DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Series M Miniature Toggles www.nkk.comA48 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 6A @ 125V AC & 3A @ 250V AC 4A @ 30V DC for On-None-On & On-None-Of f; 3A @ 30V DC for all other circuits Logic Level (gold): 0.4V A maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Logic/Power Level (gold over silver): Combines silver & gold ratings No te: Find additional explanation of dual rating & operating range in Supplement section. Other Ratings Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold Insulation Resistance: 1,000 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts and case for 1 minute minimum Mechanical Life: 100,000 operations minimum; 50,000 operations minimum for flat, locking & splashproof devices Electrical Life: 25,000 operations minimum for silver; 50,000 operations minimum for gold; 50,000 operations minimum for silver at 3A @ 125V AC Angle of Throw: 25° Materials & Finishes T oggle: Brass with chrome plating Frame: Stainless steel Bushing: Brass with nickel plating Suppor t Bracket: Brass with tin plating Case: Diallyl phthalate resin (UL94V–0) Movable Contactor: Phosphor bronze with silver or gold plating Movable Contacts: Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Stationar y Contacts: Silver with silver plating (code W); copper or brass with gold plating (code G); or silver with gold plating (code A) T erminals: Copper or brass with silver plati ng; or copper or brass with gold plating Environmental Data Operating T emp Range: –30°C through +85°C (–22°F through +185°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & retur ning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Sealing: Splashproof bushing options B3, D3, D8, L3, & L8, which have o-rings inside & outside the bushing, meet IP67 of IEC60529 Standar ds. Installation Mounting T orque: 3.0Nm (26.55 l b•in) double nut for large bushing; 1.5Nm (13 l b•in) double nut & 0.7Nm (6 lb•in) single nut for all other bushings Processing Soldering: W ave Soldering (PC version) for Gold: See Profile A in Supplement section. Manual Soldering for Gold: See Profile A in Supplement section. W ave Soldering (PC version) for Silver: See Profile B in Supplement section. M anual Soldering for Silver: See Profile B in Supplement section. Note: Lever must be in OFF (center) position while soldering. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution Standards & Certifications Flammability Standards: UL94V–0 for case UL: File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “ /CUL” before dash in part number to order UL recognized switch. All models recognized at 6A @ 125V AC, 3A @ 250V AC or 0.4V A maximum @ 28V DC maximum. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” before dash in part number to order CSA certified switch. All models cer tified at 6A @ 125V AC or 3A @ 250V AC or 0.4VA maximum @ 28V maximum.
www.nkk.com A49 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt Distinctive Characteristics Antirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggle has two flatted sides which fit into a complementary opening inside bushing. Antijamming design protects contacts from damage due to excessive downward force on actuator. High torque bushing construction prevents rotation or separation from frame during installation. High insulating barriers increase isolation of circuits in multipole devices and provide added protection to contact points. Molded diallyl phthalate case has a UL flammability rating of 94V-0. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Prominent external insulating barriers increase insulation resistance and dielectric strength. Interlocked actuator block, lever, and interior guide prevent switch failure due to biased lever movement. Clinching of frame to case well above base and terminals provides 1,500V dielectric strength. Actual Size Bushing Mount Page A48 Angle PC Mount Page A66 Bracket PC Mount Page A60
TYPICAL SWITCH ORDERING EXAMPLE www.nkk.com A1 Series M Angle PC Mount Miniature Toggles www.nkk.comA1 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt M20 Gold Contacts with 0.4VA Rating .200” (5.08mm) Bat Toggle Contact Materials & Ratings W Silver; Rated 6A @ 125V AC & 3A @ 250V AC G Gold; Rated 0.4VA max @ 28V AC/DC max A Gold over Silver; Rated 6A @ 125V AC & 0.4VA max @ 28V AC/DC max DESCRIPTION FOR TYPICAL ORDERING EXAMPLE M2012S2A2G40 SPDT ON-NONE-ON Circuit Terminals 30 .150” (3.81mm) Right Angle PC (1-3 Pole)
32 Right Angle PCB
(1 Pole & 0.4VA Rating Only) 40 .150” (3.81mm) Vertical PC (1-4 Pole) 45 .100” (2.54mm) Vertical PC (1-4 Pole) .280” (7.1mm) Smooth Bushing with Keyway Vertical PC Terminals with .150” (3.81mm) Terminal Spacing Small Bushings A2 .280” (7.1mm) Smooth with Keyway S2 .350” (8.9mm) Smooth with Keyway A1 .280” (7.1mm) Threaded with Keyway S1 .350” (8.9mm) Threaded with Keyway Bushing For Locking Levers L2 Smooth with Keyway for Lever Lock Locking Lever L .201” (5.1mm) Dia. Locking Lever Optional Caps B For S Bat Toggle C Conical Cap for S Bat Toggle Cap Colors A Black B White C Red E Yellow F Green G Blue A2S21 G 402 Circuits
2 ON NONE ON
3 ON OFF ON
5 ON NONE (ON)
8 (ON) OFF (ON)
9 ON OFF (ON)
4 ON ON ON
6 (ON) ON (ON)
7 ON ON (ON)
( ) = Momentary 3-ON circuits available with double and four pole bases only Small Toggles S .413” (10.5mm) Bat S2 .200” (5.08mm) Bat S3 .256” (6.5mm) Bat E .450” (11.4mm) Flatted E2 .256” (6.5mm) Flatted Toggle dimensions are based on use with a .350” (8.9mm) bushing; add .070” (1.78mm) to toggle length when combin- ing with a .280” (7.1mm) bushing. Standard Toggle, Bushing, & Terminal Combinations: S2A2G30, S2A2G40, SS2G30, SS2G40, LL2G30, & LL2G40 Poles
1 SPDT
2 DPDT
models only. Cap for Locking Lever No Code Nickel Plated Supplied with Switch A Black C Red G Blue IMPORTANT: Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering in- structions are noted on General Specifi- cations page.
Series M Angle PC Mount Miniature Toggles www.nkk.comA68 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles External connection must be made during field installation. The SP3T model utilizes a double pole base. External connection must be made during field installation. The DP3T model utilizes a four pole base. (out)(out) (out) (out) (out) (out) External Conn Common (in) Common (in) 4 7 10 12 96 3 5 8 11 (out) (out)(out) External Conn Common (in) POLES & CIRCUITS Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Down Center Up Down Center Up SP M2012 M2013 M2015 M2018 M2019 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 OPEN 2-1 SPDT DP M2022 ON NONE ON 2-3 5-6 OPEN 2-1 5-4 DPDT M2023 ON OFF ON M2025 ON NONE (ON) M2028 (ON) OFF (ON) M2029 ON OFF (ON) M2032 ON NONE ON 2-3 5-6 8-9 OPEN 2-1 5-4 8-7 3PDT M2033 ON OFF ON M2035 ON NONE (ON) M2038 (ON) OFF (ON) M2039 ON OFF (ON) M2042 ON NONE ON 2-3 5-6 8-9 11-12 OPEN 2-1 5-4 8-7 11-10 4PDT M2043 ON OFF ON M2045 ON NONE (ON) M2048 (ON) OFF (ON) M2049 ON OFF (ON) Note: T erminal numbers are not actually on the switch. * Reverse circuits available for ver tical mount SP & DP upon request. Keyway Keyway 2 (COM) 1012 79461 3 2 58 (COM) 2 5 (COM) 8 31 64 97 46 13 25 (COM) 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 7 (out) 10 (out) 12 (out) 8 (in)2 (in) 51 1 External Connection External Connection 1 (out) 4 (out) 6 (out) 7 (out) 10 (out) 12 (out) 8 (in)2 (in) 51 1 External Connection External Connection 1 (out) 4 (out) 6 (out) 7 (out) 10 (out) 12 (out) 8 (in)2 (in) 51 1 External Connection External Connection For 3 Throw (3-On) Connected Terminals & Schematics Pole Model Down Center Up Down Center Up SP M2024 M2026 M2027 ON (ON) ON ON ON ON ON (ON) (ON) DP M2044 M2046 M2047 ON (ON) ON ON ON ON ON (ON) (ON) 8-9 11-12 8-9 11-10 8-7 11-10
Series MAngle PC Mount Miniature Toggles www.nkk.com A69 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt SMALL TOGGLES .413” (10.5mm) BatS .256” (6.5mm) Bat Important: T oggle length changes based on bushing selected. All illustrations are shown with .350” (8.9mm) long bushing. When using a .280” (7.1mm) long bushing, toggle length increases .070” (1.78mm). 25° (2.8) Dia .110 (10.5) .413 25° (2.5) .098 (6.5) .256 (4.2) .165 (5.08) .200 25° (2.54) .100 (11.4) .450 .450” (11.4mm) FlattedE .256” (6.5mm) Flatted SMALL BUSHINGS (6.5) Dia .256 (5.6) .220 (0.6) .024 (6.5) Dia .256 (6.5) .256 (2.2) Dia .087 Panel Cutouts .350” (8.9mm) Smooth with KeywayS2 (0.9) .035 (8.9) .350 (6.2) Dia .244 (8.0) Dia .315 (2.5) .098 (0.8) .031 For A2, S2, A1 or S1 Bushing with Keyway For A1 or S1 Bushing with Locking Ring .350” (8.9mm) Threaded with Keyway (8.0) Dia .315 (2.5) .098 (0.8) .031 (0.9) .035 (8.9) .350 1/4-40 Thd Maximum Panel Thickness with Standard Hardware: .102” (2.6mm) .280” (7.1mm) Smooth with KeywayA2 (8.0) Dia .315 (2.5) .098 (0.8) .031 (0.9) .035 (7.1) .280 (6.2) Dia .244 When using this bushing, toggle length is increased by .070” (1.78mm). A1 .280” (7.1mm) Threaded with Keyway (0.9) .035 (7.1) .280 1/4-40 Thd (8.0) Dia .315 (2.5) .098 (0.8) .031 When using this bushing, toggle length is increased by .070” (1.78mm). Maximum Panel Thickness with Standard Hardware: .031” (0.8mm) Standard Hardware:
2 Hex Nuts (AT513H)
1 Lockwasher (AT509)
1 Locking Ring (AT507H)
For dimensions, see Accessories & Hardware section. Standard Material & Finish: Brass with Bright Chrome Contact factory for optional finishes. .200” (5.08mm) BatS2 (2.7) Dia .106 25° (5.08) .200 (6.5) .256 (2.7) Dia .106 25°
Series M Angle PC Mount Miniature Toggles www.nkk.comA70 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles 30 .150” (3.81mm) Right Angle PC (1-3 Pole) Smooth with KeywayLL2 LOCKING LEVER & BUSHING Locking Mechanism (0.8) .031 (2.5) .098 (8.0) Dia .315 (16.5) .650 (15.0) .591 (9.3) .366 (0.9) .035 (4.6) Dia .181 (7.0) .275 (8.0) .315 25° (5.1) Dia .201 (6.2) Dia .244 on-none-on 2 positions lock on-none-(on) 1 position locks (on)-off-(on) (on)-on-(on) 1 position locks on-off-on on-on-on 3 positions lock on-off-(on) on-on-(on) 2 positions lock TERMINALS (1 Pole & 0.4VA Rating Only) Terminal dimensions are shown on the Typical Switch Dimensions pages which follow. Single Pole Double Pole Three Pole 2 13 (4.7) Typ .185 (2.54) Typ .100 (14.35) .565 (1.8) Dia Typ .073 5 46 8 79 (3.81) Typ .150 (1.8) Dia Typ .073 2 13 (4.7) Typ .185 (2.54) Typ .100 (12.7) .500 5 46 (3.81) .150 (9.27) .365 (3.96) Typ .156 (1.8) Dia Typ .073 1 2 3 (2.54) Typ .100 (4.7) Typ .185 (1.8) Dia Typ .073 1 2 3 (12.7) .500 (2.54) Typ .100 CONTACT MATERIALS & RATINGS Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Note: See Supplement section to find complete explanation of operating range. Gold over Silver Power Level or Logic Level 6A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range. A W G Lever Material & Finish: Brass with Chrome Plating Supplied with Cap AT427 Material & Finish: Brass with Nickel Plating Cap for Locking LeverNo Code Color Codes for Optional Anodized Aluminum Caps BlackA RedC BlueG
Series MAngle PC Mount Miniature Toggles www.nkk.com A71 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt TERMINALS (Continued) OPTIONAL CAPS & CAP COLORS .150” (3.81mm) Vertical PC (1-4 Pole) .100” (2.54mm) Vertical PC (1-4 Pole) Single Pole Double Pole Three Pole Four Pole AT415 for S Bat Toggle AT444 Conical Cap for S Bat Toggle CB BlackA Colors Available YellowE White RedC BlueG B GreenF Material: Polyethylene Material: Polyethylene (5.0) Dia .197 (13.5) .532 (12.0) .472 25° 25° (4.8) Dia .189 (11.5) .452(13.1) .516 Terminal dimensions are shown on the Typical Switch Dimensions pages which follow. STANDARD HARDWARE Single Pole Double Pole Three Pole Four Pole (12.7) .500 (1.8) Dia Typ .073 (2.54) Typ .100 (3.81) Typ .150 (2.4) Typ .094 (1.8) Dia Typ .073 (12.7) .500 (2.54) Typ .100 (3.81) Typ .150 (1.8) Dia Typ .073 (4.8) Typ .189 (2.54) Typ .100 (14.35) .565 (3.81) Typ .150 (1.8) Dia Typ .073 (4.8) Typ .189 (2.54) Typ .100 (14.35) .565 (3.81) Typ .150 71 0 (12.7) .500 (1.8) Dia Typ .073 (2.54) Typ .100 (2.54) Typ .100 (4.8) .189 (1.8) Dia Typ .073 3 6 (2.54) Typ .100 (2.54) Typ .100 (12.7) .500 (14.35) .565 (4.8) Typ .189 (1.8) Dia Typ .073 3 6 4 7 (2.54) Typ .100 (2.54) Typ .100 (14.35) .565 (4.8) Typ .189 (1.8) Dia Typ .073 3 6 4 7 (2.54) Typ .100 (2.54) Typ .100 AT513H for Inch AT513M for Metric Hex Nut (2 per switch) Brass/Nickel AT507H for Inch AT507M for Metric Locking Ring (1 per switch) Steel with Zinc/Chromate AT509 Lockwasher (1 per switch, none with splashproof) Steel with Zinc/Chromate (6.4) Dia .252 (10.2) Dia .402 (0.5) .020 (2.0) .079 (5.5) .217 (6.0) Dia .236 (12.0) Dia .472 (1.7) .067 (0.8) .031 (8.0) .315 1/4-40 Thd or M6 P0.75 (9.0) .354 (1.5) .059
Series M Angle PC Mount Miniature Toggles www.nkk.comA72 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles TYPICAL SWITCH DIMENSIONS .150” (3.81mm) Right Angle PC Single Pole M2012S2A2G30 .150” (3.81mm) Right Angle PC Double Pole M2022S2A2G30 .150” (3.81mm) Right Angle PC Three Pole Right Angle PCB Single Pole • Reverse Circuit M2032S2A2G30 M2012S2A2G32 (2.9) .114 (1.4) Typ .055 (5.08) .200 Keyway (6.2) Dia .244 (1.27) .050 (0.4) .016 (1.09) .043 (6.86) .270 (7.32) .288 (12.7) .500 12 3 (13.0) .512 (7.9) .311 (4.3) .169 (0.8) Typ .031 (4.7) Typ .185Keyway (2.9) .114 (1.4) Typ .055 (5.08) .200 (6.2) Dia .244 (1.27) Typ .050 (3.81) .150 (12.7) .500 (7.32) .288 (6.86) .270 (0.4) .016 (1.09) .043 654 1 2 3 (12.7) .500 (4.3) .169 (13.0) .512 (0.8) Typ .031 (4.7) Typ .185 Keyway (2.9) .114 (1.4) Typ .055 (5.08) .200 (0.9) .035 (6.2) Dia .244 (1.27) Typ .050 (3.81) Typ .150 (0.4) .016 (1.8) .071 (14.35) .565 (8.0) .315 (6.86) .270 78 9 6 5 4 12 3 (17.5) .689 (4.3) .169 (13.0) .512 (0.8) Typ .031 (4.7) Typ .185 (1.4) Typ .055 (5.08) .200 Keyway (7.9) .311 25° (2.7) Dia .106 (6.2) Dia .244 (4.55) .179 (0.8) .031 (0.4) .016 (0.9) .035 (6.2) .245 (6.86) .270 (8.9) .350 (9.3) .365 32 1 (8.5) .335 (2.7) .106 (13.0) .512 (3.96) Typ .156 (1.4) Typ .055
Series MAngle PC Mount Miniature Toggles www.nkk.com A73 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt TYPICAL SWITCH DIMENSIONS Single Pole .150” (3.81mm) V ertical PC M2012S2A2G40 Double Pole .150” (3.81mm) V ertical PC M2022S2A2G40 Three Pole .150” (3.81mm) V ertical PC Four Pole .150” (3.81mm) V ertical PC M2032S2A2G40 M2042S2A2G40 (1.4) Typ .055 (5.08) .200 Keyway (6.86) .270 (7.32) .288 (12.7) .500 (3.81) Typ .150 (0.4) .016 (1.1) .043 (0.8) Typ .031 (2.7) Dia .106 (6.2) Dia .244 25° Keyway (1.4) Typ .055 (5.08) .200 (6.2) Dia .244 25° (2.7) Dia .106 (0.8) Typ .031 (3.81) Typ .150 (12.7) .500 (7.32) .288 (6.86) .270 (0.4) .016 (1.1) .043 4 1 (13.0) .512 (1.27) Typ .050 (4.8) .189 (12.7) .500 (2.7) .106 4 1 (13.0) .512 (1.27) Typ .050 (4.8) Typ .189 (17.5) .689 (2.7) .106 25° (2.7) Dia .106 (6.2) Dia .244 (0.9) .035 (0.8) Typ .031 (3.81) Typ .150 (0.4) .016 (1.8) .071 (8.0) .315 (6.86) .270 (14.35) .565 Keyway (1.4) Typ .055 (5.08) .200 Keyway (1.4) Typ .055 (5.08) .200 25° (2.7) Dia .106 (6.2) Dia .244 (0.9) .035 (0.8) Typ .031 (3.81) Typ .150 (0.4) .016 (1.8) .071 (8.0) .315 (6.86) .270 (14.35) .565 (13.0) .512 (1.27) Typ .050 (22.3) .878 (2.7) .106 4 1 710 (4.8) Typ .189 (13.0) .512 (2.7) .106 (1.27) .050 (7.9) .311
Series M Angle PC Mount Miniature Toggles www.nkk.comA74 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles TYPICAL SWITCH DIMENSIONS .100” (2.54mm) Vertical PC Single Pole .100” (2.54mm) Vertical PC Double Pole .100” (2.54mm) V ertical PC Three Pole .100” (2.54mm) V ertical PC Four Pole M2012S2A2G45 M2022S2A2G45 M2032S2A2G45 M2042S2A2G45 (1.4) Typ .055 (5.08) .200 Keyway (7.32) .288 25° (2.7) Dia .106 (6.2) Dia .244 (0.8) Typ .031 (2.54) Typ .100 (0.4) .016 (1.1) .043 (6.86) .270 (12.7) .500 Keyway (1.4) Typ .055 (5.08) .200 (7.32) .288 25° (2.7) Dia .106 (6.2) Dia .244 (0.8) Typ .031 (2.54) Typ .100 (0.4) .016 (1.1) .043 (6.86) .270 (12.7) .500 4 1 (13.0) .512 (1.27) Typ .050 (4.8) .189 (12.7) .500 (2.7) .106 Keyway (1.4) Typ .055 (5.08) .200 25° (2.7) Dia .106 (6.2) Dia .244 (0.9) .035 (0.8) Typ .031 (2.54) Typ .100 (0.4) .016 (1.8) .071 (8.0) .315 (6.86) .270 (14.35) .565 4 1 (13.0) .512 (1.27) Typ .050 (4.8) Typ .189 (17.5) .689 (2.7) .106 Keyway (1.4) Typ .055 (5.08) .200 25° (2.7) Dia .106 (6.2) Dia .244 (0.9) .035 (0.8) Typ .031 (2.54) Typ .100 (0.4) .016 (1.8) .071 (8.0) .315 (6.86) .270 (14.35) .565 (13.0) .512 (1.27) Typ .050 (22.3) .878 (2.7) .106 4 1 710 (4.8) Typ .189 (13.0) .512 (2.7) .106 (1.27) .050 (7.9) .311