M140T01-AE0501A MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Page <1> V1.002/10/20 Microswitch SPDT, Short Lever Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Specifications: Rating : 5A, 125/250V AC : 5(2)A, 125/250V AC (NEMKO/ENEC/CQC) : 40T125 μ5E4 Maximum Contact Resistance : 500MΩ Insulation Resistance : >100MΩ 500V DC Withstand Voltage : 1,000V AC for 1 minute Operating Frequency : Mechanical 60 operations/minute : Electrical 6 to 12 operation/minute Ambient Temperature : -25°C to +85°C Ambient Humidity : ≤ 85%RH Mechanical Life : 1,000,000 cycles Electrical Life (at rate load) : 50,000 cycles Contact Configuration : SPDT Microswitch Type : Snap Action Actuator Style : Short Lever Switch Operation : Off-On Switch Terminals : Solder Contact Resistance : 50mΩ External Depth : 6.4mm External Width : 19.8mm Height : 10.6mm Operating Force : 0.59N Pre-travel : 3.6mm Series : M140T01 Switch Case : PBT (Polybutylene Terephthalate)
Page <2> V1.002/10/20 Microswitch SPDT, Short Lever Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro
Description
Operating force (gf) OP (mm) Max. FP (mm) Part number A B C D E Microswitch, SPDT, 5A, Short Lever 25 35 45 55 60 9.4 ±1.5 12.6 M140T01-AE0501A Part Number Table Dimensions: MillimetresNote: Tolerances unless otherwise specified: ±0.016/0.4 inches/mm Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.