M2022 COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Common Mode EMI Filters - M2022 Series Document 151-1 Document 151-1 Revised 10/30/08 Part I nductance2 DCR max Irms3 Isolation number1 (µH) (mOhm) (mAmp) (Vrms) M2022-AL_ 4.2 ±10% 800 500 500 M2022-ALPL_ 4.0 ±10% 990 500 500 M2022-ASL_ 11.5 min 850 500 500 These common mode filters provide excellent noise attenuation in a compact, surface mount package. They’re built in an 1812 size configuration that’s ideal for auto insertion. In addition to the standard filter, a low profile (-ALPL) and shielded (-ASL) version are available. Features include excellent isolation, environmental sta- bility and low cost. Coilcraft can also supply custom filters with special combinations of impedance, response and current handling. M2022-AL, M2022-ALPL M2022-ASL Weight: M2022-AL 155 mg; M2022-ALPL 85.5 mg; M2022-ASL 319 mg Terminations: Gold over nickel over moly-manganese. Tape and reel: 600/7″ reel; 2200/13″ reel 12 mm tape width For packaging data see Tape and Reel Specifications section. 4 1 A B E H G F C D 4 1 A B E H G F C D Color dot over pin 1 0.048 1,22 0.015 0,38 0.115 2,92 0.018 0,46 0.020 0,51 0.057 1,45 Recommended Land Pattern 0.015 0,38 ref 0.040 1,02 0.020 0,51 min 0.030 ±0.002 0,76 ±0,05 Pad Detail M2022-AL A max B max C max D ref E ref F ref G min H 4,95 3,81 3,43 1,78 2,54 4,52 1,02 0,76 M2022-ALPL A max B max C max D ref E ref F ref G min H 4,95 3,81 2,01 1,78 2,54 4,52 1,02 0,76 M2022-ASL A max B max C max D ref E ref F ref G min H 5,87 4,98 3,81 2,72 2,54 4,52 1,02 0,76 1. When ordering, please specify packaging codes: M2022-ALPL C Packaging: C =7 ″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D=1 3″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel). 2. Inductance is per winding, measured at 10 MHz. 3. Current that causes a 30°C temperature rise from 25°C ambient. 4. Ambient temperature range: –40°C to +85°C with Irms current 5. Storage temperature range: Component: –40°C to +85°C Packaging: –40°C to +80°C 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. M2022-AL, M2022-ALPL Typical Attenuation* Typical Impedance vs Frequency M2022-ASL Typical Attenuation* Typical Impedance vs Frequency Document 151-2 Document 151-2 Revised 10/30/08 *Measured on Agilent/HP 8753D network analyzer. Ref: 50 Ohms. 0.1 1 10 Frequency (MHz) Attenuation (dB) 100 1000 Common mode Differential mode 11 0 100 Frequency (MHz) Impedance (kOhms) 0.1 0.01 0.001 100 1000 0.01 0.1 1 Common mode Differential mode Frequency (MHz) Attenuation (dB) 100 1000 10000 11 0 100 Frequency (MHz) Impedance (kOhms) 0.1 0.01 0.001 100 1000