M2100 UTC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
UTC M2100 LINEAR INTEGRATED CIRCUIT UTC UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R105-011,B SINGLE OPERATIONAL AMPLIFIER
DESCRIPTION
The UTC M2100 is a low supply voltage and low saturation output voltage (+-2.0V p-p at supply voltage +-2.5V) operational amplifier. It is applicable to handy type CD, radio cassette CD, and portable DAT, that are digital audio apparatus which require the 5V single supply operation and high output voltage.
FEATURES
*Single Supply Operation *Operating Voltage (+-1.0V~+-3.5V) *Low Saturation Output Voltage *High Slew Rate (4V/ µs typ.) *Package Outline *Bipolar Technology DIP-8 SOP-8 TSSOP-8 PIN CONFIGURATION A OUTPUT A -INPUT A +INPUT B OUTPUT B -INPUT B +INPUT A - + B + -
UTC M2100 LINEAR INTEGRATED CIRCUIT UTC UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R105-011,B BLOCK DIAGRAM ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL VALUE UNIT Supply Voltage V+/V- +-3.5 V Differential Input Voltage V ID +-7 V Power Dissipation P D 500 (DIP8) 300 (SOP8) 250 (TSSOP8) mW Operating Temperature Range Topr -20~+75 °C Storage Temperature Range Tstg -40~+125 °C ELECTRICAL CHARACTERISTICS (Ta=25°C) (V+=5V, Ta=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP. MAX UNIT Input Offset Voltage V IO Rs<=10kΩ 1 6 mV Input Bias Current I IB 100 300 nA Large Signal Voltage Gain Av RL>=10kΩ 60 80 dB Maximum Output Voltage Swing V OM RL>=2.5kΩ +-2 +-2.2 V Input Common Mode Voltage Range V ICM +-1.5 V Common Mode Rejection Ratio CMR 60 74 dB Supply Voltage Rejection Ratio SVR 60 80 dB Operating Current Icc VIN=0,RL=∞ 3.5 5 mA Slew Rate SR Av=1,V IN=+-1V 4 V/µS Gain-Bandwidth product GB f=10kHz 12 MHz NOTE1: Applied circuit voltage gain is desired to be operated within the range of 3 dB to 30dB. NOTE2: Special care being required for input common mode voltage range and the oscillation due to the capacitive load when operating on voltage follower. NOTE3: Special care being required for the oscillation, yet having the gain when the supply voltage is applied at more than 5V (single supply voltage 5V)
UTC M2100 LINEAR INTEGRATED CIRCUIT UTC UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R105-011,B TYPICAL CHARACTERISTICS
UTC M2100 LINEAR INTEGRATED CIRCUIT UTC UNISONIC TECHNOLOGIES CO., LTD. 4 QW-R105-011,B
UTC M2100 LINEAR INTEGRATED CIRCUIT UTC UNISONIC TECHNOLOGIES CO., LTD. 5 QW-R105-011,B UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.