5F40360M MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
PART NO. ECN # REV REVISIONS DESCRIPTIONDRAWN DATE DATE DATECHECKD APPRVD Veena11/4/08 11/4/08 25/4/08Suresh G. C RELEASED 5F40360M-10NR-XX This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change with- out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008. TOLERANCES: DRAWN BY: Veena Suresh G.Cook CHECKED BY: APPROVED BY: DATE:DRAWING TITLE: IDC Centronic Socket - 36 Way 1099283_DWG M10000828 11/04/08 DATE:SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 1 OF 3 DWG NO.ELECTRONIC FILEREV A 11/04/08 A DATE: 25/04/08 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. Specifications: Current rating : 1A : AWG28/1, 2A : AWG26. Insulation resistance : ≥1000 MΩ. Dielectric with standing volatage : 500V, at sea level. Operating temperature : - 55°C to 105°C (limited by cable). Contact resistance : ≤20mΩ. Dielectric material : PBT and glass reinforced. Contact material : Phosphor bronze. Contact plating : Gold over nickel. Wire size : AWG26 and AWG28 stranded, 1.27mm conductor center flat cable. Dimensions : Millimetres (Inches)
PART NO. ECN # REV REVISIONS DESCRIPTIONDRAWN DATE DATE DATECHECKD APPRVD Veena11/4/08 11/4/08 25/4/08Suresh G. C RELEASED 5F40360M-10NR-XX This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change with- out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008. TOLERANCES: DRAWN BY: Veena Suresh G.Cook CHECKED BY: APPROVED BY: DATE:DRAWING TITLE: IDC Centronic Socket - 36 Way 1099283_DWG M10000828 11/04/08 DATE:SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 2 OF 3 DWG NO.ELECTRONIC FILEREV A 11/04/08 A DATE: 25/04/08 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. Specification Table Dimensions : Millimetres (Inches) Dimensions : Millimetres (Inches) Recommended Front Mount PanelRecommended Rear Mount Panel Strain Relief
PART NO. ECN # REV REVISIONS DESCRIPTIONDRAWN DATE DATE DATECHECKD APPRVD Veena11/4/08 11/4/08 25/4/08Suresh G. C RELEASED 5F40360M-10NR-XX This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change with- out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008. TOLERANCES: DRAWN BY: Veena Suresh G.Cook CHECKED BY: APPROVED BY: DATE:DRAWING TITLE: IDC Centronic Socket - 36 Way 1099283_DWG M10000828 11/04/08 DATE:SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 3 OF 3 DWG NO.ELECTRONIC FILEREV A 11/04/08 A DATE: 25/04/08 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. Contact and Connecting Types 360 Number of Contacts Part Number Explanation: Series Number 5F- - http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Color Codes XX Customber R Mounting Types N Strain Relief M Housing Construction Types Contact Finish Series Number :5F = I.D.C. ribbon connector. Contact and Connecting type : 40 = Socket, cable to panel connecting type. Number of Contacts :360 = 36 Positions. Housing Construction Types : M = With metal front shell. Color Codes :1 = Blue. Contact Finish :0 = Selectived gold flash over nickel. Strain Relief :N = Without strain relief. Mounting Types :R = Without rivet through holes. Customer :XX = Inland.