BES05Y7 BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Smart Automation and Monitoring System Inductive Sensors BES M12EH1-L01C40B-S04G-L04 Order Code: BES05Y7 Internet www.balluff.com eCl@ss 9.1: 27-27-01-01 Subject to change without notice: 282010 ETIM 6.0: EC002714 BES05Y7_0.34_2021-08-31 Basic features Application Object detection Approval/Conformity CE EAC cULus IO-Link WEEE Ecolab Basic standard IEC 60947-5-2 Operating mode SIO Mode IO-Link Mode Scope of delivery 2x nut M12x1 Display/Operation Function indicator yes Power indicator no Electrical connection Connection M12x1-Male, 4-pin, A-coded Polarity reversal protected yes Protection against device mix-ups yes Short-circuit protection yes Electrical data Load capacitance max. at Ue 0.25 µF Operating voltage Ub 10...30 VDC Rated operating current Ie 100 mA Rated operating voltage Ue DC 24 V DC Rated short circuit current 100 A Ready delay tv max. 300 ms Ripple max. (% of Ue) 10 % Switching frequency 1000 Hz Utilization category DC -13 Voltage drop static max. 1.5 V Environmental conditions Ambient temperature -40 °C...85 °C Contamination scale 3 EN 60068-2-27, Shock Half-sinus, 30 g , 11 ms EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3x30 min IP rating IP68, IP69K Functional safety MTTF (40 °C) 380.7 a n
Smart Automation and Monitoring System Inductive Sensors BES M12EH1-L01C40B-S04G-L04 Order Code: BES05Y7 Internet www.balluff.com eCl@ss 9.1: 27-27-01-01 Subject to change without notice: 282010 ETIM 6.0: EC002714 BES05Y7_0.34_2021-08-31 IO-Link IO-Link Profil IDs 0x0004 SSP2.1 0x0005 SSP2.2 0x0006 SSP2.3 0x4000 Identification and Diagnosis Supported IO-Link Profiles Common Profile Legacy Smart Sensor Profile Smart Sensor Profile - Adjustable Switching Sensor Interface Interface IO-Link 1.1 Interface setting option Factory setting (Reset) SIO mode/IO-Link mode Teach-In of switchpoints Process data IN Teaching successfully reply 1 byte Switching state Switching output PNP/NPN/push-pull NO/NC Push-pull NO/NC Material Housing material 1.4404 stainless steel Material sensing surface PBT Mechanical data Dimension Ø 12 x 65 mm Installation quasi-flush Size M12x1 Tightening torque 10 Nm Range/Distance Assured operating distance Sa 3.2 mm Hysteresis H max. (% of Sr) 15 % Measuring range 0.5...4 mm Rated operating distance Sn 4 mm Repeat accuracy max. (% of Sr) 5 % Switching distance marking ■■ Temperature drift max. (% of Sr) 10 % Tolerance Sr 10 % Remarks After eliminating the overload, the sensor must be disconnected from the supply voltage. The sensor is then functional again. Sensors with IO-Link function are not suitable for series or parallel wiring. Quasi-flush: See installation instructions for inductive sensors with extended range 939221 For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way. Connector Drawings Wiring Diagrams