DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Features
Frequency: 2300–4200 MHz 3.3 V supply P1dB: 25 dBm across the frequency band Power consumption: 330 mW Fully matched (50 ohm input/output, DC blocked) Compact 2.2 mm 2.2 mm LGA package Figure 1. Functional Block Diagram improvements in the design of its products.
Figure 2. Pin Connections Table 1. Functional Pin Description
2 RFin RF Input
6 EN Bias Enable/Disable
9 RFout RF Output
11 VCC Supply Voltage
Table 2. Maximum Ratings Table 3. ESD Protection Characteristics Table 4. Moisture Sensitivity Level Table 5. Electrical Characteristics(VCC = 3.3 Vdc, 3500 MHz, TA =2 5C, 50 ohm system, in NXP Application Circuit) Table 6. Ordering Information
Figure 3. A3M40PD012 Application Circuit Component Layout Table 7. A3M40PD012 Application Circuit Component Designations and Values
Figure 4. Product Marking
6/1 3Data Sheet: Technical Data A3M40PD012 Airfast Pre- -driver Module, Rev. 0, April 2021
Package Information
7/1 3Data Sheet: Technical Data A3M40PD012 Airfast Pre- -driver Module, Rev. 0, April 2021
8/1 3Data Sheet: Technical Data A3M40PD012 Airfast Pre- -driver Module, Rev. 0, April 2021
9/1 3Data Sheet: Technical Data A3M40PD012 Airfast Pre- -driver Module, Rev. 0, April 2021
10 / 13Data Sheet: Technical Data A3M40PD012 Airfast Pre- -driver Module, Rev. 0, April 2021
11 / 13Data Sheet: Technical Data A3M40PD012 Airfast Pre- -driver Module, Rev. 0, April 2021
12 / 13Data Sheet: Technical Data A3M40PD012 Airfast Pre- -driver Module, Rev. 0, April 2021 Product Tools Refer to the following resource to aid your design process. Development Tools Printed Circuit Boards Failure Analysis At this time, because of the physical characteristics of the part, failure analysis is limited to electrical signature analysis. In cases where NXP is contractually obligated to perform failure analysis (FA) services, full FA may be performed by third party vendors with moderate success. For updates contact your local NXP Sales Office.
Revision History
The following table summarizes revisions to this document. Revision Date Description 0 Apr. 2021 Initial release of data sheet
13 / 13Data Sheet: Technical Data A3M40PD012 Airfast Pre- -driver Module, Rev. 0, April 2021 Information in this document is provided solely to enablesystem and software implementers to use NXP products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. NXP reserves the right to make changes without further notice to any products herein. NXP makes no warranty, representation, orguarantee regarding the suitability of its products for any particularpurpose, nor does NXP assume any liability arising out of the application or use of any product or circuit, andspecifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in NXP data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. NXP does not convey any license under its patent rights nor the rights of others. NXP sells products pursuant to standard terms and conditions of sale, which can be found at the following address:nxp.com/ SalesTermsandConditions. NXP, the NXP logo and Airfast are trademarks of NXP B.V. All other product or service names are the property of their respective owners. How to Reach Us Home Page: nxp.com Web Support: nxp.com/support E NXP B.V. 2021 All rights reserved. For more information, please visit:http://www.nxp.com For sales office addresses, please send an email to:salesaddresses@nxp.com Date of release: April 2021 Document identifier: A3M40PD012