M2000-109118

M2430821F AMPHENOL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 32

Technical content

D- Sub-01 Rev. 10 / 10

ntroduction & Page Contents Introduction Amphenol M2000 Series D Sub Connectors are MIL Qualified & listed in QPL & meets the requirement of MIL-DTL-24308. M2000 Series D Sub Connectors are subminiature rack & panel type with polarized shell & having pin/socket machined contacts which provide high reliability & density for the connectors. They are used in variety of applications due to it’s versatile design where weight & dimensions are constraint factor. Applications: Military Aerospace Industrial Information System Communication System Page Introduction 1 Technical Specification 2 Ordering Information 2 5QPL Approved Part List 3-11 Receptacle Plug Assembly Exploded View 11 15-16 Insert Arrangement For Standard D Sub Connector 12 Content PCB Layout For Standard D Sub Connector PCB Layout For High Density D Sub Connector Receptacle & Plug Connector D Sub Tooling Solder Type Standard D Sub Connector (Non Environmental) Contact Information for D Sub 17-18 19-20 Special Products Standard D Sub Grommet Type Connector 23 Straight PC Tail D Sub Connector 24 Standard D Sub Right Angle PC Tail Connector 25 Standard D Sub Right Angle PC Tail Contact with Extra Length Connector 26 Dust Cover High Density D Sub Right Angle PC Tail Connector I

Cadmium, Nickel, Gold Gold Over Nickel 7.5A Max

1000 Vrms

5000 m Ohm 7.3m Ohm 5N Max

500 Cycles

• 55 Deg C to + 125 Deg C

48 Hrs

10 Days

Cadmium, Nickel, Gold Gold Over Nickel 7.5A Max

5000 m Ohm 7.3m Ohm 5N Max

• 55 Deg C to + 125 Deg C

Ordering Information

Connector Class (Refer Table 1) A M 2000 / 2 - XXX Connector Type Specification Sheet Number (Class) Military Designation Manufacturers Logo Connector Type 2: Receptacle Connector with Polarized Shell & Socket Crimp contact. 4: Plug Connector with Polarized Shell & Pin Crimp Contact. 6: Receptacle Connector with Polarized Shell with Socket Crimp Contact (Non-Magnetic) 8: Plug Connector with Polarized shell & Pin Crimp Contact (Non-Magnetic) T

pproved Part List QPL-Table 1 Sr. No. Type I R Tool Military Designation Manufacturers Designation Position Crimp Contact Shell Finish M24308/2-1F M24308/2-2F M24308/2-3F M24308/2-4F M24308/2-5F M24308/2-6F M24308/2-7F M24308/2-8F M24308/2-9F M24308/2-10F M24308/2-281F M24308/2-282F M24308/2-283F M24308/2-284F M24308/2-285F M24308/2-11F M24308/2-12F M24308/2-13F M24308/2-14F M24308/2-15F M24308/2-17F M24308/2-18F M24308/2-19F M24308/2-20F M24308/2-21F M24308/2-286F M24308/2-287F M24308/2-288F M24308/2-289F M2000/2-1F M2000/2-2F M2000/2-3F M2000/2-4F M2000/2-5F M2000/2-6F M2000/2-7F M2000/2-8F M2000/2-9F M2000/2-10F M2000/2-281F M2000/2-282F M2000/2-283F M2000/2-284F M2000/2-285F M2000/2-11F M2000/2-12F M2000/2-13F M2000/2-14F M2000/2-15F M2000/2-17F M2000/2-18F M2000/2-19F M2000/2-20F M2000/2-21F M2000/2-286F M2000/2-287F M2000/2-288F M2000/2-289F Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density Socket Socket Socket Socket Socket Socket Socket Socket Socket Socket N N N N N Socket Socket Socket Socket Socket Socket Socket Socket Socket Socket N N N N N N N N N Y Y Y Y Y N N N N N N N N N N Y Y Y Y Y N N N N Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivation A

Sr. No. Type I R Tool Manufacturers Designation Position Crimp Contact Shell Finish M24308/2-290F M24308/2-516 M24308/2-517 M24308/2-518 M24308/2-519 M24308/2-520 M24308/2-521 M24308/2-522 M24308/2-523 M24308/2-524 M24308/2-525 M24308/2-560 M24308/2-561 M24308/2-562 M24308/2-563 M24308/2-564 M24308/2-526 M24308/2-527 M24308/2-528 M24308/2-529 M24308/2-530 M24308/2-532 M24308/2-533 M24308/2-534 M24308/2-535 M24308/2-536 M24308/2-565 M24308/2-566 M24308/2-567 M2000/2-290F M2000/2-516 M2000/2-517 M2000/2-518 M2000/2-519 M2000/2-520 M2000/2-521 M2000/2-522 M2000/2-523 M2000/2-524 M2000/2-525 M2000/2-560 M2000/2-561 M2000/2-562 M2000/2-563 M2000/2-564 M2000/2-526 M2000/2-527 M2000/2-528 M2000/2-529 M2000/2-530 M2000/2-532 M2000/2-533 M2000/2-534 M2000/2-535 M2000/2-536 M2000/2-565 M2000/2-556 M2000/2-5567 Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density N Socket Socket Socket Socket Socket Socket Socket Socket Socket Socket N N N N N Socket Socket Socket Socket Socket Socket Socket Socket Socket Socket N N N N N N N N N Y Y Y Y Y N N N N N N N N N N Y Y Y Y Y N N N Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Cadmium YP Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivation Military Designation A

Sr. No. Type I R Tool Manufacturers Designation Position Crimp Contact Shell Finish M24308/2-568 M24308/2-569 M24308/4-1F M24308/4-2F M24308/4-3F M24308/4-4F M24308/4-5F M24308/4-6F M24308/4-7F M24308/4-8F M24308/4-9F M24308/4-10F M24308/4-259F M24308/4-260F M24308/4-261F M24308/4-262F M24308/4-263F M24308/4-11F M24308/4-12F M24308/4-13F M24308/4-14F M24308/4-15F M24308/4-17F M24308/4-18F M24308/4-19F M24308/4-20F M24308/4-21F M24308/4-264F M24308/4-265F M2000/2-568 M2000/2-569 M2000/4-1F M2000/4-2F M2000/4-3F M2000/4-4F M2000/4-5F M2000/4-6F M2000/4-7F M2000/4-8F M2000/4-9F M2000/4-10F M2000/4-259F M2000/4-260F M2000/4-261F M2000/4-262F M2000/4-263F M2000/4-11F M2000/4-12F M2000/4-13F M2000/4-14F M2000/4-15F M2000/4-17F M2000/4-18F M2000/4-19F M2000/4-20F M2000/4-21F M2000/4-264F M2000/4-265F High Density High Density Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density N N Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin N N N N N Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin N N N N N N N Y Y Y Y Y N N N N N N N N N N Y Y Y Y Y N N N N Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Nickel Nickel Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivation Military Designation A

Sr. No. Type I R Tool Manufacturers Designation Position Crimp Contact Shell Finish 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 M24308/4-266F M24308/4-267F M24308/4-268F M24308/4-335 M24308/4-336 M24308/4-337 M24308/4-338 M24308/4-339 M24308/4-340 M24308/4-341. M24308/4-342 M24308/4-343 M24308/4-344 M24308/4-357 M24308/4-358 M24308/4-359 M24308/4-360 M24308/4-361 M24308/4-345 M24308/4-346 M24308/4-347 M24308/4-348 M24308/4-349 M24308/4-351 M24308/4-352 M24308/4-353 M24308/4-354 M24308/4-355 M24308/4-362 M2000/4-266F M2000/4-267F M2000/4-268F M2000/4-335 M2000/4-336 M2000/4-337 M2000/4-338 M2000/4-339 M2000/4-340 M2000/4-341 M2000/4-342 M2000/4-343 M2000/4-344 M2000/4-357 M2000/4-358 M2000/4-359 M2000/4-360 M2000/4-361 M2000/4-345 M2000/4-346 M2000/4-347 M2000/4-348 M2000/4-349 M2000/4-351 M2000/4-352 M2000/4-353 M2000/4-354 M2000/4-355 M2000/4-362 High Density High Density High Density Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density N N N Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin N N N N N Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin N N N N N N N N N Y Y Y Y Y N N N N N N N N N N Y Y Y Y Y N Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Cadmium YP Cadmium YP Cadmium YP Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivation Military Designation Approved Part List QPL

Sr. No. Type I R Tool Manufacturers Designation Position Crimp Contact Shell Finish 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 M24308/4-363 M24308/4-364 M24308/4-365 M24308/4-366 M24308/6-1F M24308/6-2F M24308/6-3F M24308/6-4F M24308/6-5F M24308/6-6F M24308/6-7F M24308/6-8F M24308/6-9F M24308/6-10F M24308/6-281F M24308/6-282F M24308/6-283F M24308/6-284F M24308/6-285F M24308/6-11F M24308/6-12F M24308/6-13F M24308/6-14F M24308/6-15F M24308/6-17F M24308/6-18F M24308/6-19F M24308/6-20F M24308/6-21F M2000/4-363 M2000/4-364 M2000/4-365 M2000/4-366 M2000/6-1F M2000/6-2F M2000/6-3F M2000/6-4F M2000/6-5F M2000/6-6F M2000/6-7F M2000/6-8F M2000/6-9F M2000/6-10F M2000/6-281F M2000/6-282F M2000/6-283F M2000/6-284F M2000/6-285F M2000/6-11F M2000/6-12F M2000/6-13F M2000/6-14F M2000/6-15F M2000/6-17F M2000/6-18F M2000/6-19F M2000/6-20F M2000/6-21F High Density High Density High Density High Density Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard High Density High Density High Density High Density High Density High Density High Density High Density High Density High Density N N N N Socket Socket Socket Socket Socket Socket Socket Socket Socket Socket N N N N N Socket Socket Socket Socket Socket Socket Socket Socket Socket Socket N N N N N N N N N Y Y Y Y Y N N N N N N N N N N Y Y Y Y Y Steel Steel Steel Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Nickel Nickel Nickel Nickel Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivation Military Designation Approved Part List QPL

Sr. No. Type I R Tool Manufacturers Designation Position Crimp Contact Shell Finish 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 M24308/6-286F M24308/6-287F M24308/6-288F M24308/6-289F M24308/6-290F M24308/6-502 M24308/6-503 M24308/6-504 M24308/6-505 M24308/6-506 M24308/6-507 M24308/6-508 M24308/6-509 M24308/6-510 M24308/6-511 M24308/6-540 M24308/6-541 M24308/6-542 M24308/6-543 M24308/6-544 M24308/6-512 M24308/6-513 M24308/6-514 M24308/6-515 M24308/6-516 M24308/6-518 M24308/6-519 M24308/6-520 M24308/6-521 M2000/6-286F M2000/6-287F M2000/6-288F M2000/6-289F M2000/6-290F M2000/6-502 M2000/6-503 M2000/6-504 M2000/6-505 M2000/6-506 M2000/6-507 M2000/6-508 M2000/6-509 M2000/6-510 M2000/6-511 M2000/6-540 M2000/6-541 M2000/6-542 M2000/6-543 M2000/6-544 M2000/6-512 M2000/6-513 M2000/6-514 M2000/6-515 M2000/6-516 M2000/6-518 M2000/6-519 M2000/6-520 M2000/6-521 High Density High Density High Density High Density High Density Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard High Density High Density High Density High Density High Density High Density High Density High Density High Density N N N N N Socket Socket Socket Socket Socket Socket Socket Socket Socket Socket N N N N N Socket Socket Socket Socket Socket Socket Socket Socket Socket N N N N N N N N N N Y Y Y Y Y N N N N N N N N N N Y Y Y Y Steel Steel Steel Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivation Military Designation Approved Part List QPL

Sr. No. Type I R Tool Manufacturers Designation Position Crimp Contact Shell Finish 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 M24308/6-522 M24308/6-545 M24308/6-546 M24308/6-547 M24308/6-548 M24308/6-549 M24308/8-1F M24308/8-2F M24308/8-3F M24308/8-4F M24308/8-5F M24308/8-6F M24308/8-7F M24308/8-8F M24308/8-9F M24308/8-10F M24308/8-259F M24308/8-260F M24308/8-261F M24308/8-262F M24308/8-263F M24308/8-11F M24308/8-12F M24308/8-13F M24308/8-14F M24308/8-15F M24308/8-17F M24308/8-18F M24308/8-19F M2000/6-522 M2000/6-545 M2000/6-546 M2000/6-547 M2000/6-548 M2000/6-549 M2000/8-1F M2000/8-2F M2000/8-3F M2000/8-4F M2000/8-5F M2000/8-6F M2000/8-7F M2000/8-8F M2000/8-9F M2000/8-10F M2000/8-259F M2000/8-260F M2000/8-261F M2000/8-262F M2000/8-263F M2000/8-11F M2000/8-12F M2000/8-13F M2000/8-14F M2000/8-15F M2000/8-17F M2000/8-18F M2000/8-19F High Density High Density High Density High Density High Density High Density Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard High Density High Density High Density High Density High Density High Density High Density High Density Socket N N N N N Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin N N N N N Pin Pin Pin Pin Pin Pin Pin Pin Y N N N N N N N N N N Y Y Y Y Y N N N N N N N N N N Y Y Y Steel Steel Steel Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Gold Gold Gold Gold Gold Gold Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivation Military Designation Approved Part List QPL

Sr. No. Type I R Tool Manufacturers Designation Position Crimp Contact Shell Finish 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 M24308/8-20F M24308/8-21F M24308/8-264F M24308/8-265F M24308/8-266F M24308/8-267F M24308/8-268F M24308/8-335 M24308/8-336 M24308/8-337 M24308/8-338 M24308/8-339 M24308/8-340 M24308/8-341 M24308/8-342 M24308/8-343 M24308/8-344 M24308/8-357 M24308/8-358 M24308/8-359 M24308/8-360 M24308/8-361 M24308/8-345 M24308/8-346 M24308/8-347 M24308/8-348 M24308/8-349 M24308/8-351 M24308/8-352 M2000/8-20F M2000/8-21F M2000/8-264 M2000/8-265 M2000/8-266 M2000/8-267 M2000/8-268 M2000/8-335 M2000/8-336 M2000/8-337 M2000/8-338 M2000/8-339 M2000/8-340 M2000/8-341 M2000/8-342 M2000/8-343 M2000/8-344 M2000/8-357 M2000/8-358 M2000/8-359 M2000/8-360 M2000/8-361 M2000/8-345 M2000/8-346 M2000/8-347 M2000/8-348 M2000/8-349 M2000/8-351 M2000/8-352 High Density High Density High Density High Density High Density High Density High Density Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard High Density High Density High Density High Density High Density High Density High Density Pin Pin N N N N N Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin N N N N N Pin Pin Pin Pin Pin Pin Pin Y Y N N N N N N N N N N Y Y Y Y Y N N N N N N N N N N Y Y Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Cadmium YP Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivation Military Designation Approved Part List QPL

Sr. No. Type I R Tool Manufacturers Designation Position Crimp Contact Shell Finish 233 234 235 236 237 238 239 240 M24308/8-353 M24308/8-354 M24308/8-355 M24308/8-362 M24308/8-363 M24308/8-364 M24308/8-365 M24308/8-366 M2000/8-353 M2000/8-354 M2000/8-355 M2000/8-362 M2000/8-363 M2000/8-364 M2000/8-365 M2000/8-366 High Density High Density High Density High Density High Density High Density High Density High Density Pin Pin Pin N N N N N Y Y Y N N N N N Brass Brass Brass Brass Brass Brass Brass Brass Gold Gold Gold Gold Gold Gold Gold Gold N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivation Receptacle Assembly Exploded View Plug Assembly Exploded View REAR SHELL FRONT SHELL FRONT INSERT REAR INSERT RETENTION CLIP SOCKET CONTACT FRONT SHELL FRONT INSERT REAR INSERT RETENTION CLIP PIN CONTACT REAR SHELL Military Designation Approved Part List QPL

Insert Arrangement for Standard D Sub Connectors Insert Arrangement for High Density D Sub Connectors

2.842.84 2.77 61.09 44.32 50 positions 3.052 0 1.020 1.421.42 2.77 49.86 63.5 3.05 37 positions 2 0 1.020 1.421.42 2.77 47.04 33.24 25 positions 3.052 0 1.020 1.421.42 2.77 19.39 33.32 15 positions 3.052 0 1.020 24.99 11.08 1.421.42 2.77 9 positions 3.052 0 1.020 ecommended PCB Layout for Standard D Sub Connectors Mount Connector With Mating Face Positioned To Direction Of Arrow R

ecommended PCB layout for High Density Connectors 1.C - 00.89 HOLE FOR CONTACT TERMINATION POSITION 2. MOUNT CONNECTOR WITH MATING FACE POSITIONED TO DIRECTION OF ARROW R

eceptacle Connector With Polarized Shell & Socket Crimp Contact Plug Connector With Polarized Shell & Pin Crimp Contact R

eceptacle Connector With Polarized Shell & Socket Crimp Contact-High Density Plug Connector With Polarized Shell & Pin Crimp Contact-High Density R

ontact Information for Standard D Sub Contact Information For High Density D-Sub Crimp contacts can be supplied in kit with connector or ordered separately. Crimp contacts can be supplied in kit with connector or ordered separately. CRIMP CONTACTS Closed crimp barrel Colour Code Colour Code 0.040 (1,02) Stainless Steel Shroud Material - Copper Alloy. Plating - Gold flash over nickel or 0.000050 inch (1,25 ) gold over copper for military specification contacts. Colour Code - ORANGE / BLUE / GREY for military specification contacts Material - Brass Plating - Gold flash over nickel or 0.000050 inch (1,25 ) gold over copper for military specification contacts. Colour Code - ORANGE / BLUE / WHITE for military specification contacts FEMALE CONTACT ("CLOSED ENTRY") DESIGN) MALE CONTACT B B C C0.170 (4,32) 0.170 (4,32) A A PART NO. PART NO. M2000-107687 M2000-107688 M2000-109979 M2000-109980 *M39029/63-368 *M39029/64-369 20/22/24 20/22/24 26/28/30 26/28/30 20/22/24 0.538 0.550 0.538 0.550 0.538 0.550 A AB BC C 0.027 0.0270.066 0.066 (0,5/0,3/0,25) (13,67) (13,97) (13,67) (13,97) (13,67) (13,97) WIRE SIZE2 (AWG (MM ) WIRE SIZE2 (AWG (MM ) 20/22/24 (0,5/0,3/0,25) 0.044 0.066 (1,12) (1,68) 0.044 0.066 (1,12) (1,68) 0.044 0.066 (1,12) (1,68) 0.044 0.066 (1,12) (1,68) CRIMP CONTACTS Closed crimp barrel Material - Copper Alloy. Plating - Gold flash over nickel or 0.000050 inch (1,25 ) gold over copper for military specification contacts. Colour Code - ORANGE/GREEN/YELLOW for military specification contacts Material - Brass Plating - Gold flash over nickel or 0.000050 inch (1,25 ) gold over copper for military specification contacts. Colour Code - ORANGE / BLUE / BLACK for military specification contacts 0.030 (1,76) Colour Code Colour Code A A Stainless Steel Shroud C B B C 0.150 (3,81) 0.150 (3,81) PART NO. PART NO. M2000-107294 M2000-105794 *M39029/57-354 *M39029/58-360 0.518 0.531 0.518 0.531 A AB BC C (13,16) (13,49) (13,16) (13,49) WIRE SIZE2 (AWG (MM ) WIRE SIZE2 (AWG (MM ) 22/24/26/28 22/24/26/28 0.035 0.0350.047 0.047 0.035 0.0350.047 0.047 C

rimping Information For Standard / High Density Series Crimp Contacts Strands visible beyond insulation support Strands not visible through inspection hole Crimp indents too close to inspection hole Stripped wires compressed for improved conduction Cross section of correctly crimped contact Crimp to meet recommended tensile strength For all tools : - Strands to be visible through the inspection hole - Strands not to be visible beyond the insulation support - Check for peeled gold and bent contact Amphenol recommended tools for Standard / High Density Series Contact Wire insulation Typ. Correctly crimped contact 8 crimp indents C

Insertion/Removal Tool Metalic Miniature step adjustable tool (M22520/2-01) Part No. M2000-CRT This miniature 8 step adjustable hand crimping tool produces an 8 indent crimp configuration and will crimp wire sizes 18 AWG (1.0mm ) through 32 AWG (0.3mm ) To crimp wire size 18 AWG (1.0mm ), order contact positioner 2 2 K13-1. To crimp wire size AWG (0.5mm ) through 30 AWG (0.05mm ) order contact positioner K- 13-1. Each positioner is equipped with a data plate which gives the correct crimp-depth setting for each wire size and must be used with M22520/2-01 tool frame for best results when crimping M2000 (M24308) Series contacts. One end of this tool is used to insert contacts into M2000 (M24308) Series connectors. The other end is used to extract contacts. This is accomplished by sliding the extraction tip down the wire into the connector until it bottoms against the contacts. A slight rotation while pushing will release the contacts, which are then extracted by simultaneously pulling on the wire. MS1969/1-02 (M2000-107689) S

This miniature step adjustable hand crimping tool produces an 8 indent crimp configuration and will crimp wire sizes 20 AWG (0.5mm ) through 32 AWG (0.3mm ) To crimp female contacts, order contact positioner K41. To crimp male contacts, order contact positioner K42. Each positioner is equipped with a data plate which gives the correct crimp-depth setting for each wire size and must be used with M22520/2-01 tool frame for best results when crimping M2000 (M24308) Series contacts. Miniature step adjustable tool (M22520/2-01) Part No. M2000-CRT One end of this tool is used to insert contacts into M2000 (M24308) Series connectors. The other end is used to extract contacts. This is accomplished by sliding the extraction tip down the wire into the connector until it bottoms against the contacts. A slight rotation while pushing will release the contacts, which are then extracted by simultaneously pulling on the wire. Insertion/Removal Tool (MS1969/1-02) (M2000-105786) H

rdering information For Solder Type Standard D-Sub Connector (Non Environmental) A M2000/ XX X X X Special Option (Nil for standard version) Finish Shell Size Connector Type Series Manufacturers Logo Special Option : 1-9 pin 2-15 pin 3-25 pin 4-37 pin 5-50 pin Series: M2000 Connector Type : Shell Size : Finish : 1 - Receptacle Connector with Solder Type Contact ( Fixed Contacts) 3 - Plug Connector with Solder Type Contact ( Fixed Contacts) L- Launch vehicle application F- Cadmium plate with yellow passivation, Z - Zinc Plated, N - Nickel Plated, T - Tin Plated Receptacle Connector With Solder Contact Plug Connector With Solder Contact K K O

SHELLSr. NO. SIZE \A' ± 0.13 ± 0.13 \B' ± 0.13 \C' ± 0.38 \D' ± 0.25 \E' ± 0.38 \F' ± 0.25 \G' 16.33 24.66 38.38 54.84 52.43 10.74 7.90 7.90 7.90 7.90 61.11 63.50 47.04 33.32 24.99 66.93 69.32 53.04 39.14 30.81 55.32 57.71 41.30 27.51 19.28 15.37 12.55 12.55 12.55 12.55 13.56 10.72 10.72 10.72 10.72 CONNECTOR NO. A M2000/2-1GF A M2000/2-2GF A M2000/2-3GF A M2000/2-4GF A M2000/2-5GF rdering Information For Standard D Sub Grommet Type Connector (Crimp Type Contact) Special Option : 1-9 pin 2-15 pin 3-25 pin 4-37 pin 5-50 pin Series: M2000 Connector Type : Shell Size : Finish : 4 - Plug Connector with Pin Contact Crimp Type, Rear Release, Rear Removable 2 - Socket Connector with Socket Contact Crimp Type, Rear Release, Rear Removable L- Launch vehicle application F-Cadmium plate with yellow passivation Z - Zinc Plated, N - Nickel Plated, T - Tin Plated Plug Connector With Pin Contact (with Grommet) - Rear Removable G- Silicon Elastomer GrommetGrommet Type : Special Option (Nil for standard version) Plating Finish Grommet Type Shell Size Connector Type Series Manufacturers Logo M2000/ X X X X XA 1.78 MAX. STD-THROUGH HOLE. 1.24 MAX. ø 3.05±0.13 MAX. MAX. 9.53\J' \H' \G' \F' 15.18 \K' \C' \D' (2 HOLES) ø 3.05±0.13 \B' \A' 30.81 39.14 53.04 69.32 66.93 ± 0.38 61.1111.2052.8155 55.42 38.96 25.25 SIZE SHELLSr. NO. \A' 16.92 ± 0.13 33.32 47.04 63.508.36 8.36 8.36 24.99 \C' ± 0.13 \B' ± 0.13 8.36 \D' ± 0.15 10.72 10.72 10.72 10.72 ± 0.25 57.71 27.51 41.30 12.55 12.55 12.55 \E' 19.28 ± 0.25 \F' 12.55 ± 0.38 10.72 10.72 10.82 5.84 5.97 5.97 10.72 \H' ± 0.25 \G' \J' 5.97 0.99 0.76 0.76 \K' 0.76 ± 0.25 CONNECTOR NO. A M2000/4-1GF A M2000/4-2GF A M2000/4-3GF A M2000/4-4GF A M2000/4-5GF Receptacle Connector With Socket Contact (with Grommet)-Rear Removable 10.90±0.25 0.76±0.25 9.53 6.17±0.13 \F' \S\ MAX. STD-THROUGH HOLE. 1.24 MAX. 1.78 MAX. ø 3.05±0.13\A' \C' \D' \B' (2 HOLES) ø 3.05±0.13 \E' 15.18MAX. \`E' O

Special Option (Nil for standard version) Finish Shell Size Connector Type Series Manufacturers Logo rdering Information For D Sub Connector (Straight PC Tail Type) Special Option : 1-9 pin with Straight PC Tail Pin Contact (Fixed type) 2-15 pin with Straight PC Tail Pin Contact( Fixed type) 3-25 pin with Straight PC Tail Pin Contact ( Fixed type) 4-37 pin with Straight PC Tail Pin Contact ( Fixed type) 5-50 pin with Straight PC Tail Pin Contact ( Fixed type) Series: M2000 Connector Type : Shell Size : 24 - Plug Connector 23 - Socket Connector L- Launch vehicle application Finish : F - Cadmium plate with yellow passivation Z - Zinc Plated, N - Nickel Plated, T - Tin Plated Plug Connector With Straight PC Tail Pin Contact Receptacle Connector With Straight PC Tail Socket Contact K K O

rdering information For Standard D Sub Connector (Right Angle PC Tail Contact) Series: M2000 Connector Type : A M2000/ XX XX X L 2.84 0.99 0.76 10.82 10.72 3.96 57.71 55.32 19.28 27.51 29.59 ±0.10±0.25 M ±0.25 N P ±0.20±0.25 S X ±0.25 H 15.09 12.29 ± 0.13 61.11 63.50 47.04 33.33 24.99 39.14 53.04 69.32 66.93505 253 374 152 52.81 55.42 38.96 25.25 ±0.38 SHELL SIZE 91 30.81 A ±0.13 16.92 B C 15.37 12.55 11.20 8.36 12.88 10.03 DIMENSIONS ±0.38±0.38 D E ±0.25 G 6.04/5.82 5.99/5.68 7.19 ±0.25 J KSr. NO. CONNECTOR NO. A M2000/24-31F A M2000/24-32F A M2000/24-33F A M2000/24-34F A M2000/24-35F Special Option : 31 - 9 Pin with right angle PC Tail contact with 3.96 mm PC Tail length from Mounting Bracket 32 - 15 Pin with right angle PC Tail contact with 3.96 mm PC Tail length from Mounting Bracket 33 - 25 Pin with right angle PC Tail contact with 3.96 mm PC Tail length from Mounting Bracket 34 - 37 Pin with right angle PC Tail contact with 3.96 mm PC Tail length from Mounting Bracket 35 - 50 Pin with right angle PC Tail contact with 3.96 mm PC Tail length from Mounting Bracket Shell Size : 24 - Right angle Plug Connector with PC Tail Contact 23 - Right angle Receptacle Connector with PC Tail Contact L- Launch vehicle application Finish : F - Cadmium plate with yellow passivation Z - Zinc Plated, N - Nickel Plated, T - Tin Plated Special Option (Nil for standard version) Finish Shell Size Connector Type Series Manufacturers Logo Plug Connector With Pin Contact, Right Angle PC Tail Contact S STD-THROUGH HOLE. ø 3.05±0.13 1.24 MAX. 1.78 MAX. (50 PIN) 10.03 J G E B C D A ø 0.76±0.02 G (09 TO 37 PIN) N K P X M J H 66.93 69.32 52.43 54.844 5 61.11 10.74 63.50 15.37 12.88 15.09 A M2000/23-34F A M2000/23-35F 53.04 39.14 38.38 24.66 30.81 ±0.38SIZE SHELL A 16.33 ±0.13 B 47.04 33.33 7.90 12.55 10.03 DIMENSIONS 24.99 ± 0.13 C ±0.38 D ±0.38 E ±0.25 G 12.29 7.19 6.30\\6.04 ±0.25 H ±0.25 J K A M2000/23-31F A M2000/23-32F A M2000/23-33F Sr. NO. CONNECTOR NO. 0.99 0.76 10.90 55.32 57.71 2.84 29.59 27.51 19.28 3.96 ±0.25 M ±0.25 N ±0.10 P ±0.25 S ±0.20 X S STD-THROUGH HOLE. ø 3.05±0.13 1.24 MAX. 1.78 MAX. E B C D A ø 0.76±0.02 (50 PIN) 10.03 J G G X (09 TO 37 PIN) N K P M J H Receptacle Connector With Socket Contact, Right Angle PC Tail Contact O

(Nil for standard version) Plating Finish Shell Size Connector Type Series Manufacturers Logo rdering Information For Standard D Sub Connector (Right Angle PC Tail Contact With Extra PC Tail Length) Special Option : 49 - 9PinRight angle PC Tail contact with 4.78mm PC Tail length from Mounting Bracket 50 - 15PinRight angle PC Tail contact with 4.78mm PC Tail length from Mounting Bracket 51 - 25PinRight angle PC Tail contact with 4.78mm PC Tail length from Mounting Bracket 52 - 37PinRight angle PC Tail contact with 4.78mm PC Tail length from Mounting Bracket 53 - 50PinRight angle PC Tail contact with 4.78mm PC Tail length from Mounting Bracket Shell Size : 24- Right angle type Plug Connectors with PC Tail length 23- Right angle Receptacle Connector with PC Tail Contact L- Launch vehicle application Finish : F - Cadmium plate with yellow passivation Z - Zinc Plated, N - Nickel Plated, T - Tin Plated Series: M2000 Connector Type : Receptacle Connector With Socket Contact, Right Angle PC Tail Contact S STD-THROUGH HOLE ø 3.05±0.13 1.24 MAX. 1.78 MAX. E B C D A ø 0.76±0.02 (50 PIN) 10.03 J G G (09 TO 37 PIN) N K P M J H 66.93 69.32 53.04 39.14 52.43 38.38 54.84 24.66 30.81 ±0.38SIZE SHELL A 16.33 ±0.13 B 61.11 10.74 47.04 63.50 33.33 7.90 15.37 12.88 12.55 10.03 DIMENSIONS 24.99 ± 0.13 C ±0.38 D ±0.38 E ±0.25 G 15.09 12.29 7.19 6.30\\6.04 ±0.25 H ±0.25 J K A M2000/23-49F A M2000/23-50F A M2000/23-51F A M2000/23-52F A M2000/23-53F Sr. NO. CONNECTOR NO. 0.99 0.76 10.90 55.32 57.71 2.84 29.59 27.51 19.28 ±0.25 M ±0.25 N ±0.10 P ±0.25 S ±0.20 4.78 Plug Connector With Pin Contact, Right Angle PC Tail contact (50 PIN) 10.03 J G G (09 TO 37 PIN) N K P M J H S STD-THROUGH HOLE. ø 3.05±0.13 1.24 MAX. 1.78 MAX. E B C D A ø 0.76±0.02 2.84 0.99 0.76 10.82 10.72 57.71 55.32 19.28 27.51 29.59 4.78 ±0.10±0.25 M ±0.25 N P ±0.25 S ±0.20 ±0.25 H 15.09 12.29 ± 0.13 61.11 63.50 47.04 33.33 24.99 39.14 53.04 69.32 66.93505 253 374 152 52.81 55.42 38.96 25.25 ±0.38 SHELL SIZE 91 30.81 A ±0.13 16.92 B C 15.37 12.55 11.20 8.36 12.88 10.03 DIMENSIONS ±0.38±0.38 D E ±0.25 G 6.04\\5.82 5.99\\5.68 7.19 ±0.25 J KSr. NO. CONNECTOR NO. A M2000/24-49F A M200/24-50F A M2000/24-51F A M2000/24-52F A M2000/24-53F O

rdering Information For High Density D Sub Connector (Right Angle PC Tail Contact) Special Option : 5 -77, 78 Pin Right angle Connector with 3.48 PC Tail length 5 -SP, 78 Pin Right angle Connector with 5.20 PC Tail length Series: M2000 Connector Type : Shell Size : Finish : 24 - Right Angle Plug connector with PC Tail Contact & plastic mounting bracket 23 - Right Angle Receptacle connector with PC Tail Contact & plastic mounting bracket L- Launch vehicle application F- Cadmium plate with yellow passivation, Z - Zinc Plated, N - Nickel Plated, T - Tin Plated Plug Connector With Pin Contact A M2000/ XX XX X X Special Option (Nil for standard version) Finish Shell Size (77/SP) Connector Type Series Manufacturers Logo Receptacle Connector With Socket Contact O

MATERIAL: PVC per UL 94V-0 ‘E’ ‘F’ ‘D’ R. 0.50 ‘A’ ‘C’ ‘G’ THICK R. 2.600 +0.0 1 17.70 39.70 56.20 53.60 26.0 Sr. NO. \A' 9.10 9.10 11.90 9.10 9.10 8.1 8.2 7.6 8.1 7.6 7.7 12.0 12.00 14.00 10.1 \D' \E' 3.0 1.60 3.1 2.9 3.2 3.4 1.60 1.60 1.60 1.60 \F' \G'Part No. Male-09 Male-25 Male-50 Male-37 Male-15 Number of Position -0.20 +0.0 \C’ -0.20 M2000-109118 M2000-109119 M2000-109120 M2000-109121 M2000-109122 M2000-109123 M2000-109124Male-104 Ordering information: Order on part numbers PLASTIC DUST CAP RECEPTACLE Ordering information: Order on part numbers +0.0 1 16.10 38.10 54.50 52.10 24.50 Sr. NO. \A' 7.60 7.60 10.50 7.60 7.60 8.1 8.0 7.6 8.10 7.8 8.1 12.1 12.0 12.6 12.6 \D' \E' 3.1 1.60 3.1 3.0 2.5 2.5 1.60 1.60 1.60 1.60 \F' \G'Part No. M2000-109125 M2000-109126 M2000-109127 M2000-109128 M2000-109129 Female-09 Female-25 Female-50 Female-37 Female-15 Number of Position -0.2 +0.0 \C’ -0.2 ust Cover ‘E’ ‘F’ ‘D’ R. 0.50 ‘A’ ‘C’ ‘G’ THICK R. 2.600

10 MATERIAL: PVC per UL 94V-0

Notice : All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances, Amphenol reserves the right to change specifications without notice. This publication D Sub Series Connectors 10/10 supercedes all existing Amphenol literature on D Sub Series Connectors. D

www.czarcontent.com

Amphenol Fiber Systems International

1300 Central Expressway North

Suite 100 Allen,Texas 75013, USA Tel: +1-214-547-2400 Fax: +1-214-547-9344 Amphenol PCD

72 Cherry Hill Drive

Beverly, MA 01915 USA Tel: +1-978-624-3400 Fax: +1-978-927-1513 info@amphenolpcd.com www.amphenolpcd.com www.backshellworld.com Sales & Product Support 40-60, Delaware Avenue Sidney, NY 13838-1395 Tel: +1-607-563-5011 Fax: +1-607-563-5357 Amphenol Aerospace Operations Amphenol Canada Meford Drive Scarborough, Tel: +416-291-4401 Fax: +416-292-0647 ON MIB 2X6 France Amphenol Socapex S.A.S. 948,Promenade de I'Arve Bp29, Thyez Cedex 74311, France Tel: +33-4-5089-2800 Fax: +33-4-5096-1941 Amphenol Air-LB Immeuble Le Doublon 11, Avenue Dobonnet Courbevoice-Cedex 92407, France Fax: +33-1-4905-3043 Germany Amphenol-Air LB GmbH Am Kleinbahnhof 4 Saarlouis D-66740, Germany Tel: 49-6831-9810-00 Fax: 49-6831-9810-30 Holland Amphenol Benelux Zadelmaker 121 NL-2401 PD Alphen aan den Rijn Holland Tel:+31-172-444903 Fax:+31-172 240254 United Kingdom Amphenol Limited Thanet Way, Whitstable Kent CT5 3JF, England Tel: +44-1227-773-200 Fax: 44-1227-276-571 Italy Via Barbaiana 5

20020 Lainate (Milano)

Tel :+39-02-93254.209 +39-02-93254.214 Fax:+39-02-93254-444 Center & East Europe Amphenol Austria Wiener Gasse 68

2380 Perchtoldsdorf

Tel: +43-699-10396071 Fax: +43 699 40396071 EUROPE ASIA China Amphenol PCD Shenzhen 3/F Building, A4 Songbai Industrial Park East Road of Minghuan Gongming Town, Baon District Shenchen, China Tel: +86-755-8173-8000 Fax: +86-755-8173-8180 Japan Amphenol Japan 471-1, Deba, Ritto City Shiga 520-3041, Japan Tel: +81-77-553-8501 Fax: +81-77-551-2200 Korea Amphenol Daeshin Electronics

558 SoSa, SongNae, Bucheon-City

Kyunggi-Do, Korea 420-130 Tel: +82-32-610-3800 Fax: +92-32-673-2507 Singapore Amphenol East Asia Ltd.

72 Bendemeer Road

# 03-33 Luzerne Singapore 339 941 Tel: 65-6294-2128 Fax: 65-6294-3522 Amphenol Interconnect India Pvt. Ltd.

61 Electronics City

Bangalore-560 100, India Ph: +9180-2852-3838 Fax: +9180-2852-0418 Amphenol Interconnect India Pvt. Ltd.

105 Bhosari Industrial Area

Pune-411026, India Tel: +9120-3068-8305 Fax:+9120-2712-9158 India ROW Australia Amphenol Australia Pty Ltd

2 Fiveways Boulevard

Fax: +61-3-8796-8801 Africa Amphenol South Africa

30 Impala Road

2196 Sandton-Chistlehurston

Tel: +27-11-783-9517 Fax: +27-11-783-9519 Russia Amphenol Russia 8-2 Yaroslavskaja Str

129164 Moscow, Russia

Tel: +7-495-937-6341 Fax: +7-495-937-6319 TurkeyIsrael Bar-Tec Ltd. P.O. Box 279 Kfar Sava, 44102 Israel Tel: +972-9-7644100 Fax: +972-9-7674324 Brazil Amphenol do Brasil Ltda Rua Diogo Moreira 132 CEP 05423-010 Sao Paulo-SP, Brazil Tel: +55-11-3815-1003 Fax: +55-11-3815-1629 Argentina Amphenol Argentina Avenida Callao 930 2nd Floor, Office B Plaza C1023AAP Buenos Aires Argentina Tel: 54-11-4815-6886 Fax: 54-11-4814-5779 Spain Amphenol Iberica Edificio Burgosol Oficina N 55 C/Comunidad de Madrid 35 bis - Tel: +34-91-6407302 +34-91-6407306 Fax:+34-91-6407307 Las Rozas (Madrid) Sweden Amphenol Ängsullsvägen 7 S-187 51 Täby Sweden Tel: +46-85-1051816 +46-76-8418600 Fax: +46-70- 2634677 +46-70-2203197 (Nordic & Baltic) Amphenol International Ltd. Sun Plaza Ka:15 Maslak Mah. Bilim Sok. No:5 34398 – Sisli – Istanbul Tel: +90 212 367 92 19 Fax: +90 212 367 92 21