DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 1 of 7 M15KP22A – M15KP280CA(e3) Available 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device Screening in reference to MIL-PRF-19500 available

DESCRIPTION

This Transient Voltage Suppressor series of M15KP22A – M15KP280CA offers an extended voltage range and also provides a variety of high reliability, uni- and bi-directional options as well. RoHS compliant versions are also available. These devices have the ability to clamp dangerous high voltage transients such as secondary effects of lightning strikes, providing circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is virtually instantaneous. It also provides protection from transients caused by inductive load dumps, RFI, and ESD, providing protection to IEC61000-4-2 and -4-4. Case 5A (DO-204AR) Package Important: For the latest information, visit our website http://www.microsemi.com.

FEATURES

  • Available in both unidirectional and bidirectional configurations
  • 3σ lot norm screening performed on standby current ID
  • 100% surge tested devices
  • Suppresses transients up to 15 kW @ 10/1000 µs and 100 kW @ 8/20 µs (see Figure 1)
  • Various screenings in reference to MIL-PRF-19500 are available. Refer to Hirel Non-Hermetic Product Portfolio for more details on the screening options. (See part nomenclature for all options.)
  • High reliability controlled devices have wafer fabrication and assembly lot traceability
  • Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B
  • RoHS compliant versions are available APPLICATIONS / BENEFITS
  • Selections from 22 to 280 volts stand-off voltage (VWM)
  • Economical TVS series for thru-hole mounting
  • Protection from switching transients & induced RFI
  • Fast sub-nanosecond response (unidirectional)
  • Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively
  • Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance: Class 1, 2, 3, 4: M15KP22A to M15KP280CA Class 5: M15KP22A to M15KP280CA (short distance) Class 5: 1M5KP22A to M15KP110CA (long distance)
  • Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance: Class 1 & 2: M15KP22A to M15KP280CA Class 3: M15KP22A to M15KP240CA Class 4: M15KP22A to M15KP120CA
  • Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance: Class 2: M15KP22A to M15KP220CA Class 3: M15KP22A to M15KP110CA Class 4: M15KP22A to M15KP54CA MSC – Lawrence

6 Lake Street,

Lawrence, MA 01841 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com

RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 2 of 7 M15KP22A – M15KP280CA(e3) MAXIMUM RATINGS @ 25 ºC unless otherwise noted Parameters/Test Conditions Symbol Value Unit Junction and Storage Temperature TJ and TSTG -65 to +150 oC Thermal Resistance, Junction to Lead @ 3/8 inch (10 mm) lead length from body RӨJL 20 oC/W Thermal Resistance, Junction to Ambient (1) RӨJA 80 oC/W Peak Pulse Power Dissipation (2) 10/1000us PPP 15,000 W Steady-State Power Dissipation @ TL = 30 ºC 3/8 inch (10 mm) from body PD 6 1.56 (1) W Tclamping (0 volts to V(BR) min, theoretical) Unidirectional Bidirectional < 100 < 5 ps ns Surge Peak Forward Current (3) IFSM 200 A Solder Temperature @ 10 s 260 oC Notes: 1. When mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and track width 1 mm, length 25 mm. 2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figures 1 and 2). 3. At 8.3 ms half-sine wave for unidirectional devices only. MECHANICAL and PACKAGING

  • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0.
  • TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026.
  • MARKING: Part number.
  • POLARITY: Cathode indicated by band. No cathode band on bidirectional devices.
  • TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
  • WEIGHT: Approximately 1.4 grams.
  • See Package Dimensions on last page. PART NOMENCLATURE M 15 K P 22 C A (e3) Reliability Level* M MA MX MXL (*see Hirel Non-Hermetic Product Portfolio) Peak Pulse Power Kilowatt Rating Encapsulated Plastic Package RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Voltage Tolerance A = 5% tolerance level Polarity C = Bi-directional Blank = Unidirectional Stand-off Voltage Rating (see Electrical Characteristics table)

RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 3 of 7 M15KP22A – M15KP280CA(e3) SYMBOLS & DEFINITIONS Symbol Definition αV(BR) Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in temperature that caused it expressed in %/°C or mV/°C. I(BR) Breakdown Current: The current used for measuring Breakdown Voltage V(BR). ID Standby Current: The current through the device at rated stand-off voltage. IFSM Surge Peak Forward Current: The forward current including all nonrepetitive transient currents but excluding all repetitive transients (ref JESD282-B). IPP Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives. PPP Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The impulse power is the maximum-rated value of the product of IPP and VC. V(BR) Breakdown Voltage: The voltage across the device at a specified current I(BR) in the breakdown region. VC Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an impulse current (IPP) for a specified waveform. VWM Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that may be continuously applied over the standard operating temperature.

RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 4 of 7 M15KP22A – M15KP280CA(e3) ELECTRICAL CHARACTERISTICS @ 25 ºC PART NUMBER REVERSE STAND- OFF VOLTAGE VWM (Note 1) BREAKDOWN VOLTAGE V(BR) @ I(BR) MAXIMUM CLAMPING VOLTAGE VC @ IPP MAXIMUM STANDBY CURRENT ID @ VWM MAXIMUM PEAK PULSE CURRENT IPP (FIG. 2) MAXIMUM TEMPERATURE COEFFICIENT OF V(BR) αV(BR) V V mA V µA A mV/ºC M15KP22A 22 24.4 10 37.1 500 404 24 M15KP24A M15KP26A 26.7 28.9 40.7 44.0 150 369 341 M15KP28A M15KP30A 31.1 33.3 47.5 50.7 316 296 M15KP33A M15KP36A 36.7 40.0 54.8 59.7 274 251 M15KP40A M15KP43A 44.4 47.8 65.8 69.7 228 215 M15KP45A M15KP48A 50.0 53.3 73.0 77.7 205 193 M15KP51A M15KP54A 56.7 60.0 82.8 87.5 181 171 M15KP58A M15KP60A 64.4 66.7 94.0 97.3 160 154 M15KP64A M15KP70A 71.1 77.8 104 114 144 132 M15KP75A M15KP78A 83.3 86.7 122 126 123 119 M15KP85A M15KP90A 94.4 100 137 146 109 103 102 109 M15KP100A M15KP110A 100 110 111 122 162 178 121 133 M15KP120A M15KP130A 120 130 133 144 193 209 145 157 M15KP150A M15KP160A 150 160 167 178 243 259 183 195 M15KP170A M15KP180A 170 180 189 200 275 291 207 219 M15KP200A M15KP220A 200 220 222 245 322 356 243 269 M15KP240A M15KP260A 240 260 267 289 388 419 293 317 M15KP280A 280 311 5 452 10 33 342 ** Consult factory for availability of the 17 and 18 Volt devices on a special order basis. NOTES: 1. Transient Voltage Suppressors are normally selected with reverse “stand-off voltage” (VWM) which should be equal to or greater than the dc or continuous peak operating voltage level.

RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 7 of 7 M15KP22A – M15KP280CA(e3) PACKAGE DIMENSIONS Dimensions Dim Inch Millimeters Min Max Min Max LL 0.750 - 19.05 - BL 0.365 0.385 9.27 9.78 BD 0.235 0.255 5.97 6.48 LD 0.047 0.053 1.194 1.346