257801 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
PART NO. ECN # REV REVISIONS DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD 14/01/12 14/01/12 28/01/12JAGRELEASED257795 Important Notice :This data sheet and its contents (the "Information") belong to the mem- bers of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously sup- plied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not oper- ate to limit or restrict the Group's liability for death or personal injury resulting from its negli- gence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. TOLERANCES: DRAWN BY: SN JAG CHECKED BY: APPROVED BY: DATE: DRAWING TITLE: Jack Screws - Screw Lock Accessories 58231_DWGM10002506 14/01/12 DATE: SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 1 OF 2 DWG NO. ELECTRONIC FILE REV AA DATE: 28/01/12 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. SN 14/01/12 Features:
- • Bright tin or nickel plating suitable for EMI/RFI shielded ‘D’ connectors The base of the female screwlocks have chamfered corners to prevent scratching of surface during assembly. Dimensions : Millimetres (Inches)
PART NO. ECN # REV REVISIONS DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD 14/01/12 14/01/12 28/01/12JAGRELEASED257795 Important Notice :This data sheet and its contents (the "Information") belong to the mem- bers of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously sup- plied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not oper- ate to limit or restrict the Group's liability for death or personal injury resulting from its negli- gence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. TOLERANCES: DRAWN BY: SN Jagan CHECKED BY: APPROVED BY: DATE: DRAWING TITLE: Jack Screws - Screw Lock Accessories 58231_DWGM10002506 14/01/12 DATE: SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 2 OF 2 DWG NO. ELECTRONIC FILE REV AA DATE: 28/01/12 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. SN 14/01/12 Description Thread Length (L) Tolerance Type Packaging Part Number Screwlock, D, Female, PK2 14.5 14.25 to 14.75 D20418-2145 2 per Pack 105025 Screwlock, D, Female, 8 mm, 4-40 Unc 7.9 7.75 to 8.05 D20418-2 257795 Screwlock, Female, 14.5 mm, 4-40 Unc 14.5 14.25 to 14.75 D20418-2145 257801 Dimensions : Millimetres www.element14.com www.farnell.com www.newark.com
PART NO. ECN # REV REVISIONS DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD 15/2/12 15/2/12 29/2/12JGMRDRELEASED257801 Important Notice :This data sheet and its contents (the "Information") belong to the mem- bers of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the prod- ucts to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously sup- plied. The Information supplied is believed to be accurate but the Group assumes no respon- sibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. pro-SIGNAL is the registered trademark of the Group. © Premier Farnell plc 2012. TOLERANCES: DRAWN BY: MRD JG CHECKED BY: APPROVED BY: DATE: DRAWING TITLE: 4 - 40 Nut R-D9011-H(1.0)_DWGM10002265 15/02/12 DATE: SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 1 OF 1 DWG NO. ELECTRONIC FILE REV A15/02/12 A DATE: 29/02/12 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. Dimensions : Millimetres Description Part Number Screwlock, Female, 14.5 mm, 4-40 UNC 257801 Part Number Table Tolerance Unless Specified www.element14.com www.farnell.com www.newark.com www.cpc.co.uk . . . . . ±0.1 Angle ±1°