M16 OMRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Indicator (Cylindrical 16-dia.) M16 Cylindrical 16-dia. Indicator

  • Same basic design as the A16 Pushbutton Switch. Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety Precautions on page 11. List of Models Button Colors Appearance Model Solder terminals Rectangular M16-J Square M16-A Round M16-T Voltage- reduction lighting M16-@ Screw-less Clamp M16-@ The button colors when the buttons are lit and when they are not lit are shown below. Use these colors as reference only. The actual colors may vary. When not lit When lit R (Red) Y (Yellow) PY (Pure yellow) G (Green) W (White) A (Blue) PW (Pure white)

Lamp, and Socket. For information on combinations, refer to Ordering Information on the following pages. Lighted Models Display Unit Socket Unit Set with Voltage-reduction Lighting Socket Unit Set with Screw-less Clamp Connector M 1 6 5 - T R - 24D - S (2) Shape of Display Symbol Shape J Rectangular A Square T Round (1) Degree of Protection Symbol Protection No symbol IP40

5 IP65 oil-resistant

(4) Light Source Voltage Reduction Unit (24-V Built-in LED)

  • Solder terminals are available only with 100-V models.
  • Screw-less clamp connectors are used for 200-V models. Symbol Type Operating voltage Rated voltage

5 Incandescent

5 VAC/VDC 6 VAC/VDC

5 ±5% VDC 5 VDC 12D 12 ±5% VAC/VDC 12 VAC/VDC 24D 24 ±5% VAC/VDC 24 VAC/VDC Symbol Type Operating voltage Rated voltage T1 LED 100/110 VAC/VDC 110 VAC/VDC T2 200/220 VAC/VDC 220 VAC/VDC (5) Terminal Type Symbol Terminal type No symbol Solder terminals S Screw-less Clamp (3) Color of Display

  • Color illuminated models are also available (see page 4).
  • Order the parts separately. Symbol Color RR e d G Green YY e l l o w PY Pure yellow WW hite PW Pure white AB l u e Rectangular, Square, Round Voltage-reduction lighting Lamp Lamp

Ordering Information

the Display, Case, Lamp, and Socket. M16@-J (Rectangular) Models Solder Terminal Models * Enter the desired color symbol into @ in the model number. M16@-A (Square) Models Solder Terminal Models * Enter the desired color symbol into @ in the model number. M16@-T (Round) Models Solder Terminal Models Note: Neon lamps are not available with models that are ordered as a set. They must be ordered individually if required. * Enter the desired color symbol into @ in the model number. Appearance Degree of protection Lighting IP40 IP65 oil-resistant Display color symbol * Rectangular (M16-J) LED without Voltage Reduction Unit

5 VDC M16-J@-5D M165-J@-5D R: red

Y: yellow G: green A: blue W: white PY: pure yellow PW: pure white

12 VAC/VDC M16-J@-12D M165-J@ -12D

24 VAC/VDC M16-J@-24D M165-J@ -24D

5 VAC/VDC M16-J@-5 M165-J@-5 R: red

Y: yellow G: green A: blue W: white PY: pure yellow

12 VAC/VDC M16-J@-12 M165-J@-12

24 VAC/VDC M16-J@-24 M165-J@-24

Appearance Degree of protection Lighting IP40 IP65 oil-resistant Display color symbol * Square (M16-A) LED without Voltage Reduction Unit

5 VDC M16-A@-5D M165-A @-5D R: red

Y: yellow G: green A: blue W: white PY: pure yellow PW: pure white

12 VAC/VDC M16-A@-12D M165-A @-12D

24 VAC/VDC M16-A@-24D M165-A @-24D

5 VAC/VDC M16-A@-5 M165-A @-5 R: red

Y: yellow G: green A: blue W: white PY: pure yellow

12 VAC/VDC M16-A@-12 M165-A @-12

24 VAC/VDC M16-A@-24 M165-A @-24

Appearance Degree of protection Lighting IP40 IP65 oil-resistant Display color symbol * Round (M16-T) LED without Voltage Reduction Unit

5 VDC M16-T@-5D M165-T @-5D R: red

Y: yellow G: green A: blue W: white PY: pure yellow PW: pure white

12 VAC/VDC M16-T@-12D M165-T @-12D

24 VAC/VDC M16-T@-24D M165-T @-24D

5 VAC/VDC M16-T@-5 M165-T@ -5 R: red

Y: yellow G: green A: blue W: white PY: pure yellow

12 VAC/VDC M16-T@-12 M165-T @-12

24 VAC/VDC M16-T@-24 M165-T @-24

■ Accessories, replacements, and tools: Refer to the A16. ■ Ratings and characteristics: Refer to the A16. ■ Dimensions: Refer to pages 9 to 10. Individual models: Refer to pages 4 to 7. (The Display, Lamp, Case, and Switch can be ordered separately.)

available as sets can be created using individual parts. Also, store the parts as spares for maintenance and repairs. Lighted Models  For colored illumination, order the Display, Case, Lamp, and Socket Unit separately. Display (Refer to page 6.) Case (Refer to page 7.) Lamp (Refer to page 7.) Socket (Refer to page 7.) Rectangular Square Round Note: Use IP40 Displays in combination with IP40 Cases and use IP65 Displays in combination with IP65 Cases. The Display has a legend plate built in. Note: Display Units, which are combinations of Displays and Cases, are also available. LED Incandescent Lamp Note: Socket Units, which are combinations of Lamps and Sockets, are also available. Solder Terminals (Without Voltage Reduction Unit)

Insert one of the following symbols into the box in the model number. * Use this pushbutton color if the illumination color of the LED is white or pure white. Appearance Classification Model IP40 Rectangular (2-way guard) A16-J@M Square (2-way guard) A16-A@M Round (projecting model) A16-T@M Oil-resistant IP65 Rectangular (2-way guard) A165-J@M Square (2-way guard) A165-A@M Round (projecting model) A165-T@M Symbol Color Remarks RR ed LED and incandes- cent lamps YY ellow PY Pure yellow AB lue WW hite* GY Green LED only G Green Incandescent only Socket Unit Sets with Incandescent Lamps Socket Unit Sets with LEDs Appearance Classification Model 5 V Solder terminals M16-5

12 V M16-12

24 V M16-24

Appearance Classification Model Solder terminals M16-@1 -@2 Insert symbols into the boxes with circled numbers. Symbol Color RR ed YY ellow AB lue WW hite G Green Symbol Type Operating voltage LED

5 VDC

Socket Unit Sets with Voltage-reduction Lighting (Solder Terminals) Note: The LED has 24-VAC/VDC circuit built in. Socket Unit Sets with Screw-less Clamp Connectors Note: 1. The LED built into the 100-V model is 24 VAC/VDC. 2. The LED built into the 200-V model is high-intensity 24 VAC/VDC. Appearance Classification Model 100/110 VAC/VDC M16-@1 -T1 Appearance Classification Model Display No voltage-reduction lighting M16-@1 -@2 -S Voltage-reduc- tion lighting (See note.) 100/110 VAC/VDC M16-@1 -T1-S 200/220 VAC/VDC M16-@1 -T2-S

available as sets can be created using individual parts. Also, store the parts as spares for maintenance and repairs. Display For LED-lighted Models Incandescent Lamps (With the exception of green, the Units are the same as for LEDs.) Sealing IP40 IP65 oil-resistant Appearance Color of Display Rectangular Square Round Rectangular Square Round Red A16L-JR A16L-AR A16L-TR A165L-JR A165L-AR A165L-TR Yellow A16L-JY A16L-AY A16L-TY A165L-JY A165L-AY A165L-TY Pure yellow A16L-JPY A16L-APY A16L-TPY A 165L-JPY A165L-APY A165L-TPY Green A16L-JGY A16L-AGY A 16L-TGY A165L-JGY A165L-AGY A165L-TGY White A16L-JW A16L-AW A16L-TW A165L-JW A165L-AW A165L-TW Blue A16L-JA A16L-AA A16L-TA A165L-JA A165L-AA A165L-TA Sealing IP40 IP65 oil-resistant Appearance Color of Display Rectangular Square Round Rectangular Square Round Red A16L-JR A16L-AR A16L-TR A165L-JR A165L-AR A165L-TR Yellow A16L-JY A16L-AY A16L-TY A165L-JY A165L-AY A165L-TY Pure yellow A16L-JPY A16L-APY A16L-TPY A 165L-JPY A165L-APY A165L-TPY Green A16L-JG A16L-AG A16L-TG A165L-JG A165L-AG A165L-TG White A16L-JW A16L-AW A16L-TW A165L-JW A165L-AW A165L-TW Blue A16L-JA A16L-AA A16L-TA A165L-JA A165L-AA A165L-TA Ordering set combinations: Refer to page 3. ■ Accessories, replacements, and tools: Refer to the A16. ■ Ratings and characteristics: Refer to the A16. ■ Dimensions: Refer to pages 9 to 10.

available as sets can be created using individual parts. Also, store the parts as spares for maintenance and repairs. Lamp LED * Use the white LED when the required illumination color is white or pure yellow. Incandescent Lamp Case Socket Operating voltage High intensity Color 5 VDC 12 VAC/VDC 24 VAC/VDC Red A16-5DSR A16-12DSR A16-24DSR Yellow A16-5DSY A16-12DSY A16-24DSY Green A16-5DSG A16-12DSG A16-24DSG White * A16-5DSW A16-12DSW A16-24DSW Blue A16-5DA A16-12DA A16-24DA Pure white A16-5DPW A16-12DPW A16-24DPW Appearance Operating voltage Model

5 VAC/VDC A16-5

12 VAC/VDC A16-12

24 VAC/VDC A16-24

Appearance Classification Model number IP40 Rectangular A16-CJM Square A16-CAM Round A16-CTM IP65 oil-resistant Rectangular A165-CJM Square A165-CAM Round A165-CTM Appearance Classification Model number Solder terminals M16-0 PCB terminals M16-0P Screw-Less Clamp M16-S Solder terminals Voltage- reduction lighting

100 V M16-T1

100 V M16-T1-S

200 V M16-T2-S

Ordering set combinations: Refer to page 3. ■ Accessories, replacements, and tools: Refer to the A16. ■ Ratings and characteristics: Refer to the A16. ■ Dimensions: Refer to pages 9 to 10.

UL, cUL (File No. E76675) LED: 24 VDC max. Incandescent lamp: 24 VDC/VAC max. Note: Certification has been obtained for the Socket Unit. For detailed information on individual products that have received certification, consult your supplier. Ratings Super-bright LED Incandescent Lamp Characteristics Screw-less Clamp Ambient operating temperature −10°C to 55°C (with no icing or condensation) Ambient operating humidity 35% to 85%RH Ambient storage temperature −25°C to 65°C (with no icing or condensation) Rated voltage Rated current Operating voltage Built-in limiting resistance

5 VDC ±5% Red, yellow, white: 300 Ω

Green, blue, pure white: 160 Ω

12 VAC/VDC 12 VAC/VDC ±5% Red, yellow, white: 1 kΩ

Green, blue, pure white: 910 Ω 24 VAC/VDC 24 VAC/VDC ±5% 2.4 kΩ Rated voltage Rated current Operating voltage

6 VAC/VDC 60 mA 5 VAC/VDC

14 VAC/VDC 40 mA 12 VAC/VDC

28 VAC/VDC 24 mA 24 VAC/VDC

Item Type Screw-less Clamp Recommended wire size 0.5 mm2 twisted wire or 0.8 mm-dia. solid wire Usable wires and tensile strength Twisted wire 0.3 mm2 0.5 mm2 0.75 mm2 1.25 mm2 Tensile strength 10 N 20 N 30 N 40 N Length of exposed wire 10 ±1 mm Compliant standards JIS C 2811 Terminal Blocks for Industrial Use

Dimensions (Refer to the A16 for details of panel cutout dimensions.) (Unit: mm) 18 15.1 10.8 M16×1 4.85 Lamp terminals Lock ring Mounting nut 18 dia. 14.6 dia. 21.1 28.59.3 Packing (t0.5) (for oil-resistant IP65 only) Rectangular M16@-J Solder terminals 18 15.1 15.1 10.8 M16×1 4.85 Lamp terminals Lock ring Mounting nut 18 dia. 14.6 dia. 21.1 28.59.3 Packing (t0.5) (for oil-resistant IP65 only) Square M16@-A Solder terminals 10.8 M16×1 4.85 Lamp terminals Lock ring Mounting nut 18 dia. 14.6 dia. 21.1 28.59.3 Packing (t0.5) (for oil-resistant IP65 only) 15.1 dia. 18 dia. Round M16@-T Solder terminals 2.6 Terminal Hole Dimensions 0.9 1.5 2.8 14.6 dia. 410.8 18 dia. Lamp terminals

Dimensions (Unit: mm) Case Operation Unit 9.5 21.1 Marking face 18 9.80.5 Direction-indication arrow M16×1 42.7 50.1 (22.4) 15.1 20.6 10.8 6 16.6 8.8 Soc ket Mounting ring Lock ringPacking (t0.5) (for oil-resistant IP65 only) 2.8 24 min. 23 min. 16+ 0.2 0 dia. Panel Cutouts Rectangular M16@-J@-T1 Voltage-reduction lighting, solder terminals Mounting ring Lock ringSocket dismounting lever Packing (t0.5) (for oil-resistant IP65 only) 27.4(31.7) 23.5 23.924 9.5 48.9 15.1 M16×1 10.8 25 min. 33 min. 16+ 0.2 0 dia. Panel Cutouts Rectangular M16@-J@-S Screw-less Clamp

Dimensions (All units are in millimeters unless otherwise indicated.) Terminal Arrangement Accessories, Replacements, and Tools The accessories, replacements, and tools are also used with the A16 Pushbutton Switch. Refer to the A16 datasheet. Safety Precautions Refer to Safety Precautions for All Pushbutton Switches/Indicators and Safety Precautions for the A16. Mounting

  • When mounting the Case onto the Socket Unit, ensure that the orientation is correct. Perform mounting with the dimple on the Case and the TOP mark on the Socket Unit facing in the same direction. Wiring
  • When using stranded wire, gather the ends of the strands together before wiring.
  • When wiring, insert the wire until it comes into contact with something. After wiring is completed, pull on the wires to confirm that they are connected securely.
  • After wiring, ensure that continuous pressure is not applied to the terminals.
  • Refer to internal connections diagrams and confirm the terminal numbers before performing wiring. Screw-less Clamps Mounting Procedure 1. Strip a length of 10 mm off the end of the wire (allowable range: 10±1 mm). 2. Bunch wire strands together and straighten them. 3. Insert the wire into the insertion hole while pressing the release button at the side of the hole. (Using a precision screwdriver is recommended.) 4. Let go of the release button to lock the wire into place. 5. After locking, pull on the wire gently to confirm that it is securely locked. Removing Procedure 1. Remove wires by pulling them while pressing the release button. Note: When reusing wires that have already been locked, cut off the end of the wire and strip the wire again before using. Solder Terminals Screw-less Clamp Voltage-reduction Lighting L + L - The L+ is not shown on the Socket Unit. (BOTTOM VIEW) (BOTTOM VIEW) Side with TOP indicated Red Black Side with TOP indicated (BOTTOM VIEW) Models with voltage-reduction lighting have a circuit to reduce voltage built in. Precautions for Correct Use Socket Unit TOP mark Case dimple

Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2015.8 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2015 All Right Reserved.