M12-HS1-5KCB2 Standex-Electronics,-Inc

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

standexelectronics.comDatasheet Rev CCA Page 1 +1 970.879.9900 | sensorsales@standexelectronics.com M12-HS1-5KCB2 Hall or Magneto Resistive Switch Sensor  Sensitive S-pole hall switch  55 gauss operate  NPN w/5k pull up resistor  Plastic 12x1mm x 35mm housing  Integral 4 pin male 12mm micro connector Part Description: M 12 - HS 1 - 5 KCB 2 Housing Sensor Type & Function Electrical Option Connection Type Plastic 12x1mm x 35mm Long Hall Switch 1 Digital Output Sensitive S-Pole NPN, 5k Pull Up Resistor CB2 = Integral 4 Pin Male 12mm Micro Connector ‘1 Digital Output’ Sensitive S-Pole Hall Switch Sensor CUSTOMER FOCUSED ENGINEERING + MODULAR DESIGN HOUSING - Aluminum, stainless steel, plastic, threaded, flange mount, customer specific ELECTRICAL - Every sensor function available in various electrical options (NPN, PNP, TTL, etc.) CONNECTION - Deutsch, Amphenol, many other brands, free end wires, pigtails, any length Need a Custom Sensor Solution?... Send us your application specific requirements at sensorso.com Modify, update, or enhance any sensor with our modular features and functionality.

DESCRIPTION

  • Sensor triggers ON (LOW) when a South Pole magnet field is present and turns OFF (HIGH) when the South Pole magnetic field retracts.
  • Sensor does not respond to North Pole magnetic fields. Contact Sensor Solutions for alternative sensors.
  • No orientation required. Use lock nuts to set air gap within range of target magnets.
  • Square wave output pulses can be used to detect speed, position, proximity, or count.
  • Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet.

FEATURES

  • Internal Hysteresis
  • Lower Gauss Operation than Standard HS Sensor
  • Solid State (Nothing to wear out!)
  • Temperature Stable

standexelectronics.comDatasheet Rev CCA Page 2 +1 970.879.9900 | sensorsales@standexelectronics.com In addition to the HS1, we offer a variety of South Pole and Either pole Hall Effect and Magnetoresistive sensors including multiple programmable sensors, North and South Pole output sensors, latching sensors, and sensors with speed/count and direction outputs. Note: Check our website or contact us to discuss all of our magnetic speed, count, and position detection sensors. Environmental Specifications Corrosion Resistance 500 hours salt spray ASTM B-117 Installation Torque 13 Foot-Pounds Maximum Enclosure Nema 1,3,4,6,13 & IEC IP67 Vibration 10 G’s 2 to 2000 Hz Sinusodal Mechanical Shock 100 G’s, 11 mS Half-Sine M12-HS1-5KCB2 Hall or Magneto Resistive Switch Sensor Rev A OTHER MATING CONNECTORS AND CABLES AVAILABLE Connections Chart Pin 1 Vcc Pin 3 Ground Pin 2 n/c Pin 4 Digital Vout CB2-HS1 Electrical Specifications Conditions Min Max Unit Temperature Range* Operating -40 +150 Deg C Supply Voltage, Vcc Over temperature +3 +24 Volts DC Supply Current, Output Off Into Vcc @ Vcc=12 +2 +7 mA Chopper Frequency Typical 333 800 kHz Frequency Range 8x over sample 0 12 kHz Saturation Voltage High 100% Tested at 20°C before shipping Vcc = 12 V 11.5 12 Volts Saturation Voltage Low 100% Tested at 20°C before shipping Vcc = 12 V 0 0.4 Volts Internal Pull Up Resistor Vcc to Vout 4.9 5.1 k Ohms Output Rise Time 10-90% C < 100pF - 2.0 µS Output Fall Time 90-10% C < 100pF - 1.0 µS ESD (Human Body Model) Nondestructive - 8000 Volts EMI (Human Body Model) 20k to 1 G Hz - 100 V / M Rev C Absolute Max Limits T < 5 minutes Min Max Unit Supply Voltage, Vcc -32 +32 Volts DC Voltage Applied to Output -32 +32 Volts Current Into Output - 60 mA Current Out of Output - Vcc/5k mA Load Dump, 40 mS Rs = 100 Ω - 40 Volts Magnetic Characteristics Min Typ Max Operate Point Over Temp 100% Tested at 20°C before shipping 15 G 55 G 76 G Release Point Over Temp 5 G 35 G 57 G Hysteresis Over Temp 5 G 20 G 28 G

standexelectronics.comDatasheet Rev CCA Page 3 +1 970.879.9900 | sensorsales@standexelectronics.com Marking Please note: All technical specifications on this series datasheet refer to the standard product range. Modifications in the sense of technical progress are reserved. For general information only. For more specific information, please consult the product datasheet, available upon request. This series datasheet could contain technical inaccuracies or typographical errors. Changes are periodically made to the information herein. These change will be incorporated in future revisions. For deviating values, most current specifications and products please contact your nearest sales office. M12-HS1-5KCB2 Hall or Magneto Resistive Switch Sensor 5K, 5k Pull-up Resistor Handling Instructions DO NOT CONTACT FACE TO FACE CONTACT WITH OTHER MAGNETS MAY REDUCE THE MAXIMUM OPERATING GAP Date Code ‘YYM’ YY = YEAR, M = MONTH A JAN D APR H JUL L OCT B FEB E MAY J AUG M NOV C MAR G JUN K SEP N DEC HS1-yy 06A CHARACTERISTIC-OPTION MARKED ON THIS SURFACE DATE CODE, THIS SURFACE HS1-5K 22J SENSOR NPN Vcc Vout GND