M25U BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Smooth, hygienic design for easy cleaning in food processing and other washdown • applications; rated IP69K, IEC IP67 (NEMA 6) Rugged stainless steel for use in demanding environments• Dual range/dual speed opposed mode ultrasonic sensors; ideal for sensing clear • objects or materials Highly immune to ambient sonic and electrical noise• Optional IP68 rated washdown cordset• 10 to 30V dc operating voltage• Models * M25U receivers may be wired for either of two speeds: Normal or High (see hookup diagrams, page 3). The Normal Speed mode offers a sensing range of 500 mm (19.7"). The Normal Speed mode maximizes sensing energy, as is required in demanding environments. The High Speed mode offers a sensing range of 250 mm (9.8"). The High Speed mode maximizes sensing response, as is needed in high-speed counting applications. Model Range* Supply Voltage Output Response Time M25UEQ8 Normal Speed: 500 mm (19.7") High Speed: 250 mm (9.8") 140KHz 10 to 30V dc — — M25URBQ8 Bipolar (1 NPN & 1 PNP) Normal Speed: 4.0 milliseconds High Speed: 3.0 milliseconds ULTRASONIC

P/N 137794 rev. D 3 Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 U-GAGE® M25U Series Sensor Specifications Sensing Range Normal Speed: 500 mm (19.7") High Speed: 250 mm (9.8") 140KHz Supply Voltage and Current Emitter: 10 to 30V dc (10% max. ripple) at less than 85 mA Receiver: 10 to 30V dc (10% max. ripple) at less than 38 mA (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Receiver Output Configuration Bipolar (1 NPN & 1 PNP) solid-state output; Normally Closed (output is activated when an object blocks the sensing beam) Output Rating 100 mA (each output) with short circuit protection; see Note 1 OFF-state leakage current: NPN: < 200 µA sinking PNP: < 10 µA sourcing ON-state saturation voltage: NPN: < 1.6V @ 100 mA PNP: < 3.0V @ 100 mA Output Protection Circuitry Protected against short circuit conditions Output Response Time Normal Speed: 4.0 milliseconds High Speed: 3.0 milliseconds Repeatability 1 millisecond Delay at Power-up < 250 milliseconds Delay for Switching Between Normal and High Speed 20 milliseconds Indicators Green Power LED: indicates Power ON Amber Output LED: indicates output activated Construction Housing: 316 Stainless Steel LED window: Polysulphone Connections Emitter: 4-pin Euro-Style QD Receiver: 5-pin Euro-Style QD Environmental Rating Leakproof design, rated IEC IP67 (NEMA 6), IP69K Operating Conditions Temperature: -20° to +70°C (-4° to +158° F) Max. Relative Humidity: 95% at 50°C non-condensing Vibration and Mechanical Shock acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms duration. Certifications Notes 1. NPN < 200 µA for load impedance > 3 KΩ; for load current of 100 mA, leakage < 1% of load current 2. When mounting the M25U, care should be taken to acoustically isolate the emitter and receiver to eliminate sound energy coupling between the sensor pair. This is best accomplished with elastomeric materials between the sensor and rigid mounting brackets. Hookups Emitter Receiver * NOTE: Connection of dc power is without regard to polarity. + 10-30V dc Shield* 10-30V dc Load Load * It is recommended that the shield wire be connected to either earth ground or DC common. Normal Speed (5-30V dc) High Speed (0-2V dc) 5-Pin Euro 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Key 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray

U-GAGE® M25U Series Sensor WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. P/N 137794 rev. D Quick-Disconnect Cables Mounting Brackets

  • Top mount
  • Swivel bracket with 25 mm mounting hole for sensor
  • Stainless steel with rounded edges for cleanliness in demanding environments
  • Non-metallic FDA compliant bushing for acoustically isolating M25U sensors
  • M10 x 1.5 mount on opposite side of clamping nuts SMBM25A
  • Bottom mount
  • Swivel bracket with 25 mm mounting hole for sensor
  • Stainless steel with rounded edges for cleanliness in demanding environments
  • Non-metallic FDA compliant bushing for acoustically isolating M25U sensors
  • M10 x 1.5 mount on same side as clamping nuts SMBM25B Standard Models Style Model Length Description Dimensions Pinout 5-Pin Euro-style Straight with shield MQDEC2-506 MQDEC2-515 MQDEC2-530 2 m (6.5') 5 m (15') 9 m (30') Cable: PVC jacket, PUR (polyurethane) connector body, nickel-plated brass coupling nut Conductors: 22 or 20 AWG high-flex stranded, gold plated contacts Voltage Rating: 250V ac/300V dc Temperature: -40° to +90 ° C Environmental Rating: IP67 5-Pin Euro-style Right-Angle with shield MQDEC2-506RA MQDEC2-515RA MQDEC2-530RA 2 m (6.5') 5 m (15') 9 m (30') Female 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray 5-Pin Euro 1M12 x 1 ø 15 mm 44 mm max. Euro Straight 38 mm max. M12 x 1 ø 15 mm Euro RA 38 mm max. Washdown Models Style Model Length Description Dimensions Pinout 5-Pin Euro-style Straight with shield MQDCWD-506 MQDCWD-530 2 m (6.5') 9 m (30') Cable: polypropylene jacket and connector body, stainless steel coupling nut Conductors: 22 AWG gold-plated brass contacts Voltage Rating: 250V ac Temperature: -40° to +105 ° C Environmental Rating: IP68 Female 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray 5-Pin Euro Accessories