M10BC 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Scotchlok™ Terminals M18BC, M14BC, M10BC Butt Connector, Non-Insulated, Seamless Data Sheet Specifications Wire Size: See Table Above Barrel Seam: Seamless Maximum Current: Same as Wire Terminal Material: ETP Copper Terminal Plating: Tin Installation Information UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style) or TR-490 (ratchet style) hand tools. UNDERWRITERS LABORATORIES STANDARD NO. UL 486C 3M FILE NO. E23438 CANADIAN STANDARDS ASSOCIATION STANDARD NO. 22.2 NO. 0, 65 3M FILE NO. LR22190 Barrel Crimp (Required) L /L60445WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. tcudorP rebmuN egnaReriW )GWA(L s senkcihT lerraB htgneL lerraB .D.I CB81M8 1-223 6.01 30.08 2.02 60.0 CB41M4 1-616 6.01 30.00 3.05 90.0 CB01M0 1-211 8.08 30.08 3.02 41.0
Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 http://www.3M.com/elpd Litho in USA. © 3M 2002 78-8125-9669-6-A IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. Y ou assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability.This product will be free from defects in material and manufacture as of the date of purchase.3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Engineering Specification Crimp-type terminals shall, electrically and mechanically, connect permanently to the pre-stripped end of two stranded copper wires. The connector line shall offer barrel variations in wire (AWG) size (22-18, 16-14, 12-10) and construction (non- insulated brazed seam, vinyl insulated butted seam, nylon insulated seamless, etc...). The connector line shall have regulatory agency coverage (UL Listing, CSA Certification). The connectors shall be marked with the wire range and manufacturer’s symbol (/barb2up). The non-insulated, seamless butt connector shall be tin plated, annealed copper, having a double-length, round seamless barrel with a center stop, sized for a specified (AWG) wire range (22-18, 16-14, 12-10). 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association.