DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Common Mode EMI Filters – M2022 Document 151-1 Document 151-1 Revised 10/30/08 Part Inductance2 DCR max Irms3 Isolation number1 (µH) (mOhm) (mAmp) (Vrms) M2022-AL_ 4.2 ±10% 800 500 500 M2022-ALPL_ 4.0 ±10% 990 500 500 M2022-ASL_ 11.5 min 850 500 500 These common mode filters provide excellent noise at- tenuation in a compact, surface mount package. They’re built in an 1812 size configuration that’s ideal for auto insertion. In addition to the standard filter, a low profile (-ALPL) and shielded (-ASL) version are available. Features include excellent isolation, environmental stabil- ity and low cost. Coilcraft can also supply custom filters with special combinations of impedance, response and current handling. M2022-AL, M2022-ALPL M2022-ASL 4 1 A B E H G F C D 4 1 A B E H G F C D Color dot over pin 1 0.048 1,22 0.015 0,38 0.115 2,92 0.018 0,46 0.020 0,51 0.057 1,45 Recommended Land Pattern 0.015 0,38 ref 0.040 1,02 0.020 0,51 min 0.030 ±0.002 0,76 ±0,05 Pad Detail M2022-AL A max B max C max D ref E ref F ref G min H 4,95 3,81 3,43 1,78 2,54 4,52 1,02 0,76 M2022-ALPL A max B max C max D ref E ref F ref G min H 4,95 3,81 2,01 1,78 2,54 4,52 1,02 0,76 M2022-ASL A max B max C max D ref E ref F ref G min H 5,87 4,98 3,81 2,72 2,54 4,52 1,02 0,76 1. When ordering, please specify packaging codes: M2022-ALPLC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel). 2. Inductance is per winding, measured at 10 MHz. 3. Current that causes a 30°C temperature rise from 25°C ambient. 4. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. M2022 Common Mode EMI Filters Typical Attenuation* Typical Impedance vs Frequency M2022-ASL Typical Attenuation* Typical Impedance vs Frequency Document 151-2 *Measured on Agilent/HP 8753D network analyzer. Ref: 50 Ohms. 0.1 11 0 Frequency (MHz) Attenuation (dB) 100 1000 Common mode Differential mode 11 0 100 Frequency (MHz) Impedance (kOhms)1 0.1 0.01 0.001 100 1000 0.01 0.1 1 Common mode Differential mode Frequency (MHz) Attenuation (dB) 100 1000 10000 11 0 100 Frequency (MHz) Impedance (kOhms)1 0.1 0.01 0.001 100 1000 Document 151-2 Revised 10/30/08 Core material Ferrite Terminations RoHS compliant gold over nickel over moly-manganese Weight: M2022-AL 155 mg; M2022-ALPL 85.5 mg; M2022-ASL 319 mg Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +85°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 600 per 7″ reel; 2200 per 13″ reel Plastic tape: 12 mm wide, 8 mm pocket spacing M2022-AL: 0.3 mm thick, 3.7 mm pocket depth M2022-ALP: 0.3 mm thick, 2.25 mm pocket depth M2022-AS: 0.25 mm thick, 3.94 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf.