M222 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Fully Hermetic Package
- Three Decade Coverage
- Impedance: 50 Ohms Nominal
- Maximum Input Power: 400 mW Max, Derated to 85°C @ 3.2 mW/°C
- X Port Current: 50 mA Max.
- MIL-STD-883 Screening Available
Description
Transformers convert the LO and RF paths to balanced lines connecting to a medium barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. SF-1 Pin Configuration Pin No. Function Pin No. Function
1 GND 3 LO
2 IF 4 RF
Electrical Specifications 1: T A = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Frequency Range RF, LO Ports IF Port 0.2 - 200 DC - 200 MHz MHz — — — Conversion Loss 0.2 - 50 MHz 50 - 200 MHz dB dB 6.0 7.5 LO to RF 0.2 - 50 MHz 50 - 200 MHz dB dB LO to IF 0.2 - 50 MHz 50 - 200 MHz dB dB RF to IF 0.2 - 50 MHz 50 - 200 MHz dB dB DC Polarity Negative — — — — — RF Input 2 1 dB Compression 1 dB Desensitization dBm dBm SSB Noise Figure Within 1 dB of Conversion Loss Max Typical Two-Tone IM Ratio with a –10 dBm input, each input,
25 MHz and 35 MHz IF
- All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance. 2. Measured at 100 MHz.
Surface Mount Double-Balanced Mixer,
200 KHz - 200 MHz
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Typical Performance Curves
Ordering Information
.506 4X .016 ± .002 4X .099 ± .010 .381 .000 .002 .165 .220 .385 Ref .000 .002 .080 .143 .205 .305 .367 .430 .510 Ref