M2FV MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: M2FV M2FV SPECIFICATIONS ES-5106 Rev.7 Page 1/4 http://www.m-system.co.jp/ Super-mini Signal Conditioners Mini-M Series SIGNAL TRANSMITTER (field-configurable) Functions & Features

  • Converts DC input from a sensor into a standard process signal
  • DIP switch configurable input & output range and response time
  • High-density mounting
  • Power indicator LED Typical Applications
  • Isolation between control room and field instrumentation Model SPAN ZERO 23 (.91) (2.99) 124 (4.88) mm (inch) MODEL: M2FV-[1][2]

ORDERING INFORMATION

  • Code number: M2FV-[1][2] Specify a code from below for each of [1] and [2]. (e.g. M2FV-M2/CE/Q)
  • Specify the specification for option code /Q (e.g. /C01/S01) Orders will be shipped at default factory settings for Input (4 – 20mA ) and Output (4 – 20mA ) and Response time (Standard responce ). INPUT – Field-selectable Current 4 – 20 mA DC (Input resistance 50 Ω) 0 – 20 mA DC (Input resistance 50 Ω) Voltage 0 – 10 V DC (Input resistance 100 kΩ min.) 2 – 10 V DC (Input resistance 100 kΩ min.) 0 – 5 V DC (Input resistance 100 kΩ min.) 1 – 5 V DC (Input resistance 100 kΩ min.) OUTPUT – Field-selectable Current 4 – 20 mA DC (Load resistance 750 Ω max.) 0 – 20 mA DC (Load resistance 750 Ω max.) Voltage 0 – 10 V DC (Load resistance 10 kΩ min.) 2 – 10 V DC (Load resistance 10 kΩ min.) 0 – 5 V DC (Load resistance 5000 Ω min.) 1 – 5 V DC (Load resistance 5000 Ω min.) [1] POWER INPUT AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) (Select ‘/N’ for ‘Standards & Approvals’ code.) M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) R2: 11 – 27 V DC (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) (Select ‘/N’ for ‘Standards & Approvals’ code.) P: 110 V DC (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) [2] OPTIONS (multiple selections) Standards & Approvals (must be specified) /N: Without CE /CE: CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3 screw terminals (torque 0.8 N·m) Screw terminal: Chromated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange output: Approx. -10 to +120 %

MODEL: M2FV M2FV SPECIFICATIONS ES-5106 Rev.7 Page 2/4 http://www.m-system.co.jp/ Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) Power LED: Green LED turns on when the power is supplied. INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated INSTALLATION Power Consumption

  • AC: Approx. 3 VA at 100 V Approx. 4 VA at 200 V Approx. 5 VA at 264 V
  • DC: Approx. 3 W Operating temperature: -30 to +60°C (-22 to +140°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 150 g (0.33 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % I/O setting accuracy: ±0.2 % Temp. coefficient: ±0.015%/°C (±0.008%/°F) Response time: Standard response ≤ 0.5 sec. (0 – 90 %) Fast response ≤ 30 msec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Measurement Category II Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) RoHS Directive EN 50581

MODEL: M2FV M2FV SPECIFICATIONS ES-5106 Rev.7 Page 3/4 http://www.m-system.co.jp/ EXTERNAL VIEW OFF ON 1 2 3 4 5 6 SW2 ■ FRONT VIEW ■ SIDE VIEW OFF ON 1 2 3 4 SW1 Input Range and Response Time Setting Zero Adj. Span Adj. Power LED Output Range Setting Refer to the instruction manual for detailed procedures. EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 21.5 (.85) 70.5 (2.78) 6 (.23) 59 (2.32) DIN RAIL 35mm wide [4 (.16)] 8–M3 SCREW 72 (2.83) 23 (.91) 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 114 (4.49)

  • When mounting, no extra space is needed between units. 14 13 4 (.16) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Output Driver+ U( +) V( –) SZ OUTPUT POWER Base Socket Isolation Low Drift AmplifierINPUT POWER LED INPUT RANGE & RESPONSE TIME SELECTOR DIP SW OUTPUT RANGE SELECTOR DIP SW * Input shunt resistor incorporated for current input.

MODEL: M2FV M2FV SPECIFICATIONS ES-5106 Rev.7 Page 4/4 http://www.m-system.co.jp/ Specifications are subject to change without notice.