DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 29
Technical content
Series M Miniature Rockers B62 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 6A @ 125V AC & 3A @ 250V AC 4A @ 30V DC for On-None-On; 3A @ 30V DC for all other circuits Logic Level (gold): 0.4V A maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Logic/Power Level (gold over silver): Combines silver & gold ratings Note: Find additional explanation of dual rating & operating range in Supplement section. Other Ratings Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold Insulation Resistance: 1,000 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts and case for 1 minute minimum Mechanical Life: 50,000 operations minimum Electrical Life: 25,000 operations minimum for silver; 50,000 operations minimum for gold; 50,000 operations minimum for silver at 3A @ 125V AC Angle of Throw: 25° Materials & Finishes Actuator Clip & Mounting Frame: Stainless Steel Body Frame: Stainless steel Case: Diallyl phthalate resin (UL94V–0) Movable Contactor: Phosphor bronze with silver or gold plating Movable Contacts: Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Stationary Contacts: Silver with silver plating (code W); copper or brass with gold plating (code G); or silver with gold plating (code A) Terminals: Copper or brass with silver plating; or copper or brass with gold plating Environmental Data Operating Temp Range: –30°C through +85°C (–22°F through +185°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & retur ning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Processing Soldering: Wave Soldering (PC version) for Gold: See Profile A in Supplement section. Manual Soldering for Gold: See Profile A in Supplement section. W ave Soldering (PC version) for Silver: See Profile B in Supplement section. M anual Soldering for Silver: See Profile B in Supplement section. Note: Actuator must be in OFF (center) position while soldering. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V–0 for case UL: File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “/CUL ” before first dash in part number to order UL recognized switch. Al l models recognized at 6A @ 125V AC, 3A @ 250V AC or 0.4VA maximum @ 28V DC maximum. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” before first dash in part number to order CSA certified switch. All models certified at 6A @ 125V AC or 3A @ 250V AC or 0.4VA maximum @ 28V maximum.
IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com Distinctive Characteristics Three methods of panel mounting: flat frame for flush with face or subpanel, snap-in, and PCB. High insulating barriers increase isolation of circuits in multipole devices and provide added protection to contact points. The molded diallyl phthalate case has a UL 94V-0 flammability rating. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Prominent external insulating barriers increase insulation resistance and dielectric strength. Bias guard prevents misalignment of contacts; interlocking of actuator block with rocker and internal guide does not allow transmission of diagonal force on rocker to reach contact mechanism. Clinching of the frame to the case well above the base and terminals provides 1,500V dielectric strength. Actual Size Flat Frame Mount Page B83 Bracket PC Mount Page B72 Snap-in Mount Page B64
Series M Snap-In Mount Miniature Rockers B64 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com TYPICAL SWITCH ORDERING EXAMPLE M20 Contact Materials & Ratings W Silver; Rated 6A @ 125V AC & 3A @ 250V AC G Gold; Rated 0.4V A max @ 28V AC/DC max A Gold over Silver; Rated 6A @ 125V AC & 0.4V A max @ 28V AC/DC max Terminals
01 Solder Lug
02 Quick Connect
03 .250” (6.35mm) Straight PC 05 .425” (10.8mm) Wirewrap 06 .750” (19.05mm) Wirewrap 07 .964” (24.5mm) Wirewrap 08 1.062” (27.0mm) Wirewrap Poles
1 SPDT
2 DPDT
Rockers & Paddles F .450” (11.43mm) Wide Rocker G .450” (11.43mm) Wide Paddle S .453” (11.5mm) False Illluminated Rocker in Black only
01 F1 2
2 ON NONE ON
3 ON OFF ON
5 ON NONE (ON)
8 (ON) OFF (ON)
9 ON OFF (ON)
4 ON ON ON
6 (ON) ON (ON)
7 ON ON (ON)
( ) = Momentary 3-ON circuits Rocker & Paddle Colors A Black B White C Red E Yellow F Green G Blue H Gray Snap-in FrameSPDT ON-NONE-ON Circuit DESCRIPTION FOR TYPICAL ORDERING EXAMPLE M2012TJW01-FC-1A Red .450” (11.43mm) Wide Rocker Solder Lug Terminals Silver Contacts with 6–Amp Rating Mounting Frame TJ Snap-in Frame TJ W C Black Bezel without LED
Series MSnap-In Mount Miniature Rockers B65 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com TYPICAL SWITCH ORDERING EXAMPLE 1 A Snap-in Frame SPDT ON-NONE-ON Circuit DESCRIPTION FOR TYPICAL ORDERING EXAMPLE M2012TJW01-FC-3A-CF Solder Lug Terminals Silver Contacts with 6–Amp Rating Black Bezel with
2 Round LEDs
1 Bezel without LED
LED ColorsBezel ColorsOptional Bezels
2 Bezel with 1 Round LED A Black
1 LED
2 LEDs
Red .450” (11.43mm) Wide Rocker
3 Bezel with 2 Round LEDs
4 Bezel with 2 Rectangular
IMPORTANT: Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page.
Series M Snap-In Mount Miniature Rockers B66 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com For 3 Throw (3-On) Connected Terminals & Schematic Pole Model Down Center Up External Connection SP M2024 M2026 M2027 ON (ON) ON ON ON ON ON (ON) (ON) External connection must be made during field installation. The SP3T model utilizes a double pole base. (out) (out)(out) External Conn Common (in) Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Down Center Up Down Center Up SP M2012 M2013 M2015 M2018 M2019 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 OPEN 2-1 SPDT DP M2022 ON NONE ON 2-3 5-6 OPEN 2-1 5-4 DPDT M2023 ON OFF ON M2025 ON NONE (ON) M2028 (ON) OFF (ON) M2029 ON OFF (ON) Note: T erminal numbers are not actually on the switch. POLES & CIRCUITS 2 (COM) 46 13 25 (COM) MOUNTING FRAME Snap-in FrameTJ Panel Thickness without Bezel: .039” ~ .126” (1.0mm ~ 3.2mm) Panel Thickness with Bezel: .039” ~ .098” (1.0mm ~ 2.5mm) CONTACT MATERIALS & RATINGS Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Note: See Supplement section to find complete explanation of operating range. Gold over Silver Power Level or Logic Level 6A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range. A W G Panel Cutout for Single Pole without Bezel Panel Cutout for Double Pole without Bezel (18.0) .710 (12.2) .480 25° (4.3) .170 (2.54) Dia .100 (15.9) .626 (12.5) .492 (15.9) .626 (13.1) .516 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection
Series MSnap-In Mount Miniature Rockers B67 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com TERMINALS ROCKERS & PADDLES Solder Lug 02 .062” (1.57mm) Wide Quick Connect .425” (10.8mm) Wirewrap or Extended PC .750” (19.05mm) Wirewrap or Extended PC .964” (24.5mm) Wirewrap or Extended PC 1.062” (27.0mm) Wirewrap or Extended PC .250” (6.35mm) Straight PC If using as extended PC terminal, refer to the above footprints. Dimension A = terminal lengths as shown beside the terminal codes at the left. Single Pole Double Pole (6.35) .250Epoxy Seal Thk = (0.8) .031 (1.57) .062 Epoxy Seal (2.0) .079 (2.0) .079 (4.0) .157 (1.1) .043 Thk = (0.8) .031 Epoxy Seal (4.8) .189 (6.35) .250 (1.17) .046 Thk = (0.8) .031 Thk = (0.8) .031 Epoxy Seal A (1.27) .050 (4.7) Typ .185 (4.8) .189 (1.8) Dia Typ .073 3 6 (4.7) Typ .185 (1.8) Dia Typ .073 AT4150 .450” (11.43mm) Wide Rocker F BlackACap Colors Available: WhiteB RedC YellowE GreenF BlueG Material: Polyamide Finish: Matte Colors Available: A, B, C, E, F, G, H GrayH AT4151 .450” (11.43mm) Wide Paddle G Material: Polyamide Finish: Matte Colors Available: A, B, C, E, F, G, H AT466 .453” (11.5mm) False Illuminated RockerS Rocker False Illuminator Material: Polycarbonate Acrylonitrile Butadiene Styrene Finish: Glossy Colors: Black White and Red When a bezel is selected with AT466, glossy polycarbonate AT207 is supplied. (6.3) .248 (9.19) .362 (11.43) .450 (7.11) .280 (1.8) .071 (11.8) .465 (11.8) .465 (16.36) .644 (11.43) .450 (2.36) .093 (1.8) .071 (5.84) R .230 (8.6) .339 (11.3) .445 (7.7) .303 (1.8) .071 (11.8) .465 (11.5) .453
Series M Snap-In Mount Miniature Rockers B68 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com YellowE OPTIONAL SNAP-IN BEZELS & BEZEL COLORS AT2107 Bezel1 BlackA WhiteB GreenF BlueG Material: Polyamide Finish: Matte GrayH AT208 Bezel for AT070 LED2 Material: Polycarbonate Finish: Glossy Contact factory for matte finish. AT212 Bezel for AT617 LED Material: Polycarbonate Finish: Semi-glossy AT213 Bezel for AT618 LED Material: Polycarbonate Finish: Semi-glossy Bezel Assembly 45°Tab Tab 1. Pry out tab on bezel to a 45° angle. 2. Insert switch frame under tab and snap on bezel. 3. Push tab back into place. 4. Snap assembled bezel and switch into panel. (11.8) .465 (21.5) .846 (12.0) .472(15.6) .614 (2.2) .087 (30.2) 1.19 (19.0) .748 (12.0) .472 (11.8) .465 (13.5) .531 (15.6) .614 (5.4) Dia .213 (2.2) .087 (21.5) Sq .846 (11.8) .465 (10.0) .394 (12.0) .472 (2.2) .087 (7.8) .307 (3.0) Dia Typ .118 (8.0) .315 (11.8) .465 (10.0) .394 (12.0) .472 (2.2) .087 (7.8) .307 (21.5) Sq .846(5.0) Typ .197 (8.0) .315 (2.0) Typ .079 BlackA BlackA BlackA LED colors & specifications on next page. LED colors & specifications on next page. LED colors & specifications on next page. (15.9) .626 (15.9) .626 A Single Pole Double Pole A (12.5)mm .492” (13.1)mm .516” Single Pole Double Pole A (12.5)mm .492” (13.1)mm .516” B (6.25)mm .246” (6.55)mm .258” (15.9) .626 (13.8) .543 (8.8) Dia .346 B A (15.9) .626 A (15.9) .626 A Single Pole Double Pole A (18.4)mm .724” (18.7)mm .736” Single Pole Double Pole A (18.4)mm .724” (18.7)mm .736”
Series MSnap-In Mount Miniature Rockers B69 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com Top LED Bottom LED Circuit Mark This Side Top LED Bottom LED Circuit Mark This Side Circuit Mark This Side AT070 AT617 AT618 Color Red Green Red Yellow Green Red Yellow Green Maximum Forward Current IFM 25mA 50mA 30mA 30mA 25mA 25mA 30mA 25mA Typical Forward Current IF 20mA 30mA 20mA 20mA 20mA 20mA 20mA 20mA Maximum Reverse Voltage VRM 4V 5V 5V 5V 5V 5V 5V 5V Current Reduction Rate Above 25°C ∆IF 0.33 mA/°C 0.40 mA/°C 0.40 mA/°C 0.40 mA/°C 0.33 mA/°C 0.33 mA/°C 0.40 mA/°C 0.33 mA/°C Ambient Temperature Range (when used with a bezel) –10° ~ +70°C –15° ~ +70°C –25° ~ +70°C LED COLORS & SPECIFICATIONS Bezel Orientation on Switch AT070 LED For Bezel AT208 with 1 LED The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is independent of switch operation. LED is colored in OFF state. If the source voltage is greater than the rated voltage of the LED, a ballast resistor must be connected in series with the lamp. The ballast resistor calculation and more lamp detail are shown in the Supplement section. (+) (-) AT617 LED For Bezel AT212 with 2 Round LEDs AT618 LED For Bezel AT213 with 2 Rectangular LEDs Note: Lead lengths may differ from manufacturing lot to lot. The longer lead is the anode (+). FECFECC F (5.08) Dia .200 (7.7) .303 (+) (-) (5.0) .197 (3.0) Dia .118 (+) (-) (7.0) .276 (5.0) .197 (+) (-) LEGENDS NKK Switches can provide custom legends for caps. Contact factory for more information. Suggested Printable Area for Cap AT4150 Recommended Print Method: Pad Print Epoxy based ink is recommended. OFFON (9.91) .390 (3.36) Typ .132 (11.43) .450 (0.76) Typ .030 (0.76) Typ .030 (0.38) Typ .015 (4.5) Typ .177 Shaded areas are printable areas.
Series M Snap-In Mount Miniature Rockers B70 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com TYPICAL SWITCH DIMENSIONS Snap-in Frame • Solder Lug Single Pole M2012TJW01-FC Snap-in Frame • Solder Lug Double Pole M2022TJW01-FC Snap-in Frame • Solder Lug Single Pole Snap-in Frame • Solder Lug Double Pole M2012TJW01-GC M2022TJW01-GC (18.0) .709 (11.43) .450 (12.2) .480 25° (2.8) .110 (4.9) .194 (0.5) .020 (3.3) .130 (7.1) .279 (9.4) .371 (4.5) .177 (0.5) .020 (0.8) Typ .031 (4.7) Typ .185 (1.1) x (2.0) Typ .043 x .079 Circuit Mark This Side (13.0) .512 (2.0) Typ .079 (7.9) .311 (18.0) .709 (11.43) .450 (12.2) .480 (2.8) .110 (0.5) .020 (7.1) .279 (9.4) .371 (4.5) .177 (0.5) .020 (0.8) Typ .031 (4.7) Typ .185 (1.1) x (2.0) Typ .043 x .079 Circuit Mark This Side 25° (2.36) .093 (3.18) .125 (13.7) .539 (13.0) .512 (2.0) Typ .079 (7.9) .311 (18.0) .709 (11.43) .450 (12.2) .480 25° (2.8) .110 (4.9) .194 (0.5) .020 (3.3) .130 (7.1) .279 (9.4) .371 (4.5) .177 (0.5) .020 (0.8) Typ .031 (4.7) Typ .185 (1.1) x (2.0) Typ .043 x .079 Circuit Mark This Side (13.0) .512 6 3 4 1 (4.8) .189 (2.0) Typ .079 (12.7) .500 (18.0) .709 (11.43) .450 (12.2) .480 (2.8) .110 (0.5) .020 (7.1) .279 (9.4) .371 (4.5) .177 (0.5) .020 (0.8) Typ .031 (4.7) Typ .185 (1.1) x (2.0) Typ .043 x .079 Circuit Mark This Side 25° (2.36) .093 (3.18) .125 (13.7) .539 6 3 4 1 (13.0) .512 (4.8) .189 (2.0) Typ .079 (12.7) .500
Series MSnap-In Mount Miniature Rockers B71 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com TYPICAL SWITCH DIMENSIONS Single & Double Pole Snap-in Frame • AT2107 Bezel • Solder Lug M2012TJW01-FC-1A Double Pole Snap-in Frame • AT208 Bezel • Solder Lug M2022TJW01-FC-2A-C Single Pole Snap-in Frame • AT212 Bezel • Solder Lug Double Pole Snap-in Frame • AT213 Bezel • Solder Lug M2012TJW01-FC-3A-CF M2022TJW01-FC-4A-CF (15.6) .614 (11.8) .465 (11.43) .450 (12.0) .472 (21.5) .846 (2.2) .087 (6.4) .252 (9.4) .371 (4.5) .177 (4.01) .158 (4.3) .169 (0.5) .020 25° (5.6) .221 (1.1) x (2.0) Typ .043 x .079 (4.7) Typ .185 (0.8) Typ .031 Circuit Mark This Side (13.0) .512 (7.9) .311 (2.0) .079 (14.0) .551 (5.08) Dia .200 (30.2) 1.190 (12.0) .472 (11.43) .450 (11.8) .465 (15.6) .614 (13.5) .531 (19.0) .748 Circuit Mark This Side25° (4.9) .193 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (4.5) .177 (0.5) .020 (2.2) .087 (4.3) .169 (4.01) .158 (6.4) .252 (9.4) .371 (0.61) Sq .024 (15.3) Min .602 (4.7) Typ .185 (2.5) .098 (14.0) .551 (13.0) .512 (2.0) Typ .079 (12.7) .500 (4.8) .189 (10.0) .394 (7.8) .307 (12.0) .472 (8.0) .315 (11.43) .450 (11.8) .465 (3.0) Dia Typ .118 (21.5) Sq .846 Circuit Mark This Side25° (5.6) .221 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (4.5) .177 (0.5) .020 (2.2) .087 (4.3) .169 (4.01) .158 (6.4) .252 (9.4) .371 (4.7) Typ .185 (7.9) .311 (2.0) .079 (14.0) .551 (13.0) .512 (10.0) .394 (7.8) .307 (12.0) .472 (8.0) .315 (2.0) .079 (11.43) .450 (11.8) .465 (21.5) Sq .846 (5.0) Typ .197 Circuit Mark This Side25° (5.6) .221 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (4.5) .177 (0.5) .020 (2.2) .087 (4.3) .169 (4.01) .158 (6.4) .252 (9.4) .371 (4.7) Typ .185 (12.7) .500 (2.0) Typ .079 (14.0) .551 (13.0) .512 4(4.8) .189 (4.8) .189 (12.7) .500 (2.0) Typ .079 6 3 4 1 (13.0) .512 (14.0) .551
Series M Bracket PC Mount Miniature Rockers B72 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com TX TYPICAL SWITCH ORDERING EXAMPLE M20 Contact Materials & Ratings W Silver; Rated 6A @ 125V AC & 3A @ 250V AC G Gold; Rated 0.4V A max @ 28V AC/DC max A Gold over Silver; Rated 6A @ 125V AC & 0.4V A max @ 28V AC/DC max G1 3 Circuits 8 (ON) OFF (ON) 6 (ON) ON (ON) ( ) = Momentary 3-ON circuits Mounting Frames TX Narrow Frame for Small Actuator TZ Wide Frame for Large Actuator DESCRIPTION FOR TYPICAL ORDERING EXAMPLE M2013TXG41-DC Poles 3PDT (used only with terminal codes 30 & 41 & frame code TX) 4PDT DP3T (used only with terminal code 41 & frame code TX) SPDT ON-OFF-ON Circuit TX Frame with .365” (9.27mm) Wide Red Rocker Gold Contacts with 0.4VA Rating .150” (3.81mm) Vertical PC Terminals with Support
Series MBracket PC Mount Miniature Rockers B73 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com TYPICAL SWITCH ORDERING EXAMPLE DPDT ON-NONE-ON Circuit DESCRIPTION FOR TYPICAL ORDERING EXAMPLE M2022TZG23-JC TZ Frame with .595” (15.11mm) Wide Red Rocker Terminals For TX & TZ Frames Straight PC with Bracket (1-2 Pole only) 13 .250” (6.35mm) Straight PC with .465” (11.8mm) Bracket 15 .425” (10.8mm) Straight PC with .630” (16.0mm) Bracket 17 .964” (24.5mm) Straight PC with 1.150” (29.2mm) Bracket Straight PC with Reinforced Bracket (1-2 Pole only) 23 .250” (6.35mm) Straight PC with .465” (11.8mm) Bracket 25 .425” (10.8mm) Straight PC with .630” (16.0mm) Bracket 26 .750” (19.05mm) Straight PC with .953” (24.2mm) Bracket Gold Contacts with 0.4VA Rating .250” (6.35mm) Straight PC Terminals with Reinforced Bracket Rockers & Paddles Small Actuators (TX Frame) D .365” (9.27mm) Wide Rocker E .365” (9.27mm) Wide Paddle F .450” (11.43mm) Wide Rocker G .450” (11.43mm) Wide Paddle Large Actuators (TZ Frame) J .595” (15.11mm) Wide Rocker H .595” (15.11mm) Wide Paddle Rocker & Paddle Colors A Black B White C Red E Yellow F Green G Blue H Gray
41 D C
Right Angle PC with Support (1-3 Pole only) 30 .150” (3.81mm) Right Angle PC Vertical PC with Support (1-4 Pole) 41 .150” (3.81mm) Vertical PC IMPORTANT: Switches are supplied without UL & CSA marking unless specified. UL & CSA recognized only when ordered with marking on the switch. Specific models, ratings and ordering instructions are noted on the General Specifications page.
Series M Bracket PC Mount Miniature Rockers B74 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Down Center Up Down Center Up SP M2012 M2013 *M2015 M2018 *M2019 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 OPEN 2-1 SPDT DP M2022 M2023 *M2025 M2028 *M2029 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 5-6 OPEN 2-1 5-4 DPDT M2022 M2023 *M2025 M2028 *M2029 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 5-6 8-9 OPEN 2-1 5-4 8-7 3PDT M2042 M2043 *M2045 M2048 *M2049 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 5-6 8-9 11-12 OPEN 2-1 5-4 8-7 11-10 4PDT Note: Terminal numbers are not actually on the switch. * Reverse circuits available for vertical mount SP & DP upon request. POLES & CIRCUITS 1012794613 2 58 (COM) 2 5 (COM) 8 31 64 97 2 (COM) 4613 25 (COM) For 3 Throw (3-On) Connected Terminals & Schematics Pole Model Down Center Up Down Center Up SP M2024 M2026 M2027 ON (ON) ON ON ON ON ON (ON) (ON) DP M2044 M2046 M2047 ON (ON) ON ON ON ON ON (ON) (ON) 8-9 11-12 8-9 11-10 8-7 11-10 External connection must be made during field installation. The SP3T model utilizes a double pole base. External connection must be made during field installation. The DP3T model utilizes a four pole base. (out)(out) (out) (out) (out) (out) External Conn Common (in) Common (in) 4710 12 96 3 5811 (out) (out)(out) External Conn Common (in) 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 7 (out) 10 (out) 12 (out) 8 (in)2 (in) 51 1 External Connection External Connection 1 (out) 4 (out) 6 (out) 7 (out) 10 (out) 12 (out) 8 (in)2 (in) 51 1 External Connection External Connection 1 (out) 4 (out) 6 (out) 7 (out) 10 (out) 12 (out) 8 (in)2 (in) 51 1 External Connection External Connection
Series MBracket PC Mount Miniature Rockers B75 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com MOUNTING FRAMES Narrow Mounting Frame for Small Actuators with Straight PC Terminals (codes 13, 15, 17, 23, 25, & 26) or with Angle PC Terminals (codes 30 & 41) TX Small Actuators & Panel Cutouts for TX Frame (actuator details on the following pages) CONTACT MATERIALS & RATINGS Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Note: See Supplement section to find complete explanation of operating range. Gold over Silver Power Level or Logic Level 6A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range. A W G Wide Mounting Frame for Large Actuators with Straight PC Terminals (codes 13, 15, 17, 23, 25, & 26) TZ Straight PC Mounting Right Angle PC Mounting Vertical PC Mounting AT4148 AT4149 AT4150 AT4151 Large Actuators & Panel Cutouts for TZ Frame (actuator details on the following pages) (5.08) .200 (0.4) Typ .016 (8.0) .315 (1.4) Typ .055 (5.08) .200 25° (2.54) Dia .100 (4.37) .172 25° (2.54) Dia .100 (3.5) .138 (6.0) .235 (1.27) .050 (2.75) .108 25° (2.54) Dia .100 25° (3.5) .138 (2.54) Dia .100 AT4156 AT4157 (16.0) .630 (28.5) 1.122 Direction of Actuation (12.7) .500 (12.4) .490 Direction of Actuation (10.1) .398 (17.8) .701 Direction of Actuation
Series M Bracket PC Mount Miniature Rockers B76 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com TERMINALS ROCKERS & PADDLES FOR TX MOUNTING FRAMES AT4148 .365” (9.27mm) Wide RockerD BlackACap Colors Available: WhiteB RedC YellowE GreenF BlueG Material: Polyamide Finish: Matte GrayH AT4149 .365” (9.27mm) Wide PaddleE Material: Polyamide Finish: Matte .250” (6.35mm) Terminal with .465” (11.8mm) Bracket PCB footprints are on the following Typical Switch Dimension pages. 15 17 23 25 26 .750” (19.05mm) Terminal with .953” (24.2mm) Bracket .425” (10.8mm) Terminal with .630” (16.0mm) Bracket .250” (6.35mm) Terminal with .465” (11.8mm) Bracket .964” (24.5mm) Terminal with 1.150” (29.2mm) Bracket .425” (10.8mm) Terminal with .630” (16.0mm) Bracket For TX and TZ 1-2 Pole Straight PC Mount with Bracket AT4150 .450” (11.43mm) Wide RockerF Material: Polyamide Finish: Matte AT4151 .450” (11.43mm) Wide PaddleG Material: Polyamide Finish: Matte For TX and TZ 1-2 Pole Straight PC Mount with Reinforced Bracket For TX 1-3 Pole Right Angle PC Mount For TX 1-4 Pole Vertical PC Mount .150” (3.81mm) Right Angle PC30 .150” (3.81mm) Vertical PC41 (2.36) .093 (3.18) .125 (5.84) R .230 (16.36) .644 (3.5) .138(11.8) .465 (11.43) .450 (6.3) .248(8.1) .319 (11.8) .465 (9.19) .362 (3.5) .138 (7.7) .303 (11.43) .450 (2.13) .084 (3.96) .156 (8.43) R .332 (3.5) .138 (18.8) .740 (16.8) .661 (9.27) .365 (7.9) .311 (8.8) .346(6.15) .242 (3.5) .138 (13.49) .531 (16.87) .664 (9.27) .365
Series MBracket PC Mount Miniature Rockers B77 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com ROCKERS & PADDLES FOR TZ MOUNTING FRAMES OPTIONAL SNAP-IN PANEL FRAMES BlackACap Colors Available: WhiteB RedC YellowE GreenF BlueG GrayH AT4156 .595” (15.11mm) Wide RockerJ AT4157 .595” (15.11mm) Wide PaddleH (6.68) .263 (15.62) .615 (17.9) .705 (25.04) .986 (9.9) .390 (2.3) .090 (6.68) .263 (19.43) .765 (15.62) .615 (2.3) .090 (12.0) .472(12.8) .504 (15.11) .595 (11.0) .433 (23.01) .906 (6.5) .256(8.4) .331 (3.5) .138 (26.78) 1.054 (14.33) .564 (15.11) .595 (29.82) 1.174 (26.8) 1.055 (2.36) .093 (4.75) .187 (13.5) R .531 (7.3) .287 (3.5) .138 Material: Polyamide Finish: Matte Material: Polyamide Finish: Matte AT064-1 Accommodates .047” ~ .090” (1.2 ~ 2.3mm) panel thickness Material: Polyamide Finish: Matte Color: Black Mounted separately from switches Cutout Tolerances: Dimension A: Dimension B: Used with AT4148 Rocker and AT4149 Paddle Used with AT4150 Rocker and AT4151 Paddle AT064-2 Accommodates .062” ~ .125” (1.57 ~ 3.18mm) panel thickness AT065-2 Accommodates .062” ~ .125” (1.57 ~ 3.18mm) panel thickness AT065-1 Accommodates .047” ~ .090” (1.2 ~ 2.3mm) panel thickness Material: Polyamide Finish: Matte Color: Black Mounted separately from switches Cutout Tolerances: Dimension A: Dimension B: AT064–1 Enlarged Detail AT065–1 Enlarged Detail AT065–2 Enlarged Detail A B A B
Series M Bracket PC Mount Miniature Rockers B78 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com (8.0) .315 (1.17) Typ .046 (1.17) Typ .046 (12.7) .500 (4.8) .189 (3.2) Typ .126 (4.8) Typ .189 BRACKET LENGTH (1.17) Typ .046 (1.17) Typ .046 (9.1) .358 BRACKET LENGTH (4.8) .189 (4.8) Ty p .189 (6.35) Typ .250 (12.7) .500 TYPICAL SWITCH DIMENSIONS Straight PC • Bracket Straight PC • Reinforced Bracket M2012TXG13-DC M2012TXG23-DC Single Pole Single Pole Double Pole Double Pole Terminal Code: Terminal Length: Bracket Length: Terminal Code: Terminal Length: Bracket Length: 1 4 (1.6) Typ .063 (2.4) Typ .095 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 CL (1.6) Typ .063 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (4.7) Typ .185 (3.18) Typ .125 (9.53) Typ .375 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (4.7) Typ .185 (2.4) Typ .095 1 4 (3.18) Typ .125 (9.53) Typ .375 (1.8) Dia Typ .073 (1.5) Dia Typ .059 CL 25° (6.15) .242 (3.5) .138 TERMINAL LENGTH (0.5) Typ .020 (0.8) Typ .031 (4.7) Typ .185 (15.8) .622 (8.8) .346 1 2 3 Circuit Mark This Side 1 2 3 (8.8) .346 25° (6.15) .242 (3.5) .138 TERMINAL LENGTH (0.5) Typ .020 (0.8) Typ .031 (4.7) Typ .185 (19.05) .750 Circuit Mar k This Side
Series MBracket PC Mount Miniature Rockers B79 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com TYPICAL SWITCH DIMENSIONS Single Pole .150” (3.81mm) Right Angle PC M2012TXG30-DC Double Pole .150” (3.81mm) Right Angle PC M2022TXG30-DC Three Pole .150” (3.81mm) Right Angle PC M2032TXG30-DC (5.08) .200 (1.4) Typ .055 (2.85) .112 (6.4) .252 Shown in Down Position (9.27) .365 (1.27) Typ .050 (0.4) Typ .016 (3.81) .150 Pivot (6.15) .242 (4.0) .157 (8.8) .346 (12.7) .500 654 1 2 3 (12.7) .500 (4.3) .169 (0.8) Typ .031 (4.7) Typ .185 (13.0) .512 (1.8) Dia Typ .073 2 13 (4.7) Typ .185 (2.54) Typ .100 (12.7) .500 5 46 (3.81) .150 (5.41) .213 (2.85) .112 (5.08) .200 (1.4) Typ .055 Shown in Down Position Pivot (1.27) .050 (12.7) .500 (8.8) .346 (6.15) .242 (0.4) .016 (5.5) .217 (4.0) .157 (9.27) .365 12 3 (13.0) .512 (7.9) .311 (4.3) .169 (0.8) Typ .031 (4.7) Ty p .185 (4.7) Typ .185 (1.8) Dia Typ .073 123 (12.7) .500 (2.54) Typ .100 (8.8) .346 (2.85) .112 (5.08) .200 (1.4) Typ .055 Shown in Down Position Pivot (1.27) Typ .050 (3.81) Typ .150 (14.35) .565 (4.5) .177 (0.4) .016 (6.15) .242 (8.8) .346 (9.27) .365 78 9 654 12 3 (4.3) .169 (17.5) .689 (13.0) .512 (0.8) Typ .031 (4.7) Typ .185 2 13 (4.7) Typ .185 (2.54) Typ .100 (14.35) .565 (1.8) Dia Typ .073 5 46 8 79 (3.81) Typ .150
Series M Bracket PC Mount Miniature Rockers B80 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com TYPICAL SWITCH DIMENSIONS .150” (3.81mm) Vertical PC Single Pole M2012TXG41-DC .150” (3.81mm) Vertical PC Three Pole M2032TXG41-DC .150” (3.81mm) Vertical PC Four Pole M2042TXG41-DC M2022TXG41-DC .150” (3.81mm) Vertical PC Double Pole (9.27) .365 (5.08) .200 (0.4) Typ .016 25° (9.1) .360 (2.74) .108 (6.15) .242 (5.97) .235 (1.27) .050 (12.7) .500 (3.18) .125 (3.5) .138 (8.8) .346 (0.8) Typ .031 (3.81) Typ .150 Shown in Down Position (7.9) .311 (1.27) .050 (13.0) .512 (9.27) .365 (5.08) .200 (0.4) Typ .016 25° (9.1) .360 (2.74) .108 (6.15) .242 (5.97) .235 (1.27) .050 (12.7) .500 (3.18) .125 (3.5) .138 (8.8) .346 (0.8) Typ .031 (3.81) Typ .150 Shown in Down Position 4 1 (13.0) .512 (12.7) .500 (4.8) .189 (1.27) Ty p .050 (9.27) .365 (5.08) .200 (0.4) Typ .016 (2.74) .108 (6.15) .242 (5.97) .235 (1.27) .050 (14.35) .565 (3.81) Typ .150 (3.18) .125 (0.8) Typ .031 (3.5) .138 (8.8) .346 (9.1) .360 25° Shown in Down Position 4 1 (13.0) .512 (17.5) .689 (1.27) Typ .050(4.8) Typ .189 4 1 710 (13.0) .512 (1.27) Ty p .050 (4.8) Typ .189 (22.3) .878 (2.74) .108 (6.15) .242 (5.97) .235 (1.27) .050 (14.35) .565 (3.81) Typ .150 (3.18) .125 (0.8) Typ .031 (3.5) .138 (8.8) .346 (9.1) .360 25° Shown in Down Position (9.27) .365 (5.08) .200 (0.4) Typ .016 (1.8) Dia Typ .073 (4.8) Typ .189 (2.54) Typ .100 (14.35) .565 (3.81) Typ .150 71 0 (1.8) Dia Typ .073 (4.8) Typ .189 (2.54) Typ .100 (14.35) .565 (3.81) Typ .150 (2.4) Typ .094 (1.8) Dia Typ .073 (12.7) .500 (2.54) Typ .100 (3.81) Typ .150 (12.7) .500 (1.8) Dia Typ .073 (2.54) Typ .100 (3.81) Typ .150
Series MBracket PC Mount Miniature Rockers B81 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com (8.0) .315 (1.17) Typ .046 (1.17) Typ .046 BRACKET LENGTH (4.8) Typ .189 (4.8) .189 (3.2) Typ .126 (12.7) .500 (9.1) .358 (1.17) Typ .046 (1.17) Typ .046 BRACKET LENGTH (4.8) Ty p .189 (6.35) Typ .250 (4.8) .189 (12.7) .500 TYPICAL SWITCH DIMENSIONS Straight PC • Bracket Straight PC • Reinforced Bracket M2012TZG13-JC M2012TZG23-JC Single Pole Single Pole Double Pole Double Pole Terminal Code: Terminal Length: Bracket Length: Terminal Code: Terminal Length: Bracket Length: 1 4 (1.6) Typ .063 (2.4) Typ .095 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 CL (1.6) Typ .063 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (4.7) Typ .185 (3.18) Typ .125 (9.53) Typ .375 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (4.7) Typ .185 (2.4) Typ .095 1 4 (3.18) Typ .125 (9.53) Typ .375 (1.8) Dia Typ .073 (1.5) Dia Typ .059 CL 25° 1 2 3 TERMINAL LENGTH (3.5) .138 (15.8) .622 (0.6) Typ .024 (0.8) Typ .031 (4.7) Typ .185 (11.0) .433 (6.6) .260 Circuit Mark This Side (19.05) .750 1 23 TERMINAL LENGTH (3.5) .138 (0.5) Typ .020 (0.8) Typ .031 (4.7) Typ .185 (6.6) .260 25° (11.0) .433Circuit Mark This Side
Series M Bracket PC Mount Miniature Rockers B82 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com LEGENDS NKK Switches can provide custom legends for caps. Contact factory for more information. Suggested Printable Area for Cap AT4148 AT4150 Shaded areas are printable areas. Recommended Print Method: Pad Print Epoxy based ink is recommended. OFFON OFFON AT4156 OFFON (9.27) .365 (7.75) .305 (5.76) Typ .227 (6.9) Typ .272 (0.76) Typ .030 (0.76) Typ .030 (0.38) Typ .015 (9.91) .390 (3.36) Typ .132 (11.43) .450 (0.76) Typ .030 (0.76) Typ .030 (0.38) Typ .015 (4.5) Typ .177 (15.11) .595 (13.59) .535 (11.18) Typ .440 (10.03) Typ .395 (0.76) Typ .030 (0.76) Typ .030 (0.38) Typ .015
Series MFlat Frame Mount Miniature Rockers B83 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com TN TYPICAL SWITCH ORDERING EXAMPLE M20 SPDT ON-NONE-ON Circuit Contact Materials & Ratings W Silver; Rated 6A @ 125V AC & 3A @ 250V AC G Gold; Rated 0.4VA max @ 28V AC/DC max A Gold over Silver; Rated 6A @ 125V AC & 0.4V A max @ 28V AC/DC max Red .365” (9.27mm) Wide Rocker Terminals 03 .250” (6.35mm) Straight PC .272” (6.9mm) Wide Flat Frame Silver Contacts with 6-Amp Rating Rockers & Paddles Small Actuators (TN Frame) D .365” (9.27mm) Wide Rocker E .365” (9.27mm) Wide Paddle F .450” (11.43mm) Wide Rocker G .450” (11.43mm) Wide Paddle Large Actuators (TY Frame) J .595” (15.11mm) Wide Rocker H .595” (15.11mm) Wide Paddle Rocker & Paddle Colors A Black B White C Red E Yellow F Green G Blue H Gray W1 012 Circuits 8 (ON) OFF (ON) 6 (ON) ON (ON) ( ) = Momentary 3-ON circuits Mounting Frames TN .272” (6.9mm) Wide Flat Frame TY .504” (12.8mm) Wide Flat Frame D C DESCRIPTION FOR TYPICAL ORDERING EXAMPLE M2012TNW01-DC Poles IMPORTANT: Switches are supplied without UL & CSA marking unless specified. UL & CSA recognized only when ordered with marking on the switch. Specific models, ratings and ordering instructions are noted on the General Specifications page.
Series M Flat Frame Mount Miniature Rockers B84 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Down Center Up Down Center Up SP M2012 M2013 M2015 M2018 M2019 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 OPEN 2-1 SPDT DP M2022 M2023 M2025 M2028 M2029 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 5-6 OPEN 2-1 5-4 DPDT M2032 M2033 M2035 M2038 M2039 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 5-6 8-9 OPEN 2-1 5-4 8-7 3PDT M2042 M2043 M2045 M2048 M2049 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 5-6 8-9 11-12 OPEN 2-1 5-4 8-7 11-10 4PDT Note: Terminal numbers are not actually on the switch. POLES & CIRCUITS 1012794613 2 58 (COM) 2 5 (COM) 8 31 64 97 2 (COM) 4613 25 (COM) For 3 Throw (3-On) Connected Terminals & Schematics Pole Model Down Center Up Down Center Up SP M2024 M2026 M2027 ON (ON) ON ON ON ON ON (ON) (ON) DP M2044 M2046 M2047 ON (ON) ON ON ON ON ON (ON) (ON) 8-9 11-12 8-9 11-10 8-7 11-10 External connection must be made during field installation. The SP3T model utilizes a double pole base. External connection must be made during field installation. The DP3T model utilizes a four pole base. (out)(out) (out) (out) (out) (out) External Conn Common (in) Common (in) 4710 12 96 3 5811 (out) (out)(out) External Conn Common (in) 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 7 (out) 10 (out) 12 (out) 8 (in)2 (in) 51 1 External Connection External Connection 1 (out) 4 (out) 6 (out) 7 (out) 10 (out) 12 (out) 8 (in)2 (in) 51 1 External Connection External Connection 1 (out) 4 (out) 6 (out) 7 (out) 10 (out) 12 (out) 8 (in)2 (in) 51 1 External Connection External Connection
Series MFlat Frame Mount Miniature Rockers B85 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com MOUNTING FRAMES .272” (6.9mm) Wide Flat FrameTN Small Actuators & Panel Cutouts for TN Frame (actuator details on the following pages) TY Mounting hardware kit HK-1, as shown on the following page, must be ordered separately. AT4148 AT4149 AT4150 AT4151 Large Actuators & Panel Cutout for TY Frame (actuator details on the following pages) AT4156 AT4157 Mounting hardware kit HK-2, as shown on the following page, must be ordered separately. .504” (12.8mm) Wide Flat Frame (0.6) .024 (3.5) .138 (6.9) .272 (29.5) 1.161 (23.8) .937 (2.4) Dia Typ .094 (3.2) Dia Typ .126 (12.8) .504 (41.3) 1.626 (34.9) 1.374 (0.6) .024 (3.5) .138 (16.0) .630 (28.5) 1.122 (34.9) 1.374 (3.5) Dia Typ .138 (23.8) .937 (12.7) .500 (12.4) .490 (2.6) Dia Typ .102 (17.8) .701 (23.8) .937 (2.6) Dia Ty p .102(10.1) .398
Series M Flat Frame Mount Miniature Rockers B86 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com CONTACT MATERIALS & RATINGS Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Note: See Supplement section to find complete explanation of operating range. Gold over Silver Power Level or Logic Level 6A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range. A W G TERMINALS Solder Lug .250” (6.35mm) Straight PC Single Pole Double Pole Three Pole Four Pole Epoxy Seal (2.0) .079 (2.0) .079 (4.0) .157 (1.1) .043 Thk = (0.8) .031 (4.8) Typ .189 (4.7) Typ .185 (1.8) Dia Typ .073 3 6 (4.8) Typ .189 (4.7) Typ .185 (1.8) Dia Typ .073 3 6 9 12 (4.7) Typ .185 (1.8) Dia Typ .073 MOUNTING FRAMES (CONTINUED) Optional Hardware Kits for Subpanel or Face Panel Mounting Frame Panel Thickness Standoff Length Hardware Kit Number TN Frame .125” (3.175mm) .233” (5.918mm) ATHK-1 TY Frame .125” (3.175mm) .312” (7.925mm) ATHK-2 Hardware kits include: 2 stainless steel screws, 2 hex nuts, 2 lockwashers, & 2 standoffs ST ANDOFF LENGTH Face Panel Mounting Subpanel Mounting Flat frame devices may also be mounted to the face panel. Standoffs are used to recess the actuator and achieve an attractive front panel appearance. These devices are especially designed for subpanel mounting. When installed on a mounting plate behind the panel, hardware is completely concealed and the front panel retains a clean, attractive appearance. Optional Snap-in Panel Frames Further details are shown in the previous bracketed PC mount subsection. AT064-1 AT064-2 AT065-1 AT065-2 Epoxy Seal (4.8) .189 (6.35) .250 (1.17) .046 Thk = (0.8) .031 (4.7) Typ .185 (4.8) .189 (1.8) Dia Typ .073 3 6
Series MFlat Frame Mount Miniature Rockers B87 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com AT4148 .365” (9.27mm) Wide RockerD Material: Polyamide Finish: Matte AT4149 .365” (9.27mm) Wide PaddleE Material: Polyamide Finish: Matte AT4150 .450” (11.43mm) Wide RockerF Material: Polyamide Finish: Matte AT4151 .450” (11.43mm) Wide PaddleG Material: Polyamide Finish: Matte (2.36) .093 (3.18) .125 (5.84) R .230 (16.36) .644 (3.5) .138(11.8) .465 (11.43) .450 (6.3) .248(8.1) .319 (11.8) .465 (9.19) .362 (3.5) .138 (7.7) .303 (11.43) .450 (2.13) .084 (3.96) .156 (8.43) R .332 (3.5) .138 (18.8) .740 (16.8) .661 (9.27) .365 (7.9) .311 (8.8) .346(6.15) .242 (3.5) .138 (13.49) .531 (16.87) .664 (9.27) .365 ROCKERS & PADDLES BlackACap Colors Available: WhiteB RedC YellowE GreenF BlueG GrayH AT4156 .595” (15.11mm) Wide RockerJ AT4157 .595” (15.11mm) Wide PaddleH (15.11) .595 (11.0) .433 (23.01) .906 (6.5) .256(8.4) .331 (3.5) .138 (26.78) 1.054 (14.33) .564 (15.11) .595 (29.82) 1.174 (26.8) 1.055 (2.36) .093 (4.75) .187 (13.5) R .531 (7.3) .287 (3.5) .138 Material: Polyamide Finish: Matte Material: Polyamide Finish: Matte For TN Frame For TY Frame
Series M Flat Frame Mount Miniature Rockers B88 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com TYPICAL SWITCH DIMENSIONS TN Frame • Solder Lug Single Pole M2012TNW01-DC TN Frame • Solder Lug Three Pole M2032TNW01-DC TN Frame • Solder Lug Four Pole M2042TNW01-DC M2022TNW01-DC TN Frame • Solder Lug Double Pole (23.8) .937 (29.5) 1.161 (6.9) .272 (9.27) .365 (2.4) Dia Typ .094 (4.7) Typ .185 (0.8) Typ .031 (3.5) .138 (12.3) .484 25° (1.1) x (2.0) Typ .043 x. 079 (0.5) .020 (4.5) .177 (10.3) .406 (0.6) .024 (7.9) .311 (9.65) .380 Circuit Mark This Side (13.0) .512 (7.9) .311 (2.0) .079 (23.8) .937 (29.5) 1.161 (9.27) .365 (6.9) .272 (2.4) Dia Typ .094 (4.7) Typ .185 (0.8) Typ .031 (3.5) .138 (12.3) .484 25° (1.1) x (2.0) Typ .043 x. 079 (0.5) .020 (4.5) .177 (0.6) .024 (7.9) .311 (9.65) .380 Circuit Mark This Side (10.3) .406 4 1 (13.0) .512 (2.0) Typ .079 (12.7) .500 (4.8) .189 (23.8) .937 (29.5) 1.161 (9.27) .365 (6.9) .272 (2.4) Dia Typ .094 (4.7) Typ .185 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (0.5) .020 (0.6) .024 (7.9) .311 (12.3) .484 (3.5) .138 25° Circuit Mark This Side (9.65) .380 (12.4) .488 (4.5) .177 (13.0) .512 (4.8) Typ .189 (17.5) .689 (2.0) Typ .079 (23.8) .937 (29.5) 1.161 (9.27) .365 (6.9) .272 (2.4) Dia Typ .094 (4.7) Typ .185 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (0.5) .020 (0.6) .024 (7.9) .311 (12.3) .484 (3.5) .138 25° Circuit Mark This Side (9.65) .380 (12.4) .488 (4.5) .177 710 (13.0) .512 (22.3) .878 (4.8) Typ .189 (2.0) Typ .079
Series MFlat Frame Mount Miniature Rockers B89 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Toggles B RockersTouch Tilt www.nkkswitches.com TYPICAL SWITCH DIMENSIONS TY Frame • Solder Lug M2012TYW01-JC Three Pole TY Frame • Solder Lug M2032TYW01-JC Four Pole TY Frame • Solder Lug M2042TYW01-JC Single Pole Double Pole (34.9) 1.374 (41.3) 1.626 (15.11) .595 (12.8) .504 (3.2) Dia Typ .126 (14.5) .571 (3.5) .138 25° (8.4) .331 (0.6) .024 (0.5) .020 (10.0) .394 (12.1) .476 (4.5) .177 (0.8) Typ .031 (4.7) Typ .185 (1.1) x (2.0) Typ .043 x .079 Circuit Mark This Side 4 1 (13.0) .512 (4.8) Ty p .189 (17.5) .689 (2.0) Typ .079 710 (13.0) .512 (22.3) .878 (4.8) Typ .189 (2.0) Typ .079(14.5) .571 (3.5) .138 25° (8.4) .331 (0.6) .024 (0.5) .020 (10.0) .394 (12.1) .476 (4.5) .177 (0.8) Typ .031 (4.7) Typ .185 (1.1) x (2.0) Typ .043 x .079 Circuit Mark This Side (34.9) 1.374 (41.3) 1.626 (15.11) .595 (12.8) .504 (3.2) Dia Typ .126 (34.9) 1.374 (41.3) 1.626 (15.11) .595 (12.8) .504 (3.2) Dia Typ .126 25° (0.8) Typ .031 (4.7) Typ .185 (10.0) .394 (10.0) .394 (4.5) .177 (0.5) .020 (0.6) .024 (8.4) .331 (14.5) .571 (3.5) .138 (1.1) x (2.0) Typ .043 x .079 Circuit Mark This Side (7.9) .311 (2.0) .079 (13.0) .512 4 1 (4.8) .189 (2.0) Typ .079 (13.0) .512 Double pole has barrier between terminals.
Series M Flat Frame Mount Miniature Rockers B90 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable B RockersTouch Tilt Toggles www.nkkswitches.com LEGENDS NKK Switches can provide custom legends for caps. Contact factory for more information. Suggested Printable Area for Caps AT4148 AT4150 Shaded areas are printable areas. Recommended Print Method: Pad Print Epoxy based ink is recommended. OFFON OFFON AT4156 OFFON (9.27) .365 (7.75) .305 (5.76) Typ .227 (6.9) Typ .272 (0.76) Typ .030 (0.76) Typ .030 (0.38) Typ .015 (9.91) .390 (3.36) Typ .132 (11.43) .450 (0.76) Typ .030 (0.76) Typ .030 (0.38) Typ .015 (4.5) Typ .177 (15.11) .595 (13.59) .535 (11.18) Typ .440 (10.03) Typ .395 (0.76) Typ .030 (0.76) Typ .030 (0.38) Typ .015