M281 SSOUSA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
1 Form A
The M281 is a bi-directional, single-pole, single-throw, normally open solid-state relay in a miniature 4-pin small outline package. This device offers very low on-resistance--allowing for a high load current rating in a miniature package, ideal in higher power applications where board space is limited.
DESCRIPTION
OPTIONS/SUFFIXES* SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS* APPROVALS Low On-Resistance (0.5 ohms MAX)• 1A Continuous Load Current• 60V load voltage rating• Low input control current (3mA TYP)• Miniature 4 pin SOP package• High input-to-output isolation (1.5kV MIN)• Automated Test Equipment• Meter reading systems• Medical equipment• Battery Monitoring• Multiplexers• Tape & Reel Option (2,000 pcs / reel)• -TR NOTE: Suffixes listed above are not included in marking on device for part number identification. PARAMETER UNIT MIN TYP MAX Storage Temperature °C -55 125 Operating Temperature °C -40 85 Continuous Forward Current mA 50 Peak Forward Current (1us) A 1 Reverse Input Control Voltage V 5 Output Power Dissipation mW 400 *The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability. UL / C-UL Approved (File # E201932)• Page 1 of 5 M281 rev 1.41 (04/03/2009) © 2009 Solid State Optronics • San José, CA
ELECTRICAL CHARACTERISTICS - 25°C PARAMETER UNIT MIN TYP MAX TEST CONDITIONS INPUT SPECIFICATIONS LED Forward Voltage V 1.2 1.5 If = 10mA LED Reverse Voltage V 61 2 Ir = 10uA Turn-on Current m 1 5 Io = 10mA, t = 20msA Turn-On Current m 2.1 5 Io = 1A, t = 5msA Turn-off Current m 0.5 5 Io = 100mAA OUTPUT SPECIFICATIONS Blocking Voltage V 60 Io = 1uA Continuous Load Currente m 1000 If = 5mAA On-Resistance Ω 0.5 0.7 Io = 1000mA Leakage Current µ 0.2 1 Vo = 60VA Output Capacitance p 25 50 Vo = 25V, f = 1.0MHzF Offset Voltage m 0.2 If = 5mAV COUPLED SPECIFICATIONS Isolation Voltage V 1500 T = 1 minuterm s Turn-on Time m 1.4 5 If = 5mA, Io = 1000mAs Turn-off Time m 0.2 2 If = 0mA, Io = 100mA, Vo = 20Vs Isolation Resistance G 100Ω Coupled Capacitance p 3F Contact Transient Ratio V 2000 7000 dV = 50Vrm s Page 2 of 5 M281 rev 1.41 (04/03/2009) © 2009 Solid State Optronics • San José, CA
Turn-Off Time (ms) Device Count M281 Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25°C On-Resistance (ohms) Device Count M281 0 5 10 15 20 25 30 35 Leakage Current (uA) Device Count Typical On-Resistance Distribution N = 100, Ambient Temperature = 25°C M281 Typical Leakage Current Distribution N = 100, Ambient Temperature = 25°C 60 65 70 75 80 85 90 95 Blocking Voltage (V) Device Count M281 200 400 600 800 1000 1200 -40 -20 0 20 40 60 80 Temperature (C) Load Current (mA) Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25°C M281 Maximum Load Current vs. Temperature Turn-On Time (ms) Device Count M281 Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25°C Page 3 of 5 M281 rev 1.41 (04 /03 /2009) © 2009 Solid State Optronics • San José, CA
4 PIN SMALL OUTLINE PACKAGE
rev 1.41 (04/03/2009) © 2009 Solid State Optronics • San José, CA
Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the applicat ion or use of any product or circuit described herein. Neither ci rcuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we mak e no other warranty, expressed or implied, including merchantability and fitness for particular use. DISCLAIMER LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of su ch use and agree to indemnify SSO against any an d all damages resulting from such use. Life support devices are def ined as devices or systems which, (a) are intended for surgical im plant into the body, or (b) support or sustain life, and (c) whose failure to perf orm when used properly in accordance with instructions for u se can be reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system whose failure can be reasonably expected to c ause failure of the life support device or system, or to affect its safety or effe ctiveness. Page 5 of 5 M281 rev 1.41 (04/03/2009) © 2009 Solid State Optronics • San José, CA