M0810-2R5105-R EATON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- 2.5 Volts
- Low ESR
- High capacitance long cycle life
- Low ESR with high energy density
- Low leakage current
- UL recognized
Applications
- Pulse Power
- Bridge or hold-up power Pb HALOGEN HFFREE
www.eaton.com/electronics Ratings Capacitance 1.0 F to 9.0 F Maximum working voltage 2.5 V Surge voltage 3.0 V Capacitance tolerance -20% to +80% (+20 °C) Operating temperature range -40 °C to +60 °C Extended temperature range -40 °C to +85 °C (Maximum working voltage 2.0 V) Specifications Capacitance (F) Part Number Nominal ESR (Ω) (Equivalent Series Resistance) Measured @ 1 kHz 100 Hz Nominal dimensions (mm) (diameter x length) Typical Mass (grams/piece) 1 M0810-2R5105-R 0.210 0.250 8 13 1.2 2 M0820-2R5205-R 0.075 0.100 8 20 1.5 3 M1020-2R5305-R 0.035 0.050 10 20.5 2.8 6 M1030-2R5605-R 0.025 0.035 10 30 3.9 9 M1325-2R5905-R 0.020 0.030 13 26 5.6 Performance Parameter Capacitance change (% of initial value) ESR (% of max. initial value) Life (1000 hours @ +60 °C @ 2.5 Vdc) ≤ 30% ≤ 200% Storage - Low and High Temperature (1000 hours @ -40 °C and +60 °C) ≤ 30% ≤ 200% Dimensions (mm) Part Number D D’ L L’ F d’ C C’ Tolerances Maximum ±0.5 ±0.02 Minimum Part numbering system M 1325 — 2R5 90 5 -R Family Code Size reference (mm) Voltage (V) R = Decimal Capacitance (μF) Value Multiplier Standard product M Family Diameter = 13 Length = 25 2R5 = 2.5 V Example: 905 = 9 x 105 μF or 9.0 F Packaging information
- Standard packaging: Bulk, 100 units per bag
- Larger bulk packages available on request Part marking
- Manufacturer
- Capacitance (F)
- Nominal working voltage (V)
- Family code (or part number)
- Polarity
1000 Eaton Boulevard
Cleveland, OH 44122 United States www.eaton.com/electronoics © 2016 Eaton All Rights Reserved Printed in USA Publication No. 4080 October 2016 Eaton is a registered trademark. All other trademarks are property of their respective owners. M Supercapacitors Cylindrical cells Technical Data 4080 Effective October 2016 Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Wave solder profile Profile Feature Standard SnPb Solder Lead (Pb) Free Solder Preheat and soak • Temperature max. (Tsmax) 100 °C 100 °C
- Time max. 60 seconds 60 seconds D preheat to max Temperature 160 °C max. 160 °C max. Peak temperature (TP)* 220 °C – 260 °C 250 °C – 260 °C Time at peak temperature (tp) 10 seconds max 5 seconds max each wave 10 seconds max 5 seconds max each wave Ramp-down rate ~ 2 K/s min ~3.5 K/s typ ~5 K/s max ~ 2 K/s min ~3.5 K/s typ ~5 K/s max Time 25 °C to 25 °C 4 minutes 4 minutes Manual solder +350 °C, 4-5 seconds. (by soldering iron), generally manual, hand soldering is not recommended. Reflow soldering Do not use reflow soldering using infrared or convection oven heating methods. Cleaning/Washing Avoid cleaning of circuit boards, however if the circuit board must be cleaned use static or ultrasonic immersion in a standard circuit board cleaning fluid for no more than 5 minutes and a maximum temperature of +60 °C. Afterwards thoroughly rinse and dry the circuit boards. In general, treat supercapacitors in the same manner you would an aluminum electrolytic capacitor. Temperature Time Tsmin Tsmax Tstyp Tp tp First Wave Second Wave Preheat area Cool down area