen color is the same whether the LED is lit or not. The screen simply becomes brighter when the LED lights. Example: Red LED “Colored illumination” describes LED models for which the screen color is white when the LED is not lit and changes to the color of the LED lamp when the LED is lit. Example: Red LED Ordering: For a colored-illumination Indicator, order the Display, Lamp, and Socket as shown in the following table. Display Lamp Socket

• Select the LED lamp-lighted model required from the selection on page 7. Each assembly includes the number of white colored plates required to enable colored illumination for the corresponding screen-split configuration. For example, 4-split screen models includes 4 white colored plates.
• Select the LED lamps to suit your desired coloration from the selection on page 8.
• Number of necessary LED lamps (standard): M2PJ (rectangular): 4 M2PA (square): 2 M2PT (round): 2
• Select from the Sockets on page 8. Legend plate (transparent) Cap (transparent) Not lit Red Colored plate (red) Lamp holder LED lamp (red) - - - Lamp Display Lit Red Legend plate (transparent) Cap (transparent) Not lit White Colored plate (white) Lamp holder LED lamp (red) - - - Lamp Display Lit Red

created using individual Units. Also, store the parts as spares for maintenance and repairs. * The Socket is compatible with LED-lighted, LED lamp-lighted, and incandescent lamp-lighted models. LED-lighted/Chameleon Models (LED is built into the Display.) LED Lamp-lighted Models (LED lamp and Display are separate.) Incandescent Lamp-lighted Models (Incandescent lamp and Display are separate.) Display Display Display Round (M2PT) models not available. Lamp (LED Lamp) *1 Lamp (Incandescent Lamp) *2 Socket * Socket * Socket * *1. Number of necessary LED lamps. *2. Number of necessary incandescent lamps. Screen pattern M2PJ M2PA M2PT Screen pattern M2PJ M2PA M2PT Single screen 2 2 Single screen 2 1 2 Horizontal 2-split screen 2- - - Horizontal 2-split screen 4 (low- power in- candes- cent lamp) 2 --- Vertical 2-split screen --- --- Vertical 2-split screen --- --- Vertical 3-split screen Horizontal 3-split screen --- --- Vertical 3-split screen Horizontal 3-split screen --- --- 4-split screen --- --- 4-split screen --- --- (for Indicator)

• M2P@-502@ (for Indicator)
• M2P@-501@ (for Indicator) SLL-@@E@
• Standard lamp: SLL-@@
• Low-power lamp: SLL-@@H (for Indicator) (for Indicator) (for Indicator) Ordering set combinations: Refer to pages 3 to 4. ■ Specifications: Refer to the A3P. ■ Dimensions: Refer to page 11. Accessories: Refer to the A3P.

created using individual Units. Also, store the parts as spares for maintenance and repairs. LED-lighted Models (LED is built-in.) Note: 1. A cap, legend plate (transparent), colored plate, white plunger case, and LED (with a current-limiting resistor) are bui lt into the standard lighting unit. 2. Split-screen coloring configurations are given with the “ ” mark on the Sockets facing down. LED Lamp-lighted Models (LED is not built-in.) * The following types of colored plates are included with Horizontal and Vertical 3-splitScreen Switches. White: One colored plate for a 2-split screen and two colored plates for a 4-split screen. Red, green, or orange: One colored plate for a 2-split screen and one colored plates for a 4-split screen. Display Appearance Split-screen color (color symbol) White (W) Red (R) Green (G) Orange (O) Selection precautions Rectangular models Single screen M2PJ-5701-@@E M2PJ-5702- @@E M2PJ-5703- @@E M2PJ-5706- @@E • Enter the voltage to be used in the @@ at the end of the model number. Examples of voltage used:

5 V= 0 5 E

12 V= 1 2 E

24 V= 2 4 E

support only 24V.

• For the color of the shaded part, select the model according to the colors given at the top of the table. Horizontal 2- 2 split screen M2PJ-5711-@@E M2PJ-5712- @@E M2PJ-5713- @@E M2PJ-5716- @@E M2PJ-5721-@@E M2PJ-5722- @@E M2PJ-5723- @@E M2PJ-5726- @@E M2PJ-5731-@@E M2PJ-5732- @@E M2PJ-5733- @@E M2PJ-5736- @@E M2PJ-5741-@@E M2PJ-5742- @@E M2PJ-5743- @@E M2PJ-5746- @@E Square models Single screen M2PA-5701-@@E M2PA-5702- @@E M2PA-5703- @@E M2PA-5706- @@E Horizontal 2-split screen M2PA-5711-@@E M2PA-5712- @@E M2PA-5713- @@E M2PA-5716- @@E M2PA-5721-@@E M2PA-5722- @@E M2PA-5723- @@E M2PA-5726- @@E M2PA-5731-@@E M2PA-5732- @@E M2PA-5733- @@E M2PA-5736- @@E M2PA-5741-@@E M2PA-5742- @@E M2PA-5743- @@E M2PA-5746- @@E Model Rectan- gular models Square models Round models Selection precautions Screen pattern Screen Model Screen Model Screen Model Single screen M2PJ-5021 M2PA-5021 M2PT-5021
• Colored plates (white, red, green, and orange), a legend plate (transparent), and a light baffle (split-screen models only) are included. Use the appropriate combination for the LED coloring required.
• The number of white colored plates required to enable colored illumination for the corresponding screen-split configuration is included. (For example, 4-split screen models include 4 white colored plates).
• The number of colored plates included for each model are shown in the following table. Horizontal 2-split screen M2PJ-5022 M2PA-5022 --- Vertical 2-split screen M2PJ-5023 --- --- Horizontal 3-split screen M2PJ-5024 --- --- Vertical 3-split screen M2PJ-5025 --- --- 4-split screen M2PJ-5026 --- --- White Red Green Orange White Red Green Orange Screen pattern White Red Green Orange Single screen 1 1 1 1 Horizontal 2-split screen Vertical 2-split screen 2111 Horizontal 3-split screen Vertical 3-split screen * 3222 4-split screen 4 1 1 1 Ordering set combinations: Refer to pages 3 to 4. ■ Specifications: Refer to the A3P. ■ Dimensions: Refer to page 11. Accessories: Refer to the A3P.

be created using individual Units. Also, store the parts as spares for maintenance and repairs. Incandescent Lamp-lighted Models (Incandescent lamp is not built-in.) * The following types of colored plates are included with Horizontal and Vertical 3-splitScreen Switches. All colors: One colored plate for a 2-split screen and one colored plate for a 4-split screen. Chameleon Models (with Built-in LED) LED Lamp Incandescent Lamp Display Model Rectan- gular models Square models Round models Selection precautions Screen pattern Screen Model Model Model Model Model Single screen M2PJ-5011 M2PA-5011 M2PT-5011 * • Colored plates (white, red, green, orange, and blue), a legend plate (transparent), and a light baffle (split-screen models only) are supplied. * M2PT (round) models do not contain a legend plate.

• The number of colored plates supplied is shown in the following table. Horizontal 2- split screen M2PJ-5012 M2PA-5012 --- Vertical 2-split screen M2PJ-5013 --- --- Horizontal 3- split screen M2PJ-5014 --- --- Vertical 3-split screen M2PJ-5015 --- --- 4-split screen M2PJ-5016 --- --- Shape Rated voltage Chameleon indicator Rectangular

12 VDC M2PJ-5800-12E

Note: 1. With the chameleon models, the whole screen lights red, green, or orange (i.e., red and green simultaneously). 2. A cap, legend plate (transparent), white colored plate, and LED (with a current-limiting resistor) are built into the Display.

24 VDC M2PJ-5800-24E

12 VDC M2PA-5800-12E

24 VDC M2PA-5800-24E

Lamp (For mounting, refer to the A3P.) Voltage 5 VDC 12 VDC 24 VDC Applicable cap (color) (colored plate) Selection precautionsColor Model (DC only) Model (DC only) Model (DC only) Red SLL-05ER SLL-12ER SLL-24ER Red In the standard setup, 4 LED lamps are used with M2PJ models and 2 LED lamps are used with M2PA and M2PT models. Yellow SLL-05EY SLL-12EY SLL-24EY Orange Green SLL-05EG SLL-12EG SLL-24EG Green White SLL-05EW SLL-12EW SLL-24EW White Voltage Lamp type Standard lamp Low-voltage lamp Selection precautions 5 VAC/VDC SLL-06 SLL-06H • In the standard setup for M2PJ models, 2 lamps are used with single screen models, and 4 lamps are used with split-screen models. If 3 or 4 lamps are lit continuously, use low- power lamps.

• In the standard setup for M2PA models, 1 lamp is used with single screen models, and 2 lamps are used with split-screen models.
• In the standard setup for M2PT models, 2 lamps are used.

12 VAC/VDC SLL-14 SLL-14H

24 VAC/VDC SLL-28 SLL-28H

Socket (common to both incandescent lamp-lighted and LED-lighted models) Rectangular Square Round Selection precautions Model Model Model M2PJ-7010-1 M2PA-7010-1 M2PT-7010-2

• The end digit denotes the color of the flange: -1 denotes a black flange, and -2 denotes a light gray flange. Round switches are available only in light gray, and not in black. Screen pattern White Red Green Orange Blue S i n g l e s c r e e n 11111 Horizontal 2-split screen Vertical 2-split screen 11111 Horizontal 3-split screen Vertical 3-split screen * 22222 4-split screen 2 2 2 2 2 Ordering set combinations: Refer to pages 3 to 4. ■ Specifications: Refer to the A3P. ■ Dimensions: Refer to page 11. Accessories: Refer to the A3P.

Accessories are the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P. LED and Incandescent Lamp Ratings and Characteristics Ratings and characteristics the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P. Approved Standard Ratings UL (File No. E41515), CSA (File No. LR45258) LED: 24 VDC max. Incandescent lamp: 28 VAC/VDC,1.2 W max. Note: Certification has been obtained for the Indicator. For detailed information on individual products that have received certification, consult your supplier. Nomenclature Construction LED-lighted models LED-lighted models LED lamp-lighted models Incandescent lamp-lighted models Cap (transparent) Legend plate (transparent) Colored plate LED Unit Built-in LED Chameleon models (full screen illumination in one of three colors) Cap (transparent) Legend plate (transparent) LED Unit 3-color emitter Colored plate Cap (transparent) Legend plate * (transparent) Colored plate Lamp holder Display Lamp Socket

• Display Colors:
• LED-lighted and LED lamp-lighted models White, Red, Green, Orange
• Incandescent lamp-lighted models White, Red, Green, Blue, Orange * Incandescent lamp-lighted M2PT models do not contain legend plates.
• Case Color Select either black or light gray to suit your panel design. (The round M2PT models are available in light gray only.) (Split-screen models contain light baffles.) Lighting method LED-lighted models (LED is built-in.) LED lamp-lighted models (LED is not built-in.) Incandescent lamp-lighted models (Incandescent lamp is not built-in.) Models M2PJ M2PA M2PJ M2PA M2PT M2PJ M2PA M2PT Screen pat- tern Single screen Single screen Single screen Vertical 3-split screen Single screen Single screen Single screen Vertical 3-split screen Single screen Single screen Horizontal 2- split screen Horizontal 2- split screen Horizontal 2- split screen Horizontal 3- split screen Horizontal 2-split screen Horizontal 2- split screen Horizontal 3- split screen Horizontal 2-split screen Chameleon (3-color) Chameleon (3-color) Vertical 2- split screen 4-split screen Vertical 2- split screen 4-split screen Note: The above diagram for LED lamp-lighted and incande scent lamp-lighted models shows the M2PJ model.

M2P Lighting Method Diagram Single screen models LED models Incandescent lamplighted models LED-lighted models LED lamp-lighted models Chameleon models Horizontal 2-split screen models M2PJ (rectangular) M2PA (square) M2PT (round) Single screen models Single screen models Vertical 3-split screen models Horizontal 3-split screen models 4-split screen models Vertical 3-split screen models* Horizontal 3-split screen models* 4-split screen models* Horizontal 2-split screen models (Full screen illumination in one of three colors) Vertical 2-split screen models Single screen models Horizontal 2-split screen models Single screen models Horizontal 2-split screen models Single screen models Horizontal 2-split screen models Single screen models Single screen models Single screen models Single screen models Horizontal 2-split screen models Vertical 2-split screen models* LED models LED models Incandescent lamplighted models Incandescent lamplighted models LED-lighted models LED lamp-lighted models LED lamp-lighted models Chameleon models

• As a set: See page 3.
• Individually: See page 6.
• Individually: See page 6. (Not available as a set.)
• As a set: See page 3.
• Individually: See page 6. As a set: See page 3. Individually: See page 6. *Models indicated with an asterisk are only available individually.
• As a set: See page 3.
• Individually: See page 6.
• As a set: See page 3.
• Individually: See page 6.
• Individually: See page 6. (Not available as a set.)
• As a set: See page 3.
• Individually: See page 6.
• As a set: See page 3.
• Individually: See page 6.
• As a set: See page 3.
• Individually: See page 6.

Dimensions (Unit: mm) Note: Use a panel thickness of 0.5 mm for tab terminals #110 and solder terminals. Accessory Mounting Dimensions Dimensions for mounting accessories are the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P. 2.8 #110 quick connect terminal /soldered terminal OMRON logo 26.1 29.9±0.2 25±0.1 32±0.1 18.9 6.7 43.6 52 max. 22.9±0.2 0.5 M2PJ (Rectangular) Models OMRON logo #110 quick connect terminal /soldered terminal 43.6 22.9±0.2 6.7 52 max. @19.125±0.1 25±0.1 M2PA (Square) Models 22.4 28.5 dia. OMRON logo 23.8 43.6 32 dia. 24.9 dia. 6.4 52 max. #110 quick connect terminal/soldered terminal M2PT (Round) Models

Dimensions (Unit: mm) Panel Cutout M2PJ (Rectangular) Models Note: 1. n: Number of Units 2. Recommended panel thickness: 1 to 5 mm 3. Mount the panel before mounting the Switch Guard. 4. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating. M2PA (Square) Models Note: 1. n: Number of Units 2. Recommended panel thickness: 1 to 5 mm 3. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating. M2PT (Round) Models Classification Mounting design Panel cutout Remarks Flange mount models Individual mount- ing (Horizontal) Panel cutout spacing between rows of Units:Multiple mount- ing (Horizontal) Individual mount- ing (Vertical) Mount to long mount- ing plate (A3PJ- 3002) before use. Multiple mount- ing (Vertical) Mount to long mount- ing plate (A3PJ- 3002) before use. Barrier mount models Individual mount- ing (Horizontal) For barrier mount models, refer to Ac- cessories on the A3P. Panel cutout spacing between rows of Units: Dotted line indicates the position of each mounting barrier. Multiple mount- ing (Horizontal) Individual mount- ing (Vertical) Mount to long mount- ing plate (A3PJ- 3002) before use. Multiple mount- ing (Vertical) Mount to long mount- ing plate (A3PJ- 3002) before use. Classification Mounting design Panel cutout Remarks Flange mount models Individual mount- ing Panel cutout spacing between rows of Units: Multiple mount- ing Barrier mount models Individual mount- ing Panel cutout spacing between rows of Units: Dotted line indicates the position of each mounting barrier. Multiple mount- ing 32±0.1 25±0.1 30.5±0.3 23.5±0.3 3 min. 6 min. 32n±0.5 23.5±0.3 25±0.1 32±0.1 23.5±0.3 30.5±0.3 25n±0.5 1 2n32±0.1 25n-1.5±0.3 30.5±0.3 27 36.4±0.3 23.5±0.3 6 min. 6 min. 1.3 33n+6±1 n2 127 32.9n+3.5±0.3 23.5±0.3 32±0.1 29.4±0.3 30.5±0.3 34 n12 26n+6±1 25.9n+3.5±0.3 30.5±0.3 25±0.1 25±0.1 22.5±0.3 23.5±0.3 33 min. 6 min. 25n±0.1 12 n25±0.1 25n-2.5±0.3 23.5±0.3 27.8±0.3 23.5±0.3 6 min.1.3 6 min. 26n+6.5±1 1n 227 26n+2.5±0.3 23.5±0.3 4 min. 6.4 dia. 29±0.3 dia. R11.8+0.2 − 0 Note: 1. Recommended panel thickness: 1 to 5 mm 2. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating

Dimensions (Unit: mm) Terminal connections LED-lighted Models Rated voltage

5 VDC 12 VDC 24 VDC

L4− L3− L1− L2− LC+ Terminal arrangement BOTTOM VIEW TOP VIEW Lighting block NO1 NC1 L4− L3− L1− L2− LC+ Terminal arrangement BOTTOM VIEW TOP VIEW Lighting block NO1 NC1 L4− L3− L1− L2− LC+ Terminal arrangement BOTTOM VIEW TOP VIEW Lighting block NO1 NC1 L4− L3− L1− L2− LC+ Terminal arrangement BOTTOM VIEW TOP VIEW Lighting block NO1 NC1 L4− L3− L1− L2− LC+ Terminal arrangement BOTTOM VIEW TOP VIEW Lighting block Terminal arrangement BOTTOM VIEW TOP VIEW NO1 NC1 L1− L2− LC+ Terminal arrangement BOTTOM VIEW TOP VIEW Lighting block NO1 NC1 L1− L2− LC+ Terminal arrangement BOTTOM VIEW TOP VIEW Lighting block NO1 NC1 L1− L2− LC+ Terminal arrangement BOTTOM VIEW TOP VIEW Lighting block NO1 NC1 L1− L2− LC+ NO1 NC1 L1− L2− LC+ Terminal arrangement BOTTOM VIEW TOP VIEW Lighting block

Incandescent Lamp-lighted/LED Lamp-lighted Models (All are shown with the OMRON logo facing down. The terminal arrangements are the same as for the LED-lighted models.) LED Chameleon Models Terminal Arrangement and Coloring Chameleon Models Safety Precautions Refer to Safety Precautions for All Pushbutton Switches/Indicators and Safety Precautions for the A3P. Model Rectangular M2PJ models Square M2PA models Round M2PT models Type Indicator Rated voltage

24 VDC

L4− LC+ L1− L2− L3− BOTTOM VIEW TOP VIEW Terminal arrangement Lighting block LC+ L1− L2− LC+ NC BOTTOM VIEW TOP VIEW Terminal arrangement Lighting bloc k L2− L1− L4− LC+ L1− L2− L3− LC+ L1− L2−

Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2015.5 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2015 All Right Reserved.