DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Series M2100 LED Tipped Toggles www.nkk.comA76 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 6A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold Insulation Resistance: 1,000 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 50,000 operations minimum Electrical Life: 25,000 operations minimum Nominal Operating Force: On-to-On Position Off-to-On Position Single Pole 3.19N 3.92N Double Pole 4.41N 7.06N Angle of Throw: 20° Materials & Finishes Bushing: Brass with nickel plating Housing: Stainless steel Mounting Bracket: Steel with tin plating Movable Contacts: Silver alloy or silver alloy with gold plating Stationary Contacts: Silver with silver plating or copper or brass with gold plating Lamp Contacts: Phosphor bronze Base: Diallyl phthalate (UL94V-0) Switch Terminals: Copper with silver or gold plating Lamp Terminals: Brass with silver or gold plating Environmental Data Operating Temp Range: –10°C through +55°C (+14°F through +131°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting Torque: 1.47Nm (13 lb•in) for double nut; .67Nm (6 lb•in) for single nut Soldering Time & Temp: Wave Soldering (PC version): See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Note: Lever must be in center position while soldering. Cleaning: PC mountable device is not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-0 base UL: File No. E44145 Single pole with synchronous circuits & solder lug or PC recognized at 6A @ 125V AC Add “/U” to end of part number to order UL mark on switch. CSA: File No. 023535_0_000 All single pole with synchronous circuits certified at 6A @ 125V AC Add “/C” to end of part number to order CSA mark on switch.
Series M2100LED Tipped Toggles www.nkk.com A77 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt Distinctive Characteristics Industry’s first LED illumination at tip of toggle switches. Single color LEDs of red, yellow, and green, plus bicolor red/green, to meet varied design requirements. LEDs can operate independently from or synchronously with switching operation. Antijamming feature to protect contacts from damage due to excessive downward force on the toggle. High torque bushing prevents the bushing from rotating or separating from the metal frame during installation. Stainless steel frame resists corrosion. Silver contacts are of specially composed alloy for hardness. High insulating barriers protect against crossover in double pole devices. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants. 1,500V dielectric strength between switch contacts and case is accomplished by clinching the frame away from the terminals. Actual Size
Series M2100 LED Tipped Toggles www.nkk.comA78 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles TYPICAL SWITCH ORDERING EXAMPLE
1 TM21
2 ON NONE ON
3 ON OFF ON
& Ratings W Silver; Rated 6A @ 125V AC G Gold; Rated 0.4VA max @ 28V AC/DC max DESCRIPTION FOR TYPICAL ORDERING EXAMPLE M2112TCW01 W LED Colors Single Color C Red E Yellow F Green Bicolor CF Red/Green Terminals & Mounting Types
01 Solder Lug with Threaded Bushing*
02 Quick Connect with Threaded Bushing
03 Straight PC with Threaded Bushing
30 Right Angle PC with Smooth Bushing
(available with gold contacts only) Poles
1 SPDT
- 2 DPDT * Available only with Terminals 01, 02, 03 Silver Contacts with 6-Amp Rating Solder Lug Terminals Red LED C 01 LED Circuits & Actuator Types L Isolated T Synchronous IMPORTANT: Switches are supplied without UL & CSA marking unless specified. Specific models & ratings noted on General Specifications page. * Wire harness & cable assemblies offered only in Americas 1/4–40 Threaded Bushing Threaded Bushings No Code 1/4–40 Thread (Inch) /M 6mm Thread (Metric)
Series M2100LED Tipped Toggles www.nkk.com A79 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt Model Pole & Throw Toggle Position & Terminal Numbers Schematics Down Center Up Notes: Terminal numbers are not actually on the switch. LEDs require an external power source. M2112 SPDT ON 2-3 NONE NONE ON 2-1 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 4-6 ON 4-6 Red 5-6 NONE NONE NONE NONE NONE NONE ON 4-6 OFF OPEN Green 5-4 M2113 SPDT ON 2-3 OFF OPEN ON 2-1 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 4-6 ON 4-6 Red 5-6 ON 4-6 OFF OPEN OFF OPEN ON 4-6 ON 4-6 Green 5-4 M2122 DPDT ON 2-3 5-6 NONE NONE ON 2-1 5-4 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 7-9 ON 7-9 Red 8-9 NONE NONE NONE NONE NONE NONE ON 7-9 OFF OPEN Green 8-7 M2123 DPDT ON 2-3 5-6 OFF OPEN ON 2-1 5-4 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 7-9 ON 7-9 Red 8-9 ON 7-9 OFF OPEN OFF OPEN ON 7-9 ON 7-9 Green 8-7 POLES & CIRCUITS & LED ILLUMINATION Isolated Single Color LED Isolated Bicolor LED Synchronous Single Color LED Synchronous Bicolor LED
134 COM 6
2 (COM) (+) Red ( ) Green Red Green 134 6 2 (COM) L(+) L(-) COM (+)134 6 2 (COM) Green Red External Connection Connected Power TerminalsLED Circuit Connected Power Terminals 16 79 2 (COM) L(+) L(-) Connected Power TerminalsLED CircuitLED Circuit Connected Power TerminalsLED Circuit 137 9 2 (COM) L(+) L(-) COM (+)134 9 2 (COM) 5 67 8 Green Red External Connection 134 2 (COM) 5
67 COM 9
(+) Red ( ) Green Red Green Isolated Single Color LED Isolated Bicolor LED Synchronous Single Color LED Synchronous Bicolor LED Keyway LED COLORS & SPECIFICATIONS Single Element LED Single Color Bicolor Red Yellow Green Red/Green Forward Peak Current IFM 25 30 30 25 Continuous Forward Current IF 20 20 20 10 Forward Voltage VF 2.1 2.1 2.1 1.9 Reverse Peak Voltage VRM 4 4 4 ––– Ambient Temperature Range –10° ~ +55°C LED factory assembled Not available separately Bicolor LED is translucent white when unlit. CFC FE Color 134 6 2 (COM) L(+) L(-)
Series M2100 LED Tipped Toggles www.nkk.comA80 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles LED CIRCUIT, TOGGLE, & MOUNTING TYPE COMBINATIONS Toggle with Isolated LED CircuitL Toggle with Synchronous LED CircuitT M2112TCFW01 Single color LED switch does not have terminal 5. Solder Lug Single Pole Threaded Bushing combines with Terminal codes 01, 02, & 03. Smooth Bushing combines with Terminal code 30. Max. Panel Thickness without Locking Ring .134” (3.4mm) TYPICAL SWITCH DIMENSIONS Solder Lug Double Pole Right Angle PC Single Pole Only M2122TCFW01 Single color LED switch does not have terminal 8. M2112TCFG30 Single color LED switch does not have terminal 5. Gold contact material only Finish: Brushed aluminum Standard Hardware: 2 AT513H Hex Nuts, 1 AT507H Locking Ring, 1 AT509 Lockwasher Standard & optional hardware details in Accessories & Hardware section. Max. Panel Thickness with Standard Hardware .102” (2.6mm) (6.5) Dia .256 (5.6) .220 (0.6) .024 (6.5) Dia .256 (6.5) .256 (2.2) Dia .087 (12.7) .500 Keyway (2.5) Dia .098 (5.0) Dia .197 20° 1/4-40 Thd (4.8) .189 (0.8) Typ .031 (4.7) Typ .185 (6.35) .250 (0.9) .035 (8.0) .315 (20.3) .799 (14.7) .579 (13.0) .512 (1.17) Typ .046 (2.0) Typ .079 (4.8) .189 Keyway (2.5) Dia .098 (5.0) Dia .197 (17.5) .689 (6.35) .250 20° 1/4-40 Thd (4.8) .189 (0.8) Typ .031 (4.7) Typ .185 (6.35) .250 (0.9) .035 (8.0) .315 (20.3) .799 (14.7) .579 (13.0) .512 96 3 (1.17) Typ .046 (2.0) Typ .079 (4.8) Typ .189 Keyway (2.5) Dia .098 (5.0) Dia .197 (2.9) .114 (1.4) .055 (5.1) .201 (13.0) .512 (6.2) Dia .244 (14.7) .579 (16.4) .646 (3.81) .150 (7.6) .299 (1.27) Typ .050 (0.4) .016 (1.1) .043 (0.8) Typ .031 (4.7) Typ .185 (4.3) .169 (12.7) .500 12 3 45 6 (6.2) Dia .244 (14.7) .579 (5.0) Dia .197 20° 1/4-40 Thd (14.7) .579 (5.0) Dia .197 20°
Series M2100LED Tipped Toggles www.nkk.com A81 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt W Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC G CONTACT MATERIALS & RATINGS Complete explanation of operating range in Supplement section. TERMINALS Solder Lug with Turret LED Terminal01 Straight PC with Turret LED Terminal Right Angle PC30 Optional Hardware: Knurled nuts, dress nuts, and ON-OFF plates are available; see details in Accessories & Hardware section. Single Pole Double Pole Quick Connect02 Single color LED & isolated bicolor LED switches do not have terminal 5. STANDARD MOUNTING HARDWARE AT513H Hexagon Nuts (2 per switch) Material: Brass with nickel plating AT507H Locking Ring (1 per switch) Material: Steel with chromate over zinc AT509 Lockwasher (1 per switch) Material: Steel with chromate over zinc Epoxy Seal (6.35) .250 (4.8) .189 (4.8) .189 (1.17) .046 (4.0) .157 (2.0) .079 (1.1) .043 (2.0) .079 Thk = (0.8) Typ .031 Epoxy Seal(6.35) .250 (4.8) .189 (4.8) .189 Thk = (0.8) Typ .031 (1.17) Typ .046 Epoxy Seal(6.35) .250 (4.8) .189 (4.8) .189 Thk = (0.8) Typ .031 (1.57) Typ .062 (4.7) Typ .185 (4.8) .189 (1.8) Dia Typ .073 3 6 (4.8) Typ .189 (4.7) Typ .185 (1.8) Dia Typ .073 3 6 (3.81) .150 (4.7) Typ .185 (1.8) Dia Typ .073 123 (16.4) .646 (2.54) Typ .100 456 (9.0) .354 (1.5) .059 (8.0) .315 1/4-40 Thd (2.0) .079 (5.5) or .229 (6.35) Dia .250 (12.0) Dia .472 (1.7) .067 (0.8) .031 (0.5) .020 (6.4) Dia .252 (10.2) Dia .402 Single Pole Single color LED & isolated bicolor LED switches do not have terminal 8. Single color LED & isolated bicolor LED switches do not have terminal 5.
Series M2100 LED Tipped Rockers & Paddles www.nkk.comB92 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 6A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold Insulation Resistance: 1,000 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 50,000 operations minimum Electrical Life: 25,000 operations minimum Nominal Operating Force: On-to-On Position Off-to-On Position Paddles Single Pole 3.19N 3.92N Double Pole 4.41N 7.06N Rockers Single Pole 6.37N 9.80N Double Pole 13.73N 17.65N Angle of Throw: 20° Materials & Finishes Housing: Stainless steel Mounting Bracket: Steel with tin plating Movable Contacts: Silver alloy or silver alloy with gold plating Stationary Contacts: Silver with silver plating or copper or brass with gold plating Lamp Contacts: Phosphor bronze Base: Diallyl phthalate (UL94V-0) Switch Terminals: Copper with silver or gold plating Lamp Terminals: Brass with silver or gold plating Environmental Data Operating Temp Range: –10°C through +55°C (+14°F through +131°F) for rockers –25°C through +70°C (–13°F through +158°F) for paddles Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Soldering Time & Temp: Wave Soldering (PC version): See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Note: Lever must be in center position while soldering. Cleaning: PC mountable device is not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-0 base UL: File No. E44145 Single pole rockers with synchronous circuits & solder lug or PC recognized at 6A @ 125V AC. Add “/U” to end of part number to order UL mark on switch. CSA: File No. 023535_0_000 All single pole rockers with synchronous circuits certified at 6A @ 125V AC. Add “/C” to end of part number to order CSA mark on switch.
Series M2100LED Tipped Rockers & Paddles www.nkk.com B93 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt TYPICAL SWITCH ORDERING EXAMPLE
1 NM21
& Ratings W Silver; Rated 6A @ 125V AC G Gold; Rated 0.4VA max @ 28V AC/DC max DESCRIPTION FOR TYPICAL ORDERING EXAMPLE M2112NCFW01 W LED Colors Single Color C Red E Yellow F Green Bicolor CF Red/Green Poles
- 2 DPDT * Available only with Rockers with Terminals 01, 02, 03 Silver Contacts with 6-Amp Rating Solder Lug Terminals Optional Bezel & Colors For Snap-in Frame A Black B White C Red E Yellow F Green G Blue H Gray Red/Green LED CF 01 Paddle P Isolated J Synchronous Rocker R Isolated N Synchronous LED Circuits & Actuator Types
01 Solder Lug with Flat Frame*
02 Quick Connect with Flat Frame
03 Straight PC with Flat Frame
13 Straight PC with Bracket Mount
Terminals & Mounting Types
01 Solder Lug with Snap-in Frame*
02 Quick Connect with Snap-in Frame
03 Straight PC with Snap-in Frame
IMPORTANT: Switches are supplied without UL & CSA marking unless specified. Specific models & ratings noted on General Specifications page. * Wire harness & cable assemblies offered only in Americas
Series M2100 LED Tipped Rockers & Paddles www.nkk.comB94 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles LED COLORS & SPECIFICATIONS Single Element LED Rockers Paddles Single Color Bicolor Single Color Bicolor UnitsRed Yellow Green Red/Green Red Yellow Green Red/Green Forward Peak Current IFM 25 30 30 25 10 30 30 30/25 mA Continuous Forward Current IF 20 20 20 20 8 24 24 20/20 mA Reverse Peak Voltage VRM 4 4 4 ––– 5 5 5 ––– V Ambient Temperature Range –10° ~ +55°C –25° ~ +70°C LED factory assembled Not available separately Bicolor LED is translucent white when unlit. CFCFC FE C E F Color Model Pole & Throw Toggle Position & Terminal Numbers Schematics Down Center Up Notes: Terminal numbers are not actually on the switch. LEDs require an external power source. M2112 SPDT ON 2-3 NONE NONE ON 2-1 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 4-6 ON 4-6 Red 5-6 NONE NONE NONE NONE NONE NONE ON 4-6 OFF OPEN Green 5-4 M2113 SPDT ON 2-3 OFF OPEN ON 2-1 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 4-6 ON 4-6 Red 5-6 ON 4-6 OFF OPEN OFF OPEN ON 4-6 ON 4-6 Green 5-4 M2122 DPDT ON 2-3 5-6 NONE NONE ON 2-1 5-4 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 7-9 ON 7-9 Red 8-9 NONE NONE NONE NONE NONE NONE ON 7-9 OFF OPEN Green 8-7 M2123 DPDT ON 2-3 5-6 OFF OPEN ON 2-1 5-4 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 7-9 ON 7-9 Red 8-9 ON 7-9 OFF OPEN OFF OPEN ON 7-9 ON 7-9 Green 8-7 POLES & CIRCUITS & LED ILLUMINATION Isolated Single Color LED Isolated Bicolor LED Synchronous Single Color LED Synchronous Bicolor LED COM (+)134 6 2 (COM) Green Red External Connection Connected Power TerminalsLED Circuit Connected Power Terminals Connected Power TerminalsLED CircuitLED Circuit Connected Power TerminalsLED Circuit COM (+)134 9 2 (COM) 5 67 8 Green Red External Connection Isolated Single Color LED Isolated Bicolor LED Synchronous Single Color LED Synchronous Bicolor LED 2 (COM) (+) Red ( ) Green Red Green 134 6 2 (COM) L(+) L(-) 16 79 2 (COM) L(+) L(-) 137 9 2 (COM) L(+) L(-) 134 2 (COM) 5 (+) Red ( ) Green Red Green 134 6 2 (COM) L(+) L(-)
Series M2100LED Tipped Rockers & Paddles www.nkk.com B95 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt (6.35) .250 (4.8) .189 (4.7) Typ .185 (0.8) Typ .031 (12.0) .472 (0.6) .024 20° (3.5) .138 (9.8) .386 (20.3) .799 (12.0) .472 20° (3.5) .138 (9.8) .386 (0.6) .024 (16.8) .661 (13.5) .531 LED CIRCUIT, ROCKER, & MOUNTING TYPE COMBINATIONS TYPICAL ROCKER SWITCH DIMENSIONS Rocker with Isolated LED CircuitR Rocker with Synchronous LED CircuitN Flat Frame combines with Terminal codes 01, 02, & 03. Bracket combines with Terminal code 13. Maximum Panel Thickness .126” (3.2mm) Material: Polyamide Finish: Matte Color: Black (17.8) .701 (23.8) .937 (2.6) Dia Typ .102(10.1) .398 (12.0) .472 20° (9.8) .386 (16.8) .661 (13.5) .531 (3.5) .138 (9.3) .366 (6.9) .272 (29.5) 1.161 (23.8) .937 (2.4) Dia Typ .094 (2.5) Dia .098 (6.35) .250 (4.8) .189 (4.7) Typ .185 (0.8) Typ .031 (12.0) .472 (0.6) .024 20° (3.5) .138 (9.8) .386 (20.3) .799 (13.0) .512 (1.17) Typ .046 (2.0) Typ .079(4.8) .189 (12.7) .500 (9.3) .366 (2.5) Dia .098 (6.35) .250 (4.5) .177 (4.7) Typ .185 (0.8) Typ .031 (12.0) .47220° (3.5) .138 (9.8) .386 (20.3) .799 (15.8) .622 (0.5) Typ .020 (9.0) .354 (3.2) Typ .126 (13.0) .512 (1.17) Typ .046 (1.17) Typ .046 (4.8) .189 (12.7) .500 (9.3) .366 (6.9) .272 (29.5) 1.161 (23.8) .937 (2.4) Dia Typ .094 (2.5) Dia .098 (6.35) .250 (13.0) .512 96 3 (1.17) Typ .046 (2.0) Typ .079 (4.8) Typ .189 (17.5) .689 (10.1) .398 (17.8) .701 Direction of Actuation Single Pole Solder Lug Double Pole Solder Lug Single Pole Only Straight PC • Bracket Single color LED switch does not have terminal 5. M2112NCFW01 Single color LED switch does not have terminal 8. M2122NCFW01 Single color LED switch does not have terminal 5. Silver contact material is standard. M2112NCFW13
Series M2100 LED Tipped Rockers & Paddles www.nkk.comB96 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles 20° (3.2) .126 (2.8) .110 (7.1) .280 (13.7) .539 (0.5) .020 (5.9) R .232 (4.5) .177 TYPICAL PADDLE SWITCH DIMENSIONS Solder Lug • Snap-in Single Pole Only M2112JCFW01 Single color LED switch does not have terminal 5. Straight PC • Bracket Single Pole Only M2112JCFW13 Silver contact material is standard. Single color LED switch does not have terminal 5. LED CIRCUIT, PADDLE, & MOUNTING TYPE COMBINATIONS Paddle with Isolated LED CircuitP Paddle with Synchronous LED CircuitJ Snap-in combines with Terminal codes 01, 02, & 03 Bracket combines with Terminal code 13 Maximum Panel Thickness .126” (3.2mm) Material: Polyamide Finish: Matte Color: Black Maximum Panel Thickness without Bezel with Bezel (12.7) .500 (12.4) .490 (13.1) .516 (15.9) .626 (18.0) .709 (2.0) .079 (5.0) .197 (11.5) .453 (12.2) .480 20° (3.2) .126 (2.8) .110 (7.1) .280 (13.7) .539 (26.5) 1.043 (6.35) .250 (4.8) .189 (4.7) Typ .185 (0.8) Typ .031 (0.5) .020 (13.0) .512 (2.0) Typ .079 (1.17) Typ .046 (4.8) .189 (12.7) .500 (2.0) .079 (5.0) .197 (9.0) .354 (11.5) .453 (6.35) .250 (4.5) .177 (4.7) Typ .185 (0.8) Typ .031 (3.5) .138 (20.2) .795 (15.8) .622 (0.5) Typ .020 20° (3.2) .126 (20.1) .791 (9.0) .354 (3.2) Typ .126 (13.0) .512 (1.17) Typ .046 (1.17) Typ .046 (4.8) .189 (12.7) .500 20° (3.2) .126 (3.5) .138 (20.1) .791 (5.9) R .232 (4.5) .177
Series M2100LED Tipped Rockers & Paddles www.nkk.com B97 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt AT2107 Bezel for Snap-in Panel Frame Material: Polyamide Finish: Matte Colors Available: A Black OPTIONAL BEZEL & COLORS (11.8) .465 (21.5) .846 (12.0) .472(15.6) .614 (2.2) .087 (13.1) .516 (15.9) .626 B White C Red E Yellow F Green G Blue H Gray W Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC G CONTACT MATERIALS & RATINGS Complete explanation of operating range in Supplement section. TERMINALS Solder Lug with Turret LED Terminal01 Straight PC with Turret LED Terminal Straight PC with Bracket & Turret LED Terminal13 Single Pole Double Pole Quick Connect02 Single color LED & isolated bicolor LED switches do not have terminal 5. Epoxy Seal (6.35) .250 (4.8) .189 (4.8) .189 (1.17) .046 (4.0) .157 (2.0) .079 (1.1) .043 (2.0) .079 Thk = (0.8) Typ .031 Epoxy Seal(6.35) .250 (4.8) .189 (4.8) .189 Thk = (0.8) Typ .031 (1.17) Typ .046 Epoxy Seal(6.35) .250 (4.8) .189 (4.8) .189 Thk = (0.8) Typ .031 (1.57) Typ .062 (4.7) Typ .185 (4.8) .189 (1.8) Dia Typ .073 3 6 (4.8) Typ .189 (4.7) Typ .185 (1.8) Dia Typ .073 3 6 (1.6) Typ .063 (2.4) Typ .095 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059CL Single color LED & isolated bicolor LED switches do not have terminal 8. Single color LED & isolated bicolor LED switches do not have terminal 5. Single Pole