M2112LCW01_17 NKK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Series M2100 LED Tipped Toggles A80 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles www.nkkswitches.com General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 6A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold Insulation Resistance: 1,000 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 50,000 operations minimum Electrical Life: 25,000 operations minimum Nominal Operating Force: On-to-On Position Of f-to-On Position Single Pole 3.19N 3.92N Double Pole 4.41N 7.06N Angle of Throw: 20° Materials & Finishes Bushing: Brass with nickel plating Housing: Stainless steel Mounting Bracket: Steel with tin plating Movable Contacts: Silver alloy or silver alloy with gold plating Stationar y Contacts: Silver with silver plating or copper or brass with gold plating Lamp Contacts: Phosphor bronze Base: Diallyl phthalate (UL94V-0) Switch Terminals: Copper with silver or gold plating Lamp T erminals: Brass with silver or gold plating Environmental Data Operating T emp Range: –10°C through +55°C (+14°F through +131°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting Torque: 1.47Nm (13 lb•in) for double nut; .67Nm (6 lb•in) for single nut Soldering Time & Temp: Wave Soldering (PC version): See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Note: Lever must be in center position while soldering. Cleaning: PC mountable device is not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-0 base UL: File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” to end of par t number to order UL recognized switch. Single pole with synchronous circuits & single color LEDs & solder lug or PC recognized at 6A @ 125V AC. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” to end of par t number to order CSA certified switch. All single pole with synchronous circuits & single color LEDs cer tified at 6A @ 125V AC. 3/13/17
Series M2100LED Tipped Toggles A81 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt www.nkkswitches.com Distinctive Characteristics Industry’s first LED illumination at tip of toggle switches. Single color LEDs of red, yellow, and green, plus bicolor red/green, to meet varied design requirements. LEDs can operate independently from or synchronously with switching operation. Antijamming feature to protect contacts from damage due to excessive downward force on the toggle. High torque bushing prevents the bushing from rotating or separating from the metal frame during installation. Stainless steel frame resists corrosion. Silver contacts are of specially composed alloy for hardness. High insulating barriers protect against crossover in double pole devices. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants. 1,500V dielectric strength between switch contacts and case is accomplished by clinching the frame away from the terminals. Actual Size
Series M2100 LED Tipped Toggles A82 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles www.nkkswitches.com TYPICAL SWITCH ORDERING EXAMPLE
1 TM21
2 ON NONE ON
3 ON OFF ON
& Ratings W Silver; Rated 6A @ 125V AC G Gold; Rated 0.4VA max @ 28V AC/DC max DESCRIPTION FOR TYPICAL ORDERING EXAMPLE M2112TCW01 W LED Colors Single Color C Red E Yellow F Green Bicolor CF Red/Green Terminals & Mounting Types
01 Solder Lug with Threaded Bushing
02 Quick Connect with Threaded Bushing
03 Straight PC with Threaded Bushing
30 Right Angle PC with Smooth Bushing
(available with gold contacts only) Poles
1 SPDT
- 2 DPDT * Available only with Terminals 01, 02, 03 Silver Contacts with 6-Amp Rating Solder Lug Terminals Red LED C 01 LED Circuits & Actuator Types L Isolated T Synchronous 1/4–40 Threaded Bushing Threaded Bushings No Code 1/4–40 Thread (Inch) /M 6mm Thread (Metric) IMPORTANT: Switches are supplied without UL & CSA marking unless specified. UL & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page.
Series M2100LED Tipped Toggles A83 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt www.nkkswitches.com POLES & CIRCUITS & LED ILLUMINATION Model Pole & Throw Toggle Position & Terminal Numbers Schematics Down Center Up Notes: Terminal numbers are not actually on the switch. LEDs require an external power source. M2112 SPDT ON 2-3 NONE NONE ON 2-1 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 4-6 ON 4-6 Red 5-6 NONE NONE NONE NONE NONE NONE ON 4-6 OFF OPEN Green 5-4 M2113 SPDT ON 2-3 OFF OPEN ON 2-1 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 4-6 ON 4-6 Red 5-6 ON 4-6 OFF OPEN OFF OPEN ON 4-6 ON 4-6 Green 5-4 M2122 DPDT ON 2-3 5-6 NONE NONE ON 2-1 5-4 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 7-9 ON 7-9 Red 8-9 NONE NONE NONE NONE NONE NONE ON 7-9 OFF OPEN Green 8-7 M2123 DPDT ON 2-3 5-6 OFF OPEN ON 2-1 5-4 Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals ON 7-9 ON 7-9 Red 8-9 ON 7-9 OFF OPEN OFF OPEN ON 7-9 ON 7-9 Green 8-7 Isolated Single Color LED Isolated Bicolor LED Synchronous Single Color LED Synchronous Bicolor LED 134 6 2 (COM) L(+) L(-) COM (+)134 6 2 (COM) Green Red External Connection Connected Power Terminals 16 79 2 (COM) L(+) L(-) LED Circuit 137 9 2 (COM) L(+) L(-) COM (+)134 9 2 (COM) 5 67 8 Green Red External Connection Isolated Single Color LED Isolated Bicolor LED Synchronous Single Color LED Synchronous Bicolor LED Keyway 134 6 2 (COM) L(+) L(-) Connected Power Terminals Connected Power Terminals Connected Power Terminals LED Circuit LED Circuit LED Circuit
136 COM 4
2 (COM) (+) Red ( ) Green Red Green 134 2 (COM) 5
69 COM 7
(+) Red ( ) Green Red Green
Series M2100 LED Tipped Toggles A84 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles www.nkkswitches.com LED CIRCUIT, TOGGLE, & MOUNTING TYPE COMBINATIONS Toggle with Isolated LED CircuitL Toggle with Synchronous LED CircuitT M2112TCFW01 Single color LED switch does not have terminal 5. Solder Lug Single Pole Threaded Bushing combines with Terminal codes 01, 02, & 03. Smooth Bushing combines with Terminal code 30. Max. Panel Thickness without Locking Ring .134” (3.4mm) TYPICAL SWITCH DIMENSIONS Finish: Brushed aluminum Standard Hardware: 2 AT513H Hex Nuts, 1 AT507H Locking Ring,
1 AT509 Lockwasher Standard &
optional hardware details in Accessories & Hardware section. Max. Panel Thickness with Standard Hardware .102” (2.6mm) (12.7) .500 Keyway (2.5) Dia .098 (5.0) Dia .197 20° 1/4-40 Thd (4.8) .189 (0.8) Typ .031 (4.7) Typ .185 (6.35) .250 (0.9) .035 (8.0) .315 (20.3) .799 (14.7) .579 (13.0) .512 (1.17) Typ .046 (2.0) Typ .079 (4.8) .189 (6.2) Dia .244 (14.7) .579 (5.0) Dia .197 20° 1/4-40 Thd (14.7) .579 (5.0) Dia .197 20° Single Color Bicolor Red Yellow Green Red/Green Units Maximum Forward Current IFM 30 30 30 25 mA Typical Forward Current IF 20 20 20 10 mA Maximum Reverse Voltage VRM 4 4 4 ––– V Ambient Temperature Range –10° ~ +55°C LED COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated and requires an external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in Supplement Section. CFC FE Color The LED is an integral part of the switch and not available separately. Bicolor LED is translucent white when unlit. (6.5) Dia .256 (6.1) .240 (2.2) Dia .087 (6.5) Dia .256 (5.8) .228 (0.6) .024
Series M2100LED Tipped Toggles A85 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt www.nkkswitches.com W Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC G CONTACT MATERIALS & RATINGS Complete explanation of operating range in Supplement section. TYPICAL SWITCH DIMENSIONS Double Pole Solder Lug Single Pole Only Right Angle PC Single color LED switch does not have terminal 8. M2122TCFW01 Single color LED switch does not have terminal 5. Gold contact material only M2112TCFG30 Keyway (2.5) Dia .098 (5.0) Dia .197 (17.5) .689 (6.35) .250 20° 1/4-40 Thd (4.8) .189 (0.8) Ty p .031 (4.7) Typ .185 (6.35) .250 (0.9) .035 (8.0) .315 (20.3) .799 (14.7) .579 (13.0) .512 96 3 (1.17) Typ .046 (2.0) Typ .079 (4.8) Typ .189 Keyway (2.5) Dia .098 (5.0) Dia .197 (2.9) .114 (1.4) .055 (5.1) .201 (13.0) .512 (6.2) Dia .244 (14.7) .579 (16.4) .646 (3.81) .150 (7.6) .299 (1.27) Typ .050 (0.4) .016 (1.1) .043 (0.8) Typ .031 (4.7) Typ .185 (4.3) .169 (12.7) .500 12 3 45 6
Series M2100 LED Tipped Toggles A86 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles www.nkkswitches.com TERMINALS Solder Lug with Turret LED Terminal01 Straight PC with Turret LED Terminal03 Right Angle PC30 Optional Hardware: Knurled nuts, dress nuts, and ON-OFF plates are available; see details in Accessories & Hardware section. Single Pole Double Pole Quick Connect02 Single color LED & isolated bicolor LED switches do not have terminal 5. STANDARD MOUNTING HARDWARE AT513H Hexagon Nut (2 per switch) Material: Brass with nickel plating AT507H Locking Ring (1 per switch) Material: Steel with chromate over zinc AT509 Lockwasher (1 per switch) Material: Steel with chromate over zinc Epoxy Seal (6.35) .250 (4.8) .189 (4.8) .189 (1.17) .046 (4.0) .157 (2.0) .079 (1.1) .043 (2.0) .079 Thk = (0.8) Typ .031 Epoxy Seal(6.35) .250 (4.8) .189 (4.8) .189 Thk = (0.8) Typ .031 (1.17) Typ .046 Epoxy Seal(6.35) .250 (4.8) .189 (4.8) .189 Thk = (0.8) Typ .031 (1.57) Typ .062 (4.7) Typ .185 (4.8) .189 (1.8) Dia Typ .073 3 6 (4.8) Typ .189 (4.7) Typ .185 (1.8) Dia Typ .073 3 6 (3.81) .150 (4.7) Typ .185 (1.8) Dia Typ .073 123 (16.4) .646 (2.54) Typ .100 456 (9.0) .354 (1.5) .059 (8.0) .315 1/4-40 Thd (1.7) .067 (0.8) .031 (0.5) .020 (6.4) Dia .252 (10.2) Dia .402 Single Pole Single color LED & isolated bicolor LED switches do not have terminal 8. Single color LED & isolated bicolor LED switches do not have terminal 5. LED terminals only available in brass with silver plating (2.0) .079 (5.8) .229 (6.35) Dia .250 (12.0) Dia .472