M0020

M0020 NORGREN | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

en 9.1.010.01 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2006 - 9071d) © 2015 Norgren Ltd. Medium: Compressed air Operating pressure: 10 bar (145 psi) max. Vacuum: 750 mmHg Tube sizes: 3, 4, and 6 mm Thread sizes: M3, M5, M6, R1/8 and Rc1/8 Tubing types: PA 11 or 12 PUR 85, 95 or 98 durometer Ambient/Media temperature: Materials: Body: PBT Seals: NBR (VMQ free) u-packing and O-rings Threaded bodies: nickel plated brass Backing ring: POM Grab-ring: stainless steel Collar: nickel plated brass Thread sealant: Chemitech G-175L Technical features Method of assembly Components 1. Ensure that the end of the tube is cut square and is free from burrs. 2. Push the tube through the col- let into the fitting. 3. Continue pushing the tube through the ‘O’-ring until it bottoms on the tube stop then pull back. 4. To disconnect push the tube into the fitting, hold down the collet and withdraw the tube. Thread type Shape Thread size/tube size Thread size/tube size

1 Impact resistant PBT body in grey

2 Release buttons are grey

3 Stainless steel grab ring with special design to retain softer tube and provide easy releasability. 4 Silicon free U-packing provides leak tight tube seal under side loading. 5 Stem seal provides leak tight 360° swivel connection.

6 Nickel plated brass threads

7 Pre-applied thread sealant on tapered threads and recessed captive O-ring on parallel threads. Pneufit® M PUSH-IN fittings, metric > Port size: Ø 3, 4 and 6 mm O/D tube > Miniature Pneufit® M an ultra compact alternative where space is at a premium. > Releasable stainless- steel grab-ring to grip > PA or PUR tube (85 or 95 durometer). > Nickel plated brass components provide corrosion and contamination resistance and an extended life. > Pre applied thread sealant on all taper threads and recessed captive O-ring on parallel threads provides optimum rapid sealing.

Our policy is one of continued research and development. We therefore reserve the right to amend, Straight adaptors and connectors Straight union (equal) M0020 Page 3 Straight union (unequal) M0020 Page 3 Straight adaptor (external hex only) M0125/M0225 Page 3 Straight adaptor (internal hex only) M012A/M022A Page 3 Straight adaptor M0126/M0226 Page 3 Elbow adaptors and connectors Union elbow M0040 Page 3 90° Swivel elbow adaptor M0147/M0247 Page 3 Union tee M0060 Page 5 Swivel tee adaptor M0167/M0267 Page 5 Swivel side tee adaptor M0168/M0268 Page 5 Typical dimensions Ø A Ø K1 T X Y 3 7,5 11,5 7 9 4 8,5 12 8 10,5 6 11 13 10 12,5 B Recommended torque M3 0,7 Nm M5 1,5 Nm M6 2,3 Nm R1/8 7 Nm B T Y X ø K1 ø A Y connectors Union Y (equal) M0082 Page 5 Union Y (unequal) M0082 Page 5

Our policy is one of continued research and development. We therefore reserve the right to amend, Straight union M0020 Ø A C Model 3 23,5 M00200300 4 26 M00200400 6 26,5 M00200600 Ø A B C G Model

3 M3 17 4 1,5 M022A0303

3 M5 17,5 4,5 2 M022A0305

3 M6 18 5 2 M022A0306

4 M3 17,5 4 1,5 M022A0403

4 M5 19 4,5 2,5 M022A0405

4 M6 19 5 3 M022A0406

4 R1/8 17,5 8 3 M012A0418

6 M5 19,5 4,5 2,5 M022A0605

6 M6 20 5 3 M022A0606

6 R1/8 19,5 8 2,5 M012A0618

Ø A B C G Model

3 M3 17 4 7 M02250303

3 M5 17,5 4,5 8 M02250305

3 M6 18 5 8 M02250306

4 M3 17,5 4 8 M02250403

4 M5 18 4,5 8 M02250405

4 M6 19 5 8 M02250406

4 R1/8 19 6 12 M01250418

6 M5 19,5 4,5 10 M02250605

6 M6 20 5 10 M02250606

6 R1/8 19,5 8 12 M01250618

Straight adaptor (internal hex only) M012A, M022A Straight adaptor (external hex only) M0125, M0225 Straight adaptor (female thread) M0126, M0226 Ø A B C G Model

3 M3 17,5 4 8 M02260303

3 M5 19 6 8 M02260305

3 M6 19 6 8 M02260306

4 M3 18 4 8 M02260403

4 M5 19,5 6 8 M02260405

4 M6 19,5 6 8 M02260406

4 Rc1/8 23 8,5 12 M01260418

6 M5 21,5 6 10 M02260605

6 M6 21,5 6 10 M02260606

6 Rc1/8 25,5 8,5 12 M01260618

Ø A A1 C Model 4 3 24 M00200403 6 3 24 M00200603 6 4 26,5 M00200604 Union elbow M0040 Ø A Ø D E H O Model 3 3,2 13,5 5,5 7,5 M00400300 4 3,2 14,5 6 8,5 M00400400 6 3,2 16,5 7 10,5 M00400600 90° Swivel elbow adaptor M0147, M0247 Ø A B C E G Model

3 M3 15 13,5 3 8 M02470303

3 M5 15 13,5 4 8 M02470305

3 M6 16 13,5 4 8 M02470306

4 M3 15 14,5 3 8 M02470403

4 M5 16 14,5 4 8 M02470405

4 M6 16 14,5 4 8 M02470406

4 R1/8 16 14,5 8 10 M01470418

6 M5 17 15,5 3,5 8 M02470605

6 M6 17 15,5 4 8 M02470606

6 R1/8 17 15,5 8 10 M01470618

G C B ø A C ø A1 ø A C ø A G C ø A B E E ø A H O ø D E B C G ø A G C ø A B Dimensions in mm Projection/First angle

Our policy is one of continued research and development. We therefore reserve the right to amend, Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under »Technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. Diese Produkte sind ausschließlich in Druckluftsystemen zu verwenden. Sie sind dort einzusetzen, wo die unter »Technische Merkmal e/-Daten« aufg eführten Wert e n icht übe rschritten wer den. Berücksichtigen Sie bitte die entsprechende Katalogseite. Vor dem Einsatz der Produkte bei nicht industriellen Anwendungen, in lebenser- Anleitungsunterlagen enthalten sind, wenden Sie sich bitte direkt an Norgren. Durch Missbrauch, Verschleiß oder Störungen können in Pneumatik systemen verwendete Komponenten auf verschiedene Arten versagen. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. Systemauslegern wird dringend empfohlen, die Störungsarten aller in Pneumatiksystemen verwendeten Komponententeile zu berück- Verletzungen von Personen sowie Beschädigungen der Geräte im Falle einer solchen Störung zu verhindern. Systemausleger sind verpflichtet, Sicherheitshinweise für den End- benutzer im Betriebshandbuch zu vermerken, wenn der Störungs- schutz nicht ausreichend gewährleistet ist. Dimensions in mm Projection/First angle Union T M0060 Ø A C C1 Ø D E H O Model 3 26,5 13,5 3,2 5,5 5,5 7,5 M00600300 4 28,5 14,5 3,2 6 6 8,5 M00600400 6 33 16,5 3,2 7 7 10,5 M00600600 Swivel side tee adaptor M0168, M0268 Ø A B C C1 G Model

3 M3 13,5 29,5 3 8 M02680303

3 M5 13,5 30 4 8 M02680305

3 M6 13,5 30,5 4 8 M02680306

4 M3 14 30,5 3 8 M02680403

4 M5 14 31 3,5 8 M02680405

4 M6 14 31,5 4 8 M02680406

4 R1/8 14 31,5 6 14 M01680418

6 M5 16,5 33,5 3,5 8 M02680605

6 M6 16,5 34 4 8 M02680606

6 R1/8 16,5 33,5 6 14 M01680618

M0167, M0267 Ø A B C C1 G Model

3 M3 25,5 16 3 8 M02670303

3 M5 29 17 4 8 M02670305

3 M6 27 17 4 8 M02670306

4 M3 28,5 16 3 8 M02670403

4 M5 28,5 17 3,5 8 M02670405

4 M6 29 17 4 8 M02670406

4 R1/8 29 18 6 14 M01670418

6 M5 31 17 3,5 8 M02670605

6 M6 31 17 4 8 M02670606

6 R1/8 31 18 6 14 M01670618

Ø A C D H L O Model 3 27 3,2 11 8 7,5 M00820300 4 28 3,2 11,5 9 8,5 M00820400 6 31 3,2 12 11,5 11 M00820600 Unequal Ø A Ø A1 C D G L O Model 4 3 27,5 3,2 11 8 8,5 M00820403 6 3 28,5 3,2 11 8 11 M00820603 6 4 29 3,2 11,5 9 11 M00820604 Equal O ø D H C C 1 ø A ø A E E C 1 C B ø A ø A G C B G C 1 ø A G C L ø A ø A O ø D G C L ø A ø A1 O ø D