M1F80M12W2-1LA STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 14

Technical content

Datasheet sections

  • 1 Inverter switch
  • 2 NTC
  • 3 Electrical topology and pin description
  • 4 Electrical characteristics (curves)
  • 5 Package information
  • 5.1 ACEPACK DMT‑32 package information

Features

  • AQG 324 qualified
  • 1200 V blocking voltage
  • 78 mΩ of typical RDS(on)
  • Maximum operating junction temperature TJ = 175 °C
  • DBC Cu-AlN-Cu based substrate to improve thermal performance
  • Isolation voltage 3 kV
  • Integrated NTC temperature sensor

Applications

  • On board charger (OBC)

Description

This ACEPACK DMT-32 power module realizes a fourpack topology with integrated NTC, tailored for DC/DC converter stage of the OBC in hybrid and electric vehicles. The power module features four silicon carbide Power MOSFETs of 2nd generation from STMicroelectronics. Thanks to the well-recognized chip technology, the ACEPACK DMT-32 ensures the best compromise between energy losses and high switching frequency operation mode. This module allows you to create complex topologies with very high power densities as well as high efficiency requirements. The AlN insulated substrate enables optimal thermal performance. Moreover, thanks to the specific design featuring grooves on the molding ensure a high creepage distance. ACEPACK DMT-32 N1 N2 PH1 PH2 Product status link M1F80M12W2-1LA Product summary Order code M1F80M12W2-1LA Marking M1F80M12W2-1LA Package ACEPACK DMT‑32 Packing Tube Automotive‑grade ACEPACK DMT‑32 power module, fourpack topology, 1200 V, 78 mΩ typ. SiC Power MOSFET with NTC M1F80M12W2-1LA Datasheet DS13998 - Rev 3 - September 2024 For further information contact your local STMicroelectronics sales office.

1 Inverter switch

Table 1. Absolute maximum ratings

  1. Pulse width is limited by safe operating area.

Table 2. Electrical characteristics - SiC MOSFET

Table 3. Reverse intrinsic SiC diode characteristics

2 NTC

Table 4. Absolute maximum ratings for NTC temperature sensor, considered as stand-alone

3 Electrical topology and pin description

Figure 1. ACEPACK DMT-32 pin layout (bottom view) Table 5. Pin description

1 NC 17 NC

2 NC 18 NC

3 N1 19 P2

4 N1 20 P2

5 S2 21 NC

6 G2 22 G3

7 PH1 23 S3

8 PH1 24 NC

9 NC 25 PH2

10 S1 26 PH2

11 G1 27 G4

12 NC 28 S4

13 P1 29 N2

14 P1 30 N2

15 NC 31 T1 (NTC)

16 NC 32 T2 (NTC)

Figure 2. Electrical topology and pin description

4 Electrical characteristics (curves)

Figure 3. Typical output characteristics (TJ = -40 °C) Figure 4. Typical output characteristics (TJ = 25 °C) Figure 5. Typical output characteristics (TJ = 175 °C) Figure 6. Typical transfer characteristics Figure 7. Typical reverse conduction characteristics Figure 8. Typical reverse conduction characteristics

5 Package information

To meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions, and product status are available at: www.st.com. ECOPACK is an ST trademark.

5.1 ACEPACK DMT‑32 package information

Figure 18. ACEPACK DMT‑32 package outline

Package information

DS13998 - Rev 3 page 10/14

Table 6. ACEPACK DMT‑32 package mechanical data Table 7. Ratings for module DS13998 - Rev 3 page 11/14

Revision history

Table 8. Document revision history 23-May-2022 1 First release. 24-Aug-2022 2 Updated Table 2. Electrical characteristics - SiC MOSFET. Modified Features, Applications and Description. (bottom view) and Figure 2. Electrical topology and pin description. Added Section 4: Electrical characteristics (curves). Updated Section 5.1: ACEPACK DMT‑32 package information.

IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2024 STMicroelectronics – All rights reserved M1F80M12W2-1LA DS13998 - Rev 3 page 14/14