LWK212BJ106MD-T

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 48

Technical content

Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS ˙ Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be- fore practical application or usage of the Products. Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor- porating such products, which are caused under the conditions other than those specified in this catalog or indi- vidual specification. ˙ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification is available. ˙ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. ˙ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad- vance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma- rine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil- ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ˙ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu- tors (so called ʠTAIYO YUDENʟs official sales channelʡ). It is only applicable to the products purchased from any of TAIYO YUDENʟ s official sales channel. ˙ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights. ˙ Caution for export Certain items in this catalog may require specific procedures for export according to ʠForeign Exchange and For- eign Trade Control Lawʡ of Japan, ʠU.S. Export Administration Regulationsʡ, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS c_mlcc_e-E02R02 MULTILAYER CERAMIC CAPACITORS ■PARTS NUMBER J M K 3 1 6 △ B J 1 0 6 M L － T △ △＝Blank space ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ①Rated voltage Code Rated voltage［VDC］ P 2.5 A 4 J 6.3 L 10 E 16 T 25 G 35 U 50 H 100 Q 250 S 630 ②Series name Code Series name M Multilayer ceramic capacitor V Multilayer ceramic capacitor for high frequency W LW reverse type multilayer capacitor ③End termination Code End termination K Plated S Cu Internal Electrodes ④Dimension（L×W） Type Dimensions 042 0.4 × 0.2 01005 063 0.6 × 0.3 0201 105 1.0 × 0.5 0402 0.52× 1.0 ※ 0204 107 1.6 × 0.8 0603 0.8 × 1.6 ※ 0306 212 2.0 × 1.25 0805 1.25× 2.0 ※ 0508 316 3.2 × 1.6 1206 325 3.2 × 2.5 1210 432 4.5 × 3.2 1812 Note : ※LW reverse type（□WK） only ⑤Dimension tolerance △ ALL Standard Standard Standard A 0.45±0.05 0.85±0.10 1.25＋0.15/－0.05 1.6±0.20 B 0.8＋0.20/－0 1.25＋0.20/－0 N o t e : P . 6 S t a n d a r d e x t e r n a l d i m e n s i o n s △ = B l a n k s p a c e ⑥Temperature characteristics code ■High dielectric type（Excluding Super low distortion multilayer ceramic capacitor（CFCAP TM）） Code Applicable standard Temperature range［℃］ Ref. Temp.［℃］ Capacitance change Capacitance tolerance Tolerance code BJ ±20％ M ±20％ M ±20％ M ±20％ M ±20％ M ±20％ M Note : ※.LD Low distortion high value multilayer ceramic capaci t o r △ = B l a n k s p ace MULTILAYER CERAMIC CAPACITORS REFLOWWAVE

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS c_mlcc_e-E02R01 ■Temperature compensating type Code Applicable standard Temperature range［℃］ Ref. Temp.［℃］ Capacitance change Capacitance tolerance Tolerance code CG EIA C0G －55～＋125 25 0±60ppm/℃ ±0.1pF B ±0.25pF C ±0.5pF D ±1pF F ±5％ J CH JIS CH －55～＋125 0±60ppm/℃ ±0.1pF B ±0.25pF C ±0.5pF D EIA C0H 25 ±1pF F ±5％ J ±10％ K CJ JIS CJ －55～＋125 20 0±120ppm/℃ ±0.25pF C EIA C0J 25 CK JIS CK －55～＋125 20 0±250ppm/℃ ±0.25pF C EIA C0J 25 UJ JIS UJ －55～＋125 －750±120ppm/℃ ±0.25pF C EIA U2J 25 ±0.5pF D ±5％ J UK JIS UK －55～＋125 20 －750±250ppm/℃ ±0.5pF C EIA U2K －55～＋125 25 SL JIS SL －55～＋125 20 +350～－1000ppm/℃ ±5％ J ⑥Series code （Super low distortion multilayer ceramic capacitor（CFCAP TM）only） Code Series code SD Standard ⑦Nominal capacitance Code （example） Nominal capacitance 0R5 0.5pF 010 1pF 100 10pF 101 100pF 102 1,000pF 103 10,000pF 104 0.1μF 105 1.0μF 106 10μF 107 100μF Note : R＝Decimal point ⑧Capacitance tolerance Code Capacitance tolerance B ±0.1pF C ±0.25pF D ±0.5pF F ±1pF G ±2％ J ±5％ K ±10％ M ±20％ Z ＋80/－20％ ⑨Thickness Code Thickness［mm］ C 0.2 D P 0.3 T K 0.45 V 0.5 W A 0.8 D 0.85(212type or more) F 1.15 G 1.25 L 1.6 N 1.9 Y 2.0 max M 2.5 ⑩Special code Code Special code － Standard ⑪Packaging Code Packaging F φ178mm Taping （2mm pitch） T φ178mm Taping （4mm pitch） P φ178mm Taping （4mm pitch, 1000 pcs/reel） 325 type（Thickness code M） W φ178mm Taping（1mm pitch）042type only ⑫Internal code Code Internal code △ Standard

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS c_mlcc_e-E02R01 ■STANDARD EXTERNAL DIMENSIONS ※ LW reverse type Type( EIA ) Dimension [mm] Ｌ Ｗ T *1 e 0.2±0.02 C 0.5±0.05 V 0.45±0.05 K 1.25±0.10 G 0.85±0.10 D 1.25±0.10 G 1.6±0.20 L 0.85±0.10 D 0.6±0.3 1.15±0.10 F 1.9±0.20 N 1.9+0.1/-0.2 Y 2.5±0.20 M Note : ※. LW reverse type, *1.Thickness code ■STANDARD QUANTITY Type EIA（inch） Dimension Standard quantity［pcs］ ［ｍｍ］ Code Paper tape Embossed tape 042 01005 0.2 C － 40000 D 063 0201 0.3 P 15000 － T 105 0402

0.2 C 20000 －

0.3 P 15000 －

0.5 V 10000 － W 0204 ※ 0.30 P 107 0603 0.45 K 4000 － 0.8 A 0306 ※ 0.50 V － 4000 212 0805 0.45 K 4000 － 0.85 D

1.25 G － 3000

0508 ※ 0.85 D 4000 － 316 1206

0.85 D 4000 －

1.15 F － 3000 1.25 G

1.6 L － 2000

0.85 D － 2000 1.15 F 1.9 N 2.0 max Y 432 1812 2.5 M － 500 Note : ※.LW Reverse type（□WK） e

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER ・ All the Multilayer Ceramic Capacitors of Catalog Lineup are Compliance RoHS. ・ Capacitance tolerance code is applied to [] of part number. Note) *1 We may provide X7R/X7S for some items according to the ind ividual specification. *2 The exchange of individual specification is necessary depe nding on the application and circuit condition. Please contact TAIYO YUDEN sales channels. *3 The size standard should look at ④Dimension, ⑤Dimension to lerance, and ⑨Thickness, and P.6 Standard external dimensions. Multilayer Ceramic Capacitors (High dielectric type)

• 042TYPE 【Temperature Characteristic BJ : B/X5R】 0.2mm thickness（C） HTLT Rated voltage x ％ LMK042 BJ101[]C-W B X5R*1 100 p ±10，±20 5 200 0.2±0.02 R LMK042 BJ151[]C-W B X5R*1 150 p ±10，±20 5 200 0.2±0.02 R LMK042 BJ221[]C-W B X5R*1 220 p ±10，±20 5 200 0.2±0.02 R LMK042 BJ331[]C-W B X5R*1 330 p ±10，±20 5 200 0.2±0.02 R LMK042 BJ471[]C-W B X5R*1 470 p ±10，±20 5 200 0.2±0.02 R LMK042 BJ681[]C-W B X5R*1 680 p ±10，±20 5 200 0.2±0.02 R LMK042 BJ102[]C-W B X5R*1 1000 p ±10，±20 5 200 0.2±0.02 R LMK042 BJ152[]C-W X5R 1500 p ±10，±20 10 150 0.2±0.02 R LMK042 BJ222[]C-W X5R 2200 p ±10，±20 10 150 0.2±0.02 R LMK042 BJ332[]C-W X5R 3300 p ±10，±20 10 150 0.2±0.02 R LMK042 BJ472[]C-W X5R 4700 p ±10，±20 10 150 0.2±0.02 R LMK042 BJ682[]C-W X5R 6800 p ±10，±20 10 150 0.2±0.02 R LMK042 BJ103[]C-W X5R 10000 p ±10，±20 10 150 0.2±0.02 R JMK042 BJ152[]C-W B X5R*1 1500 p ±10，±20 10 150 0.2±0.02 R JMK042 BJ222[]C-W B X5R*1 2200 p ±10，±20 10 150 0.2±0.02 R JMK042 BJ332[]C-W B X5R*1 3300 p ±10，±20 10 150 0.2±0.02 R JMK042 BJ472[]C-W B X5R*1 4700 p ±10，±20 10 150 0.2±0.02 R JMK042 BJ682[]C-W B X5R*1 6800 p ±10，±20 10 150 0.2±0.02 R JMK042 BJ103[]C-W B X5R*1 10000 p ±10，±20 10 150 0.2±0.02 R JMK042 BJ223[]C-W X5R 22000 p ±10，±20 10 150 0.2±0.02 R JMK042 BJ473[]C-W X5R 47000 p ±10，±20 10 150 0.2±0.02 R AMK042 BJ473[]C-W X5R 47000 p ±10，±20 10 150 0.2±0.02 R AMK042 BJ104[]C-W X5R 0.1 μ ±10，±20 10 150 0.2±0.02 R 【Temperature Characteristic B7 : X7R】 0.2mm thickness（C） HTLT Rated voltage x ％ EMK042 B7101[]C-W X7R 100 p ±10，±20 5 200 0.2±0.02 R EMK042 B7151[]C-W X7R 150 p ±10，±20 5 200 0.2±0.02 R EMK042 B7221[]C-W X7R 220 p ±10，±20 5 200 0.2±0.02 R EMK042 B7331[]C-W X7R 330 p ±10，±20 5 200 0.2±0.02 R EMK042 B7471[]C-W X7R 470 p ±10，±20 5 200 0.2±0.02 R EMK042 B7681[]C-W X7R 680 p ±10，±20 5 200 0.2±0.02 R EMK042 B7102[]C-W X7R 1000 p ±10，±20 5 200 0.2±0.02 R LMK042 B7101[]C-W X7R 100 p ±10，±20 5 200 0.2±0.02 R LMK042 B7151[]C-W X7R 150 p ±10，±20 5 200 0.2±0.02 R LMK042 B7221[]C-W X7R 220 p ±10，±20 5 200 0.2±0.02 R LMK042 B7331[]C-W X7R 330 p ±10，±20 5 200 0.2±0.02 R LMK042 B7471[]C-W X7R 470 p ±10，±20 5 200 0.2±0.02 R LMK042 B7681[]C-W X7R 680 p ±10，±20 5 200 0.2±0.02 R LMK042 B7102[]C-W X7R 1000 p ±10，±20 5 200 0.2±0.02 R
• 063TYPE 【Temperature Characteristic BJ : B/X5R】 0.3mm thickness（P） HTLT Rated voltage x ％ UMK063 BJ101[]P-F B X5R*1 100 p ±10，±20 3.5 200 0.3±0.03 R UMK063 BJ151[]P-F B X5R*1 150 p ±10，±20 3.5 200 0.3±0.03 R UMK063 BJ221[]P-F B X5R*1 220 p ±10，±20 3.5 200 0.3±0.03 R UMK063 BJ331[]P-F B X5R*1 330 p ±10，±20 3.5 200 0.3±0.03 R UMK063 BJ471[]P-F B X5R*1 470 p ±10，±20 3.5 200 0.3±0.03 R UMK063 BJ681[]P-F B X5R*1 680 p ±10，±20 3.5 200 0.3±0.03 R UMK063 BJ102[]P-F B X5R*1 1000 p ±10，±20 3.5 200 0.3±0.03 R UMK063 BJ152[]P-F B X5R 1500 p ±10，±20 5 200 0.3±0.03 R UMK063 BJ222[]P-F B X5R 2200 p ±10，±20 5 200 0.3±0.03 R UMK063 BJ332[]P-F B X5R 3300 p ±10，±20 5 200 0.3±0.03 R UMK063 BJ472[]P-F B X5R 4700 p ±10，±20 5 200 0.3±0.03 R UMK063 BJ682[]P-F B X5R 6800 p ±10，±20 5 200 0.3±0.03 R UMK063 BJ103[]P-F B X5R 10000 p ±10，±20 5 200 0.3±0.03 R TMK063 BJ152[]P-F B X5R 1500 p ±10，±20 5 200 0.3±0.03 R TMK063 BJ222[]P-F B X5R 2200 p ±10，±20 5 200 0.3±0.03 R TMK063 BJ332[]P-F B X5R 3300 p ±10，±20 5 200 0.3±0.03 R TMK063 BJ472[]P-F B X5R 4700 p ±10，±20 5 200 0.3±0.03 R TMK063 BJ682[]P-F B X5R 6800 p ±10，±20 5 200 0.3±0.03 R TMK063 BJ103[]P-F B X5R 10000 p ±10，±20 5 200 0.3±0.03 R TMK063 BJ223[]P-F B X5R 22000 p ±10，±20 7.5 150 0.3±0.03 R EMK063 BJ152[]P-F B X5R*1 1500 p ±10，±20 5 200 0.3±0.03 R EMK063 BJ222[]P-F B X5R*1 2200 p ±10，±20 5 200 0.3±0.03 R EMK063 BJ332[]P-F B X5R*1 3300 p ±10，±20 5 200 0.3±0.03 R EMK063 BJ472[]P-F B X5R*1 4700 p ±10，±20 5 200 0.3±0.03 R EMK063 BJ682[]P-F B X5R*1 6800 p ±10，±20 5 200 0.3±0.03 R EMK063 BJ103[]P-F B X5R*1 10000 p ±10，±20 5 200 0.3±0.03 R EMK063 BJ223[]P-F B X5R 22000 p ±10，±20 7.5 150 0.3±0.03 R EMK063 BJ333[]P-F X5R 33000 p ±10，±20 7.5 150 0.3±0.03 R EMK063 BJ473[]P-F X5R 47000 p ±10，±20 7.5 150 0.3±0.03 R EMK063 BJ683[]P-F X5R 68000 p ±10，±20 10 150 0.3±0.03 R EMK063 BJ104[]P-F X5R 0.1 μ ±10，±20 10 150 0.3±0.03 R EMK063 BJ224[]P-F X5R 0.22 μ ±10，±20 10 150 0.3±0.03 R 6.3 Rated voltage [V] Rated voltage [V] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave tanδ [％] Thickness*3 [mm] Part number 1 Capacitance [F] Capacitance tolerance [％] Capacitance [F] Temperature characteristics Capacitance tolerance [％] Part number 1 Part number 2 Temperature characteristicsPart number 1 Part number 2 Part number 2 tanδ [％] Thickness*3 [mm]Rated voltage [V] Temperature characteristics Capacitance [F] Capacitance tolerance [％] Thickness*3 [mm] Soldering R:Reflow W:Wave tanδ [％] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ LMK063 BJ223[]P-F B X5R 22000 p ±10，±20 7.5 150 0.3±0.03 R LMK063 BJ333[]P-F X5R 33000 p ±10，±20 7.5 150 0.3±0.03 R LMK063 BJ473[]P-F X5R 47000 p ±10，±20 7.5 150 0.3±0.03 R LMK063 BJ683[]P-F X5R 68000 p ±10，±20 10 150 0.3±0.03 R LMK063 BJ104[]P-F X5R 0.1 μ ±10，±20 10 150 0.3±0.03 R LMK063 BJ224[]P-F X5R 0.22 μ ±10，±20 10 150 0.3±0.03 R JMK063 BJ223[]P-F B X5R 22000 p ±10，±20 7.5 150 0.3±0.03 R JMK063 BJ333[]P-F X5R 33000 p ±10，±20 7.5 150 0.3±0.03 R JMK063 BJ473[]P-F X5R 47000 p ±10，±20 7.5 150 0.3±0.03 R JMK063 BJ683[]P-F X5R 68000 p ±10，±20 10 150 0.3±0.03 R JMK063 BJ104[]P-F X5R 0.1 μ ±10，±20 10 150 0.3±0.03 R JMK063 BJ224[]P-F X5R 0.22 μ ±10，±20 10 150 0.3±0.03 R JMK063 BJ474[]P-F X5R 0.47 μ ±10，±20 10 150 0.3±0.03 R JMK063ABJ105MP-F X5R 1 μ ±20 10 150 0.3±0.05 R AMK063 BJ224[]P-F X5R 0.22 μ ±10，±20 10 150 0.3±0.03 R AMK063 BJ474MP-F X5R 0.47 μ ±20 10 150 0.3±0.03 R AMK063ABJ105MP-F X5R 1 μ ±20 10 150 0.3±0.05 R 【Temperature Characteristic C6 : X6S】 0.3mm thickness（P） HTLT Rated voltage x ％ LMK063 C6333[]P-F X6S 33000 p ±10，±20 7.5 150 0.3±0.03 R LMK063 C6473[]P-F X6S 47000 p ±10，±20 7.5 150 0.3±0.03 R LMK063 C6683[]P-F X6S 68000 p ±10，±20 10 150 0.3±0.03 R LMK063 C6104[]P-F X6S 0.1 μ ±10，±20 10 150 0.3±0.03 R LMK063 C6224[]P-F X6S 0.22 μ ±10，±20 10 150 0.3±0.03 R JMK063 C6333[]P-F X6S 33000 p ±10，±20 7.5 150 0.3±0.03 R JMK063 C6473[]P-F X6S 47000 p ±10，±20 7.5 150 0.3±0.03 R JMK063 C6683[]P-F X6S 68000 p ±10，±20 10 150 0.3±0.03 R JMK063 C6104[]P-F X6S 0.1 μ ±10，±20 10 150 0.3±0.03 R JMK063 C6224[]P-F X6S 0.22 μ ±10，±20 10 150 0.3±0.03 R AMK063 C6474MP-F X6S 0.47 μ ±20 10 150 0.3±0.03 R AMK063AC6105MP-F X6S 1 μ ±20 10 150 0.3±0.05 R 【Temperature Characteristic B7 : X7R】 0.3mm thickness（P） HTLT Rated voltage x ％ UMK063 B7101[]P-F X7R 100 p ±10，±20 3.5 200 0.3±0.03 R UMK063 B7151[]P-F X7R 150 p ±10，±20 3.5 200 0.3±0.03 R UMK063 B7221[]P-F X7R 220 p ±10，±20 3.5 200 0.3±0.03 R UMK063 B7331[]P-F X7R 330 p ±10，±20 3.5 200 0.3±0.03 R UMK063 B7471[]P-F X7R 470 p ±10，±20 3.5 200 0.3±0.03 R UMK063 B7681[]P-F X7R 680 p ±10，±20 3.5 200 0.3±0.03 R UMK063 B7102[]P-F X7R 1000 p ±10，±20 3.5 200 0.3±0.03 R TMK063 B7152[]P-F X7R 1500 p ±10，±20 5 200 0.3±0.03 R TMK063 B7222[]P-F X7R 2200 p ±10，±20 5 200 0.3±0.03 R TMK063 B7332[]P-F X7R 3300 p ±10，±20 5 200 0.3±0.03 R TMK063 B7472[]P-F X7R 4700 p ±10，±20 5 200 0.3±0.03 R TMK063 B7682[]P-F X7R 6800 p ±10，±20 5 200 0.3±0.03 R TMK063 B7103[]P-F X7R 10000 p ±10，±20 5 200 0.3±0.03 R EMK063 B7152[]P-F X7R 1500 p ±10，±20 5 200 0.3±0.03 R EMK063 B7222[]P-F X7R 2200 p ±10，±20 5 200 0.3±0.03 R EMK063 B7332[]P-F X7R 3300 p ±10，±20 5 200 0.3±0.03 R EMK063 B7472[]P-F X7R 4700 p ±10，±20 5 200 0.3±0.03 R EMK063 B7682[]P-F X7R 6800 p ±10，±20 5 200 0.3±0.03 R EMK063 B7103[]P-F X7R 10000 p ±10，±20 5 200 0.3±0.03 R EMK063 B7223[]P-F X7R 22000 p ±10，±20 7.5 150 0.3±0.03 R

• 105TYPE 【Temperature Characteristic BJ : B/X5R】 0.5mm thickness（V） HTLT Rated voltage x ％ UMK105 BJ221[]V-F B X5R*1 220 p ±10，±20 2.5 200 0.5±0.05 R UMK105 BJ331[]V-F B X5R*1 330 p ±10，±20 2.5 200 0.5±0.05 R UMK105 BJ471[]V-F B X5R*1 470 p ±10，±20 2.5 200 0.5±0.05 R UMK105 BJ681[]V-F B X5R*1 680 p ±10，±20 2.5 200 0.5±0.05 R UMK105 BJ102[]V-F B X5R*1 1000 p ±10，±20 2.5 200 0.5±0.05 R UMK105 BJ152[]V-F B X5R*1 1500 p ±10，±20 2.5 200 0.5±0.05 R UMK105 BJ222[]V-F B X5R*1 2200 p ±10，±20 2.5 200 0.5±0.05 R UMK105 BJ332[]V-F B X5R*1 3300 p ±10，±20 2.5 200 0.5±0.05 R UMK105 BJ472[]V-F B X5R*1 4700 p ±10，±20 2.5 200 0.5±0.05 R UMK105 BJ682[]V-F B X5R*1 6800 p ±10，±20 2.5 150 0.5±0.05 R UMK105 BJ103[]V-F B X5R*1 10000 p ±10，±20 3.5 200 0.5±0.05 R UMK105 BJ104[]V-F X5R 0.1 μ ±10，±20 10 150 0.5±0.05 R UMK105 BJ224[]V-F X5R 0.22 μ ±10，±20 10 150 0.5±0.05 R UMK105ABJ474[]V-F X5R 0.47 μ ±10，±20 10 150 0.5±0.10 R GMK105 BJ104[]V-F 35 B X5R 0.1 μ ±10，±20 5 150 0.5±0.05 R TMK105 BJ153[]V-F B X5R*1 15000 p ±10，±20 3.5 200 0.5±0.05 R TMK105 BJ223[]V-F B X5R*1 22000 p ±10，±20 3.5 200 0.5±0.05 R TMK105 BJ333[]V-F B X5R*1 33000 p ±10，±20 3.5 150 0.5±0.05 R TMK105 BJ473[]V-F B X5R*1 47000 p ±10，±20 3.5 150 0.5±0.05 R TMK105 BJ104[]V-F B X5R 0.1 μ ±10，±20 5 150 0.5±0.05 R ＴMK105 BJ224[]V-F X5R 0.22 μ ±10，±20 10 200 0.5±0.05 R ＴMK105ABJ474[]V-F X5R 0.47 μ ±10，±20 10 200 0.5±0.10 R TMK105 BJ105[]V-F X5R 1 μ ±10，±20 10 150 0.5±0.05 R TMK105CBJ225MV-F X5R 2.2 μ ±20 10 150 0.5+0.20/-0 R Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Capacitance [F] Capacitance tolerance [％] tanδ [％] Thickness*3 [mm] Capacitance tolerance [％] Capacitance [F]Part number 1 Temperature characteristics Capacitance tolerance [％] Capacitance tolerance [％] tanδ [％] Soldering R:Reflow W:Wave tanδ [％] Thickness*3 [mm] Soldering R:Reflow W:Wave Thickness*3 [mm] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave tanδ [％] Thickness*3 [mm] Temperature characteristicsPart number 2 Rated voltage [V] Part number 1 Part number 2 Rated voltage [V] Part number 1 Part number 2 Capacitance [F] Capacitance [F] Temperature characteristics 6.3 Rated voltage [V] 6.3 c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ EMK105 BJ153[]V-F B X5R*1 15000 p ±10，±20 3.5 200 0.5±0.05 R EMK105 BJ223[]V-F B X5R*1 22000 p ±10，±20 3.5 200 0.5±0.05 R EMK105 BJ333[]V-F B X5R*1 33000 p ±10，±20 3.5 200 0.5±0.05 R EMK105 BJ473[]V-F B X5R*1 47000 p ±10，±20 3.5 200 0.5±0.05 R EMK105 BJ683[]V-F B X5R 68000 p ±10，±20 5 200 0.5±0.05 R EMK105 BJ104[]V-F B X5R*1 0.1 μ ±10，±20 5 150 0.5±0.05 R EMK105 BJ224[]V-F B X5R 0.22 μ ±10，±20 5 150 0.5±0.05 R EMK105ABJ474[]V-F X5R 0.47 μ ±10，±20 10 150 0.5±0.10 R EMK105 BJ105[]V-F X5R 1 μ ±10，±20 10 150 0.5±0.05 R EMK105ABJ225MV-F X5R 2.2 μ ±20 10 150 0.5±0.10 R LMK105 BJ104[]V-F B X5R 0.1 μ ±10，±20 5 200 0.5±0.05 R LMK105 BJ224[]V-F B X5R 0.22 μ ±10，±20 5 150 0.5±0.05 R LMK105 BJ474[]V-F X5R 0.47 μ ±10，±20 10 150 0.5±0.05 R LMK105 BJ105[]V-F X5R 1 μ ±10，±20 10 150 0.5±0.05 R LMK105 BJ225MV-F X5R 2.2 μ ±20 10 150 0.5±0.05 R LMK105BBJ475MVLF X5R 4.7 μ ±20 10 150 0.5+0.15/-0.05 R JMK105 BJ224[]V-F B X5R 0.22 μ ±10，±20 5 150 0.5±0.05 R JMK105 BJ474[]V-F X5R 0.47 μ ±10，±20 10 150 0.5±0.05 R JMK105 BJ105[]V-F X5R 1 μ ±10，±20 10 150 0.5±0.05 R JMK105 BJ225MV-F X5R 2.2 μ ±20 10 150 0.5±0.05 R JMK105BBJ475MV-F JMK105 BJ475MV-FD X5R 4.7 μ ±20 10 150 0.5+0.15/-0.05 R AMK105 BJ335MV-F X5R 3.3 μ ±20 10 150 0.5±0.05 R AMK105ABJ475MV-F AMK105 BJ475MV-F X5R 4.7 μ ±20 10 150 0.5±0.10 R AMK105CBJ106MV-F X5R 10 μ ±20 10 150 0.5+0.20/-0 R 【Temperature Characteristic BJ : B/X5R】 0.3mm thickness（P） HTLT Rated voltage x ％ TMK105 BJ103[]P-F B X5R 10000 p ±10，±20 5 150 0.3±0.03 R TMK105 BJ104[]P-F X5R 0.1 μ ±10，±20 10 150 0.3±0.03 R TMK105 BJ224[]P-F X5R 0.22 μ ±10，±20 10 150 0.3±0.03 R TMK105 BJ474[]P-F X5R 0.47 μ ±10，±20 10 150 0.3±0.03 R EMK105 BJ474[]P-F 16 X5R 0.47 μ ±10，±20 10 150 0.3±0.03 R LMK105 BJ105[]PLF 10 X5R 1 μ ±10，±20 10 150 0.3±0.03 R JMK105 BJ105[]P-F 6.3 X5R 1 μ ±10，±20 10 150 0.3±0.03 R AMK105 BJ225MP-F 4 X5R 2.2 μ ±20 10 150 0.3±0.03 R 【Temperature Characteristic BJ : X5R】 0.2mm thickness（C） HTLT Rated voltage x ％ LMK105 BJ104[]C-F 10 X5R 0.1 μ ±10，±20 10 150 0.2±0.02 R JMK105 BJ224[]C-F X5R 0.22 μ ±10，±20 10 150 0.2±0.02 R JMK105 BJ474[]C-F X5R 0.47 μ ±10，±20 10 150 0.2±0.02 R JMK105 BJ105MC-F X5R 1 μ ±20 10 150 0.2±0.02 R 【Temperature Characteristic C6 : X6S】 0.5mm thickness（V） HTLT Rated voltage x ％ EMK105 C6105[]V-F 16 X6S 1 μ ±10，±20 10 150 0.5±0.05 R EMK105CC6225MV-F X6S 2.2 μ ±20 10 150 0.5+0.20/-0 R LMK105 C6105[]V-F X6S 1 μ ±10，±20 10 200 0.5±0.05 R LMK105AC6225MV-F X6S 2.2 μ ±20 10 150 0.5±0.10 R JMK105 C6105[]V-F X6S 1 μ ±10，±20 10 150 0.5±0.05 R JMK105 C6225MV-F X6S 2.2 μ ±20 10 150 0.5±0.05 R JMK105BC6475MV-F X6S 4.7 μ ±20 10 150 0.5+0.15/-0.05 R AMK105BC6475MV-F 4 X6S 4.7 μ ±20 10 150 0.5+0.15/-0.05 R 【Temperature Characteristic B7 : X7R】 0.5mm thickness（V） HTLT Rated voltage x ％ UMK105 B7221[]V-F X7R 220 p ±10，±20 2.5 200 0.5±0.05 R UMK105 B7331[]V-F X7R 330 p ±10，±20 2.5 200 0.5±0.05 R UMK105 B7471[]V-F X7R 470 p ±10，±20 2.5 200 0.5±0.05 R UMK105 B7681[]V-F X7R 680 p ±10，±20 2.5 200 0.5±0.05 R UMK105 B7102[]V-F X7R 1000 p ±10，±20 2.5 200 0.5±0.05 R UMK105 B7152[]V-F X7R 1500 p ±10，±20 2.5 200 0.5±0.05 R UMK105 B7222[]V-F X7R 2200 p ±10，±20 2.5 200 0.5±0.05 R UMK105 B7332[]V-F X7R 3300 p ±10，±20 2.5 200 0.5±0.05 R UMK105 B7472[]V-F X7R 4700 p ±10，±20 2.5 200 0.5±0.05 R UMK105 B7682[]V-F X7R 6800 p ±10，±20 2.5 200 0.5±0.05 R UMK105 B7103[]V-F X7R 10000 p ±10，±20 3.5 200 0.5±0.05 R UMK105 B7104[]V-FR X7R 0.1 μ ±10，±20 10 150 0.5±0.05 R TMK105 B7152[]V-F X7R 1500 p ±10，±20 2.5 200 0.5±0.05 R TMK105 B7222[]V-F X7R 2200 p ±10，±20 2.5 200 0.5±0.05 R TMK105 B7332[]V-F X7R 3300 p ±10，±20 2.5 200 0.5±0.05 R TMK105 B7472[]V-F X7R 4700 p ±10，±20 2.5 200 0.5±0.05 R TMK105 B7682[]V-F X7R 6800 p ±10，±20 2.5 200 0.5±0.05 R TMK105 B7103[]V-F X7R 10000 p ±10，±20 3.5 200 0.5±0.05 R TMK105 B7104[]V-FR X7R 0.1 μ ±10，±20 10 200 0.5±0.05 R TMK105 B7224[]V-FR X7R 0.22 μ ±10，±20 10 150 0.5±0.05 R EMK105 B7223[]V-F X7R 22000 p ±10，±20 3.5 200 0.5±0.05 R EMK105 B7473[]V-F X7R 47000 p ±10，±20 3.5 200 0.5±0.05 R EMK105 B7104[]V-F X7R 0.1 μ ±10，±20 5 150 0.5±0.05 R EMK105 B7224[]V-FR X7R 0.22 μ ±10，±20 10 150 0.5±0.05 R Soldering R:Reflow W:Wave 6.3 Capacitance tolerance [％] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Capacitance tolerance [％] Rated voltage [V] Temperature characteristics Thickness*3 [mm] Capacitance [F] Capacitance [F] Capacitance tolerance [％] Capacitance tolerance [％] tanδ [％] tanδ [％] Capacitance [F] Part number 1 Thickness*3 [mm] Thickness*3 [mm] Temperature characteristics Capacitance tolerance [％] Capacitance [F] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave tanδ [％] Thickness*3 [mm] Part number 1 tanδ [％] Thickness*3 [mm] Part number 2 6.3 Part number 1 Part number 2 Part number 2 Rated voltage [V] Part number 1 Part number 2 Rated voltage [V] Rated voltage [V] Rated voltage [V] Part number 2 Part number 1 Temperature characteristics Capacitance [F] Temperature characteristics Temperature characteristics tanδ [％] 6.3 c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ LMK105 B7223[]V-F X7R 22000 p ±10，±20 3.5 200 0.5±0.05 R LMK105 B7473[]V-F X7R 47000 p ±10，±20 3.5 200 0.5±0.05 R LMK105 B7104[]V-F X7R 0.1 μ ±10，±20 5 150 0.5±0.05 R LMK105 B7224[]V-FR X7R 0.22 μ ±10，±20 10 150 0.5±0.05 R LMK105 B7474[]V-F X7R 0.47 μ ±10，±20 10 150 0.5±0.05 R JMK105 B7224[]V-F X7R 0.22 μ ±10，±20 5 150 0.5±0.05 R JMK105 B7474[]V-F X7R 0.47 μ ±10，±20 10 150 0.5±0.05 R 【Temperature Characteristic F : F/Y5V】 0.5mm thickness（V） HTLT Rated voltage x ％ UMK105 F103ZV-F 50 F Y5V 10000 p ＋80/-20 5 200 0.5±0.05 R TMK105 F223ZV-F 25 F Y5V 22000 p ＋80/-20 5 200 0.5±0.05 R EMK105 F473ZV-F F Y5V 47000 p ＋80/-20 7 200 0.5±0.05 R EMK105 F104ZV-F F Y5V 0.1 μ ＋80/-20 9 200 0.5±0.05 R LMK105 F224ZV-F 10 F Y5V 0.22 μ ＋80/-20 11 200 0.5±0.05 R JMK105 F474ZV-F F Y5V 0.47 μ ＋80/-20 12.5 200 0.5±0.05 R JMK105 F105ZV-F F Y5V 1 μ ＋80/-20 20 150 0.5±0.05 R

• 107TYPE 【Temperature Characteristic BJ : B/X5R】 0.8mm thickness（A） HTLT Rated voltage x ％ UMK107ABJ474[]A-T UMK107 BJ474[]A-TD X5R 0.47 μ ±10，±20 10 150 0.8+0.15 /-0.05 R UMK107 BJ105[]A-T X5R 1 μ ±10，±20 10 150 0.8±0.10 R UMK107BBJ225[]A-T X5R 2.2 μ ±10，±20 10 150 0.8+0.20/-0 R GMK107 BJ105[]A-T 35 B X5R 1 μ ±10，±20 5 150 0.8±0.10 R TMK107 BJ224[]A-T B X5R 0.22 μ ±10，±20 3.5 200 0.8±0.10 R/W TMK107 BJ474[]A-T B X5R 0.47 μ ±10，±20 3.5 150 0.8±0.10 R TMK107 BJ105[]A-T B X5R 1 μ ±10，±20 5 150 0.8±0.10 R TMK107ABJ225[]A-T TMK107 BJ225[]A-TD X5R 2.2 μ ±10，±20 10 150 0.8+0.15/ -0.05 R EMK107 BJ224[]A-T B X5R*1 0.22 μ ±10，±20 3.5 200 0.8±0.10 R/W EMK107 BJ474[]A-T B X5R*1 0.47 μ ±10，±20 3.5 200 0.8±0.10 R EMK107 BJ105[]A-T B X5R*1 1 μ ±10，±20 5 150 0.8±0.10 R EMK107 BJ225[]A-T B X5R 2.2 μ ±10，±20 10 150 0.8±0.10 R EMK107ABJ475[]A-T EMK107 BJ475[]A-TD X5R 4.7 μ ±10，±20 10 150 0.8+0.15/ -0.05 R EMK107BBJ106MA-T X5R 10 μ ±20 10 150 0.8+0.20/-0 R LMK107 BJ224[]A-T B X5R*1 0.22 μ ±10，±20 3.5 200 0.8±0.10 R/W LMK107 BJ474[]A-T B X5R*1 0.47 μ ±10，±20 3.5 200 0.8±0.10 R LMK107 BJ105[]A-T B X5R*1 1 μ ±10，±20 5 200 0.8±0.10 R LMK107 BJ225[]A-T B X5R 2.2 μ ±10，±20 10 150 0.8±0.10 R LMK107 BJ475[]A-T X5R 4.7 μ ±10，±20 10 150 0.8±0.10 R LMK107BBJ106MALT LMK107 BJ106MALTD X5R 10 μ ±20 10 150 0.8+0.20/-0 R JMK107 BJ225[]A-T B X5R 2.2 μ ±10，±20 10 150 0.8±0.10 R JMK107 BJ475[]A-T X5R 4.7 μ ±10，±20 10 150 0.8±0.10 R JMK107ABJ106MA-T JMK107 BJ106MA-T X5R 10 μ ±20 10 150 0.8+0.15/-0.05 R AMK107 BJ106MA-T X5R 10 μ ±20 10 150 0.8±0.10 R AMK107BBJ226MA-T AMK107 BJ226MA-T X5R 22 μ ±20 10 150 0.8+0.20/-0 R 【Temperature Characteristic BJ : B/X5R】 0.45mm thickness（K） HTLT Rated voltage x ％ TMK107 BJ105[]K-T 25 X5R 1 μ ±10，±20 10 150 0.45±0.05 R EMK107 BJ105[]K-T X5R 1 μ ±10，±20 10 150 0.45±0.05 R EMK107BBJ225[]K-T X5R 2.2 μ ±10，±20 10 150 0.45±0.05 R LMK107 BJ105[]K-T B X5R 1 μ ±10，±20 10 150 0.45±0.05 R LMK107 BJ225[]K-T X5R 2.2 μ ±10，±20 10 150 0.45±0.05 R LMK107BBJ475MKLT LMK107 BJ475MKLTD X5R 4.7 μ ±20 10 150 0.45±0.05 R JMK107 BJ105[]K-T B X5R 1 μ ±10，±20 10 150 0.45±0.05 R JMK107 BJ225[]K-T X5R 2.2 μ ±10，±20 10 150 0.45±0.05 R JMK107 BJ475MK-T X5R 4.7 μ ±20 10 150 0.45±0.05 R JMK107BBJ106MK-T X5R 10 μ ±20 10 150 0.45±0.05 R AMK107BBJ106MK-T 4 X5R 10 μ ±20 10 150 0.45±0.05 R 【Temperature Characteristic C6 : X6S】 0.8mm thickness（A） HTLT Rated voltage x ％ EMK107 C6105[]A-T 16 X6S 1 μ ±10，±20 5 150 0.8±0.10 R LMK107 C6105[]A-T X6S 1 μ ±10，±20 5 150 0.8±0.10 R LMK107AC6475[]A-T X6S 4.7 μ ±10，±20 10 150 0.8+0.15/-0.05 R LMK107BC6106MA-T X6S 10 μ ±20 10 150 0.8+0.20/-0 R JMK107 C6105[]A-T X6S 1 μ ±10，±20 5 150 0.8±0.10 R JMK107 C6475[]A-T X6S 4.7 μ ±10，±20 10 150 0.8±0.10 R JMK107BC6106MA-T X6S 10 μ ±20 10 150 0.8+0.20/-0 R AMK107AC6106MA-T 4 X6S 10 μ ±20 10 150 0.8+0.15/-0.05 R 【Temperature Characteristic B7 : X7R】 0.8mm thickness（A） HTLT Rated voltage x ％ UMK107 B7224[]A-TR X7R 0.22 μ ±10，±20 10 150 0.8±0.10 R UMK107 B7474[]A-TR X7R 0.47 μ ±10，±20 10 150 0.8±0.10 R UMK107AB7105[]A-T X7R 1 μ ±10，±20 10 150 0.8+0.15/-0.05 R TMK107 B7474[]A-TR X7R 0.47 μ ±10，±20 10 150 0.8±0.10 R TMK107 B7105[]A-T X7R 1 μ ±10，±20 10 150 0.8±0.10 R Temperature characteristics Capacitance tolerance [％] Capacitance [F] Capacitance tolerance [％] tanδ [％] Temperature characteristics Rated voltage [V]Part number 2 Temperature characteristics tanδ [％] Capacitance tolerance [％] tanδ [％] Capacitance tolerance [％] Thickness*3 [mm] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave tanδ [％] Thickness*3 [mm] Soldering R:Reflow W:Wave Thickness*3 [mm] Thickness*3 [mm] Soldering R:Reflow W:Wave Thickness*3 [mm] Capacitance tolerance [％] tanδ [％] Soldering R:Reflow W:Wave tanδ [％] Capacitance tolerance [％] Part number 1 Part number 1 Capacitance [F] Capacitance [F] Capacitance [F] Capacitance [F] Thickness*3 [mm] Temperature characteristics Capacitance [F] Part number 1 Rated voltage [V] Part number 1 Part number 2 Part number 1 Part number 2 Part number 2 Part number 1 Part number 2 Part number 2 Rated voltage [V] 6.3 6.3 Temperature characteristics 6.3 Temperature characteristics Rated voltage [V] 6.3 Rated voltage [V] Rated voltage [V] 6.3 c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ EMK107 B7224[]A-T X7R 0.22 μ ±10，±20 3.5 150 0.8±0.10 R/W EMK107 B7474[]A-T X7R 0.47 μ ±10，±20 3.5 150 0.8±0.10 R EMK107 B7105[]A-T X7R 1 μ ±10，±20 5 150 0.8±0.10 R EMK107BB7225[]A-T X7R 2.2 μ ±10，±20 10 150 0.8+0.20/-0 R LMK107 B7224[]A-T X7R 0.22 μ ±10，±20 3.5 200 0.8±0.10 R/W LMK107 B7474[]A-T X7R 0.47 μ ±10，±20 3.5 200 0.8±0.10 R LMK107 B7105[]A-T X7R 1 μ ±10，±20 5 150 0.8±0.10 R LMK107 B7225[]A-TR X7R 2.2 μ ±10，±20 10 150 0.8±0.10 R JMK107 B7224[]A-T X7R 0.22 μ ±10，±20 3.5 200 0.8±0.10 R/W JMK107 B7474[]A-T X7R 0.47 μ ±10，±20 3.5 200 0.8±0.10 R JMK107 B7105[]A-T X7R 1 μ ±10，±20 5 150 0.8±0.10 R 【Temperature Characteristic F : F/Y5V】 0.8mm thickness（A） HTLT Rated voltage x ％ UMK107 F104ZA-T 50 F Y5V 0.1 μ ＋80/-20 7 200 0.8±0.10 R/W TMK107 F474ZA-T 25 F Y5V 0.47 μ ＋80/-20 7 200 0.8±0.10 R/W EMK107 F224ZA-T F Y5V 0.22 μ ＋80/-20 7 200 0.8±0.10 R/W EMK107 F474ZA-T F Y5V 0.47 μ ＋80/-20 7 200 0.8±0.10 R/W EMK107 F105ZA-T F Y5V 1 μ ＋80/-20 16 200 0.8±0.10 R EMK107 F225ZA-T F Y5V 2.2 μ ＋80/-20 16 200 0.8±0.10 R LMK107 F105ZA-T F Y5V 1 μ ＋80/-20 16 200 0.8±0.10 R LMK107 F225ZA-T F Y5V 2.2 μ ＋80/-20 16 200 0.8±0.10 R

• 212TYPE 【Temperature Characteristic BJ : B/X5R】 1.25mm thickness（G） HTLT Rated voltage x ％ UMK212 BJ104[]G-T B X5R*1 0.1 μ ±10，±20 3.5 200 1.25±0.10 R/W UMK212 BJ224[]G-T B X5R*1 0.22 μ ±10，±20 3.5 200 1.25±0.10 R/W UMK212 BJ474[]G-T B X5R*1 0.47 μ ±10，±20 3.5 150 1.25±0.10 R/W UMK212 BJ105[]G-T B X5R 1 μ ±10，±20 5 150 1.25±0.10 R/W UMK212ABJ225[]G-T B X5R 2.2 μ ±10，±20 10 150 1.25+0.15/-0.05 R UMK212BBJ475[]G-T X5R 4.7 μ ±10，±20 10 150 1.25+0.20/-0 R TMK212 BJ225[]G-T B X5R 2.2 μ ±10，±20 5 150 1.25±0.10 R TMK212ABJ475[]G-T TMK212 BJ475[]G-T X5R 4.7 μ ±10，±20 10 150 1.25+0.15/ -0.05 R TMK212BBJ106MG-T X5R 10 μ ±20 10 150 1.25+0.20/-0 R EMK212 BJ225[]G-T B X5R*1 2.2 μ ±10，±20 5 200 1.25±0.10 R EMK212ABJ475[]G-T EMK212 BJ475[]G-T B X5R*1 4.7 μ ±10，±20 5 150 1.25+0.15/-0.05 R EMK212ABJ106[]G-T EMK212 BJ106[]G-T X5R 10 μ ±10，±20 10 150 1.25+0.15/- 0.05 R EMK212BBJ226MG-T X5R 22 μ ±20 10 150 1.25+0.20/-0 R LMK212 BJ225[]G-T B X5R*1 2.2 μ ±10，±20 5 200 1.25±0.10 R LMK212ABJ475[]G-T LMK212 BJ475[]G-T B X5R*1 4.7 μ ±10，±20 5 200 1.25+0.15/-0.05 R LMK212ABJ106[]G-T LMK212 BJ106[]G-T X5R 10 μ ±10，±20 10 200 1.25+0.15/- 0.05 R LMK212BBJ226MG-T LMK212 BJ226MG-T X5R 22 μ ±20 10 150 1.25+0.20/-0 R JMK212ABJ475[]G-T JMK212 BJ475[]G-T B X5R 4.7 μ ±10，±20 5 200 1.25+0.15/ -0.05 R JMK212ABJ106[]G-T JMK212 BJ106[]G-T X5R*1 10 μ ±10，±20 10 200 1.25+0.15/-0.05 R JMK212ABJ226MG-T JMK212 BJ226MG-T X5R 22 μ ±20 10 150 1.25+0.15/-0.05 R JMK212BBJ476MG-T JMK212 BJ476MG-T X5R 47 μ ±20 10 150 1.25+0.20/-0 R 【Temperature Characteristic BJ : B/X5R】 0.85mm thickness（D） HTLT Rated voltage x ％ UMK212ABJ105[]D-T UMK212 BJ105[]D-TD X5R 1 μ ±10，±20 10 150 0.85±0.10 R UMK212BBJ225[]D-T X5R 2.2 μ ±10，±20 10 150 0.85±0.10 R TMK212 BJ474[]D-T B X5R 0.47 μ ±10，±20 3.5 200 0.85±0.10 R TMK212 BJ105[]D-T B X5R 1 μ ±10，±20 5 200 0.85±0.10 R TMK212ABJ225[]D-T TMK212 BJ225[]D-T B X5R 2.2 μ ±10，±20 5 150 0.85±0.10 R TMK212BBJ475[]D-T TMK212 BJ475[]D-TD X5R 4.7 μ ±10，±20 10 150 0.85±0.10 R EMK212 BJ105[]D-T B X5R*1 1 μ ±10，±20 5 200 0.85±0.10 R EMK212ABJ225[]D-T EMK212 BJ225[]D-T B X5R*1 2.2 μ ±10，±20 5 150 0.85±0.10 R EMK212 BJ475[]D-T B X5R 4.7 μ ±10，±20 10 150 0.85±0.10 R EMK212ABJ106[]D-T EMK212 BJ106[]D-TD X5R 10 μ ±10，±20 10 150 0.85±0.10 R LMK212 BJ105[]D-T B X5R*1 1 μ ±10，±20 3.5 200 0.85±0.10 R LMK212 BJ225[]D-T B X5R*1 2.2 μ ±10，±20 5 200 0.85±0.10 R LMK212 BJ475[]D-T B X5R 4.7 μ ±10，±20 10 200 0.85±0.10 R LMK212ABJ106[]D-T LMK212 BJ106[]D-T X5R 10 μ ±10，±20 10 150 0.85±0.10 R LMK212BBJ226MD-T X5R 22 μ ±20 10 150 0.85±0.10 R JMK212 BJ475[]D-T X5R 4.7 μ ±10，±20 10 200 0.85±0.10 R JMK212ABJ106[]D-T JMK212 BJ106[]D-T X5R 10 μ ±10，±20 10 200 0.85±0.10 R JMK212ABJ226MD-T JMK212 BJ226MD-T X5R 22 μ ±20 10 150 0.85±0.10 R AMK212BBJ476MD-T 4 X5R 47 μ ±20 10 150 0.85±0.10 R 【Temperature Characteristic BJ : X5R】 0.45mm thickness（K） HTLT Rated voltage x ％ LMK212ABJ475[]K-T LMK212 BJ475[]K-T 10 X5R 4.7 μ ±10，±20 10 150 0.45±0.05R JMK212ABJ475[]K-T JMK212 BJ475[]K-T X5R 4.7 μ ±10，±20 10 150 0.45±0.05 R JMK212ABJ106MK-T *2 JMK212 BJ106MK-T X5R 10 μ ±20 10 150 0.45±0.05 R Capacitance tolerance [％] tanδ [％] tanδ [％] Temperature characteristics tanδ [％] Rated voltage [V] 6.3 Part number 1 Part number 2 Rated voltage [V] Part number 1 Part number 2 Part number 1 Part number 2 Temperature characteristics Temperature characteristics Part number 1 Part number 2 Part number 1 Part number 2 6.3 Temperature characteristics Capacitance tolerance [％] Thickness*3 [mm] Capacitance tolerance [％] Thickness*3 [mm] Thickness*3 [mm] Capacitance [F] Capacitance [F] Capacitance tolerance [％] Capacitance [F] Capacitance [F] Capacitance [F] Temperature characteristics tanδ [％] tanδ [％] Soldering R:Reflow W:Wave Capacitance tolerance [％] Thickness*3 [mm] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Thickness*3 [mm] Soldering R:Reflow W:Wave Rated voltage [V] Rated voltage [V] Rated voltage [V] 6.3 6.3 c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER 【Temperature Characteristic C6 : X6S】 1.25mm thickness（G） HTLT Rated voltage x ％ LMK212BC6226MG-T 10 X6S 22 μ ±20 10 150 1.25+0.20/-0 R JMK212BC6226MG-T 6.3 X6S 22 μ ±20 10 150 1.25+0.20/-0 R AMK212AC6226MG-T X6S 22 μ ±20 10 150 1.25+0.15/-0.05 R AMK212BC6476MG-T X6S 47 μ ±20 10 150 1.25+0.20/-0 R 【Temperature Characteristic C6 : X6S】 0.85mm thickness（D） HTLT Rated voltage x ％ LMK212AC6106[]D-T 10 X6S 10 μ ±10，±20 10 150 0.85±0.10 R 【Temperature Characteristic B7 : X7R】 1.25mm thickness（G） HTLT Rated voltage x ％ UMK212 B7104[]G-T X7R 0.1 μ ±10，±20 3.5 200 1.25±0.10 R/W UMK212 B7224[]G-T X7R 0.22 μ ±10，±20 3.5 150 1.25±0.10 R/W UMK212 B7474[]G-T X7R 0.47 μ ±10，±20 3.5 150 1.25±0.10 R/W UMK212 B7105[]G-T X7R 1 μ ±10，±20 10 150 1.25±0.10 R/W UMK212BB7225[]G-T X7R 2.2 μ ±10，±20 10 150 1.25+0.20/-0 R GMK212 B7105[]G-T 35 X7R 1 μ ±10，±20 3.5 150 1.25±0.10 R/W TMK212 B7105[]G-T X7R 1 μ ±10，±20 3.5 150 1.25±0.10 R TMK212 B7225[]G-TR X7R 2.2 μ ±10，±20 10 150 1.25±0.10 R TMK212AB7475[]G-T TMK212 B7475[]G-T X7R 4.7 μ ±10，±20 10 150 1.25+0.15/ -0.05 R EMK212 B7105[]G-T X7R 1 μ ±10，±20 3.5 200 1.25±0.10 R/W EMK212 B7225[]G-T X7R 2.2 μ ±10，±20 10 150 1.25±0.10 R EMK212 B7475[]G-T X7R 4.7 μ ±10，±20 10 150 1.25±0.10 R EMK212BB7106MG-T X7R 10 μ ±20 10 150 1.25+0.20/-0 R LMK212 B7105[]G-T X7R 1 μ ±10，±20 3.5 200 1.25±0.10 R/W LMK212 B7225[]G-T X7R 2.2 μ ±10，±20 5 200 1.25±0.10 R LMK212 B7475[]G-T X7R 4.7 μ ±10，±20 10 150 1.25±0.10 R LMK212AB7106MG-T LMK212 B7106MG-TD X7R 10 μ ±20 10 150 1.25+0.15/-0.05 R JMK212AB7106[]G-T JMK212 B7106[]G-T 6.3 X7R 10 μ ±10，±20 10 150 1.25+0.1 5/-0.05 R 【Temperature Characteristic B7 : X7R】 0.85mm thickness（D） HTLT Rated voltage x ％ UMK212AB7104[]D-T X7R 0.1 μ ±10，±20 10 150 0.85±0.10 R UMK212AB7224[]D-T X7R 0.22 μ ±10，±20 10 150 0.85±0.10 R UMK212AB7474[]D-T X7R 0.47 μ ±10，±20 10 150 0.85±0.10 R UMK212AB7105[]D-T X7R 1 μ ±10，±20 10 150 0.85±0.10 R TMK212AB7225[]D-TR 25 X7R 2.2 μ ±10，±20 10 150 0.85±0.10 R EMK212 B7474[]D-T X7R 0.47 μ ±10，±20 3.5 200 0.85±0.10 R/W EMK212 B7105[]D-T X7R 1 μ ±10，±20 5 200 0.85±0.10 R EMK212AB7225[]D-T EMK212 B7225[]D-T X7R 2.2 μ ±10，±20 5 150 0.85±0.10 R LMK212 B7105[]D-T X7R 1 μ ±10，±20 3.5 200 0.85±0.10 R LMK212AB7225[]D-T LMK212 B7225[]D-T X7R 2.2 μ ±10，±20 5 200 0.85±0.10 R LMK212AB7475[]D-TR LMK212 B7475[]D-TR X7R 4.7 μ ±10，±20 10 150 0.85±0.10R 【Temperature Characteristic F :F/Y5V】 1.25mm thickness（G） HTLT Rated voltage x ％ UMK212 F474ZG-T F Y5V 0.47 μ ＋80/-20 7 200 1.25±0.10 R/W UMK212 F105ZG-T F Y5V 1 μ ＋80/-20 7 200 1.25±0.10 R/W EMK212 F225ZG-T 16 F Y5V 2.2 μ ＋80/-20 7 200 1.25±0.10 R/W LMK212 F475ZG-T F Y5V 4.7 μ ＋80/-20 9 200 1.25±0.10 R LMK212 F106ZG-T F Y5V 10 μ ＋80/-20 16 200 1.25±0.10 R JMK212 F106ZG-T 6.3 F Y5V 10 μ ＋80/-20 16 200 1.25±0.10 R 【Temperature Characteristic F : F/Y5V】 0.85mm thickness（D） HTLT Rated voltage x ％ UMK212 F224ZD-T 50 F Y5V 0.22 μ ＋80/-20 7 200 0.85±0.10 R/W LMK212 F225ZD-T 10 F Y5V 2.2 μ ＋80/-20 9 200 0.85±0.10 R JMK212 F475ZD-T 6.3 F Y5V 4.7 μ ＋80/-20 16 200 0.85±0.10 R

• 316TYPE 【Temperature Characteristic BJ : B/Y5R】 1.6mm thickness（D） HTLT Rated voltage x ％ UMK316 BJ105[]L-T B X5R*1 1 μ ±10，±20 3.5 200 1.6±0.20 R UMK316 BJ225[]L-T X5R 2.2 μ ±10，±20 10 150 1.6±0.20 R UMK316 BJ475[]L-T X5R 4.7 μ ±10，±20 10 150 1.6±0.20 R UMK316BBJ106ML-T X5R 10 μ ±20 10 150 1.6±0.30 R TMK316 BJ225[]L-T B X5R*1 2.2 μ ±10，±20 3.5 200 1.6±0.20 R TMK316 BJ475[]L-T B X5R 4.7 μ ±10，±20 5 150 1.6±0.20 R TMK316 BJ106[]L-T X5R*1 10 μ ±10，±20 5 150 1.6±0.20 R TMK316BBJ226ML-T X5R 22 μ ±20 10 150 1.6±0.30 R EMK316 BJ225[]L-T B X5R*1 2.2 μ ±10，±20 3.5 200 1.6±0.20 R/W EMK316 BJ475[]L-T B X5R 4.7 μ ±10，±20 5 200 1.6±0.20 R EMK316 BJ106[]L-T B X5R*1 10 μ ±10，±20 5 150 1.6±0.20 R EMK316ABJ226ML-T EMK316 BJ226ML-T B X5R 22 μ ±20 10 150 1.6±0.20 R LMK316 BJ106[]L-T B X5R*1 10 μ ±10，±20 5 200 1.6±0.20 R LMK316ABJ226[]Ｌ-T LMK316 BJ226[]L-T B X5R 22 μ ±10，±20 10 150 1.6±0.20 R LMK316ABJ476ML-T LMK316 BJ476ML-T X5R 47 μ ±20 10 150 1.6±0.20 R Capacitance [F] tanδ [％] Capacitance tolerance [％] Capacitance tolerance [％] Rated voltage [V] tanδ [％] Capacitance tolerance [％] Temperature characteristics Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] Rated voltage [V] Thickness*3 [mm] tanδ [％] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave tanδ [％] Thickness*3 [mm] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Temperature characteristics Thickness*3 [mm] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Capacitance [F] tanδ [％] Capacitance tolerance [％] Capacitance [F] Capacitance [F] Capacitance tolerance [％] Temperature characteristics Temperature characteristics Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Part number 1 Part number 2 Part number 1 Part number 2 Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Part number 1 Part number 2 Rated voltage [V]Part number 1 Part number 2 Rated voltage [V] Thickness*3 [mm] Capacitance tolerance [％] Capacitance [F] Capacitance tolerance [％] Capacitance [F] Capacitance [F] Part number 1 Part number 2 Temperature characteristics tanδ [％] tanδ [％] Soldering R:Reflow W:Wave Rated voltage [V] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ JMK316 BJ106[]L-T B X5R*1 10 μ ±10，±20 5 200 1.6±0.20 R JMK316ABJ226[]L-T JMK316 BJ226[]L-T B X5R 22 μ ±10，±20 10 200 1.6±0.20 R JMK316ABJ476ML-T JMK316 BJ476ML-T X5R 47 μ ±20 10 200 1.6±0.20 R JMK316ABJ107ML-T JMK316 BJ107ML-T X5R 100 μ ±20 10 150 1.6±0.20 R AMK316ABJ107ML-T AMK316 BJ107ML-T X5R 100 μ ±20 10 150 1.6±0.20 R AMK316BBJ157ML-T X5R 150 μ ±20 10 150 1.6±0.30 R 【Temperature Characteristic BJ : B/Y5R】 0.85mm thickness（D） HTLT Rated voltage x ％ UMK316 BJ105[]D-T B X5R 1 μ ±10，±20 3.5 150 0.85±0.10 R UMK316 BJ225[]D-T B X5R 2.2 μ ±10，±20 3.5 150 0.85±0.10 R UMK316ABJ475[]D-T UMK316 BJ475[]D-T X5R 4.7 μ ±10，±20 10 150 0.85±0.10 R TMK316 BJ105[]D-T B X5R 1 μ ±10，±20 3.5 200 0.85±0.10 R TMK316 BJ225[]D-T B X5R 2.2 μ ±10，±20 3.5 150 0.85±0.10 R TMK316 BJ475[]D-T X5R 4.7 μ ±10，±20 5 150 0.85±0.10 R TMK316ABJ106[]D-T TMK316 BJ106[]D-TD X5R 10 μ ±10，±20 10 150 0.85±0.10 R EMK316 BJ225[]D-T B X5R 2.2 μ ±10，±20 3.5 200 0.85±0.10 R EMK316 BJ475[]D-T B X5R 4.7 μ ±10，±20 5 200 0.85±0.10 R EMK316 BJ106[]D-T X5R 10 μ ±10，±20 10 150 0.85±0.10 R EMK316ABJ226MD-T EMK316 BJ226MD-T X5R 22 μ ±20 10 150 0.85±0.10 R LMK316 BJ475[]D-T B X5R 4.7 μ ±10，±20 5 200 0.85±0.10 R LMK316 BJ106[]D-T B X5R 10 μ ±10，±20 10 200 0.85±0.10 R LMK316ABJ226MD-T LMK316 BJ226MD-T X5R 22 μ ±20 10 150 0.85±0.10 R JMK316 BJ106[]D-T B X5R 10 μ ±10，±20 10 200 0.85±0.10 R JMK316ABJ226MD-T JMK316 BJ226MD-T X5R 22 μ ±20 10 150 0.85±0.10 R JMK316ABJ476MD-T JMK316 BJ476MD-T X5R 47 μ ±20 10 150 0.85±0.10 R 【Temperature Characteristic C7 : X7S】 1.6mm thickness（L） HTLT Rated voltage x ％ AMK316AC7476ML-T 4 X7S 47 μ ±20 10 150 1.6±0.20 R 【Temperature Characteristic C6 : X6S】 1.6mm thickness（L） HTLT Rated voltage x ％ EMK316BC6226ML-T 16 X6S 22 μ ±20 10 150 1.6±0.30 R JMK316AC6476ML-T 6.3 X6S 47 μ ±20 10 150 1.6±0.20 R AMK316AC6476ML-T X6S 47 μ ±20 10 200 1.6±0.20 R AMK316AC6107ML-T X6S 100 μ ±20 10 150 1.6±0.20 R 【Temperature Characteristic B7 : X7R】 1.6mm thickness（L） HTLT Rated voltage x ％ UMK316 B7224[]L-T X7R 0.22 μ ±10，±20 2.5 200 1.6±0.20 R/W UMK316 B7474[]L-T X7R 0.47 μ ±10，±20 3.5 200 1.6±0.20 R/W UMK316 B7105[]L-T X7R 1 μ ±10，±20 3.5 200 1.6±0.20 R UMK316 B7225[]L-T X7R 2.2 μ ±10，±20 10 150 1.6±0.20 R UMK316AB7475[]L-T UMK316 B7475[]L-T X7R 4.7 μ ±10，±20 10 150 1.6±0.20 R TMK316 B7105[]L-T X7R 1 μ ±10，±20 3.5 200 1.6±0.20 R/W TMK316 B7225[]L-T X7R 2.2 μ ±10，±20 3.5 200 1.6±0.20 R TMK316AB7475[]L-T TMK316 B7475[]L-T X7R 4.7 μ ±10，±20 10 200 1.6±0.20 R TMK316AB7106[]L-T TMK316 B7106[]L-TD X7R 10 μ ±10，±20 10 150 1.6±0.20 R EMK316 B7225[]L-T X7R 2.2 μ ±10，±20 3.5 200 1.6±0.20 R/W EMK316AB7106[]L-T EMK316 B7106[]L-TD X7R 10 μ ±10，±20 10 200 1.6±0.20 R LMK316 B7225[]L-T X7R 2.2 μ ±10，±20 3.5 200 1.6±0.20 R/W LMK316 B7475[]L-T X7R 4.7 μ ±10，±20 5 200 1.6±0.20 R LMK316AB7106[]L-T LMK316 B7106[]L-TD X7R 10 μ ±10，±20 10 200 1.6±0.20 R LMK316AB7226[]L-TR LMK316 B7226[]Ｌ-TD X7R 22 μ ±10，±20 10 150 1.6±0.20 R JMK316 B7106[]L-T 6.3 X7R 10 μ ±10，±20 5 200 1.6±0.20 R 【Temperature Characteristic B7 : X7R】 0.85mm thickness（D） HTLT Rated voltage x ％ UMK316 B7225[]D-T 50 X7R 2.2 μ ±10，±20 10 150 0.85±0.10 R TMK316AB7475[]D-T 25 X7R 4.7 μ ±10，±20 10 150 0.85±0.10 R LMK316AB7106MD-T 10 X7R 10 μ ±20 10 150 0.85±0.10 R 【Temperature Characteristic F : F/Y5V】 1.6mm thickness（L） HTLT Rated voltage x ％ GMK316 F106ZL-T 35 F Y5V 10 μ ＋80/-20 9 200 1.6±0.20 R TMK316 F106ZL-T 25 F Y5V 10 μ ＋80/-20 9 200 1.6±0.20 R EMK316 F106ZL-T 16 F Y5V 10 μ ＋80/-20 9 200 1.6±0.20 R LMK316 F226ZL-T 10 F Y5V 22 μ ＋80/-20 16 200 1.6±0.20 R 【Temperature Characteristic F : F/Y5V】 1.25mm thickness（G） HTLT Rated voltage x ％ UMK316 F225ZG-T 50 F Y5V 2.2 μ ＋80/-20 7 200 1.25±0.10 R/W GMK316 F475ZG-T 35 F Y5V 4.7 μ ＋80/-20 7 200 1.25±0.10 R Soldering R:Reflow W:Wave Capacitance [F] Capacitance tolerance [％] tanδ [％] Thickness*3 [mm]Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Capacitance [F] Capacitance tolerance [％] tanδ [％] Temperature characteristics tanδ [％] Capacitance [F] Part number 1 Part number 2 Temperature characteristics Part number 1 Thickness*3 [mm] Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Temperature characteristics Capacitance [F]Part number 2 Thickness*3 [mm] Capacitance [F] Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Part number 2 Rated voltage [V] Temperature characteristics Thickness*3 [mm] Thickness*3 [mm] Temperature characteristics Capacitance [F] Capacitance [F] Capacitance tolerance [％] Soldering R:Reflow W:Wave Thickness*3 [mm] tanδ [％] Soldering R:Reflow W:Wave Capacitance tolerance [％] Part number 1 tanδ [％] Capacitance tolerance [％] Capacitance [F] tanδ [％] tanδ [％] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Rated voltage [V] 6.3 Part number 2 Rated voltage [V] Part number 1 Part number 2 Rated voltage [V] Part number 1 Capacitance tolerance [％] Capacitance tolerance [％] Capacitance tolerance [％] Soldering R:Reflow W:Wave tanδ [％] Soldering R:Reflow W:Wave Thickness*3 [mm] Soldering R:Reflow W:Wave Thickness*3 [mm] Rated voltage [V] 6.3 c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER 【Temperature Characteristic F : F/Y5V】 0.85mm thickness（D） HTLT Rated voltage x ％ LMK316 F475ZD-T 10 F Y5V 4.7 μ ＋80/-20 9 200 0.85±0.10 R JMK316 F106ZD-T 6.3 F Y5V 10 μ ＋80/-20 16 200 0.85±0.10 R

• 325TYPE 【Temperature Characteristic BJ : B/X5R】 2.5mm thickness（M） HTLT Rated voltage x ％ UMK325 BJ475[]M-T X5R 4.7 μ ±10，±20 5 150 2.5±0.20 R UMK325 BJ106[]M-T X5R 10 μ ±10，±20 5 150 2.5±0.20 R GMK325 BJ226MM-T 35 X5R 22 μ ±20 10 150 2.5±0.20 R TMK325 BJ106[]M-T B X5R*1 10 μ ±10，±20 3.5 150 2.5±0.20 R TMK325 BJ226[]M-T X5R 22 μ ±10，±20 5 150 2.5±0.20 R TMK325ABJ476MM-T X5R 47 μ ±20 10 150 2.5±0.30 R EMK325 BJ226[]M-T B X5R 22 μ ±10，±20 5 150 2.5±0.20 R EMK325 BJ476MM-T X5R 47 μ ±20 10 150 2.5±0.20 R LMK325 BJ226[]M-T B X5R 22 μ ±10，±20 5 200 2.5±0.20 R LMK325 BJ476MM-T X5R 47 μ ±20 10 150 2.5±0.20 R LMK325ABJ107MM-T LMK325 BJ107MM-T X5R 100 μ ±20 10 150 2.5±0.30 R JMK325 BJ476MM-T X5R 47 μ ±20 10 150 2.5±0.20 R JMK325ABJ107MM-T JMK325 BJ107MM-T X5R 100 μ ±20 10 150 2.5±0.30 R JMK325ABJ227MM-T X5R 220 μ ±20 10 150 2.5±0.30 R AMK325ABJ227MM-T 4 X5R 220 μ ±20 10 150 2.5±0.30 R 【Temperature Characteristic BJ : B/X5R】 1.9mm thickness（Y,N） HTLT Rated voltage x ％ UMK325 BJ475[]N-T 50 X5R 4.7 μ ±10，±20 10 150 1.9±0.20 R GMK325 BJ225MN-T B X5R 2.2 μ ±20 3.5 200 1.9±0.20 R GMK325 BJ475[]N-T X5R 4.7 μ ±10，±20 10 150 1.9±0.20 R GMK325 BJ106[]N-T B X5R 10 μ ±10，±20 5 150 1.9±0.20 R TMK325 BJ335MN-T B X5R*1 3.3 μ ±20 3.5 200 1.9±0.20 R TMK325 BJ475[]N-T B X5R*1 4.7 μ ±10，±20 3.5 200 1.9±0.20 R TMK325 BJ106[]N-T B X5R 10 μ ±10，±20 5 200 1.9±0.20 R EMK325 BJ475[]N-T B X5R*1 4.7 μ ±10，±20 3.5 200 1.9±0.20 R EMK325 BJ106[]N-T B X5R 10 μ ±10，±20 3.5 200 1.9±0.20 R EMK325 BJ476MY-T X5R 47 μ ±20 10 150 1.9+0.1/-0.2 R LMK325 BJ226MY-T B X5R 22 μ ±20 5 150 1.9+0.1/-0.2 R LMK325 BJ106[]N-T B X5R 10 μ ±10，±20 3.5 200 1.9±0.20 R JMK325 BJ226MY-T B X5R 22 μ ±20 5 200 1.9+0.1/-0.2 R JMK325 BJ107MY-T X5R 100 μ ±20 10 150 1.9+0.1/-0.2 R JMK325 BJ476MN-T X5R 47 μ ±20 10 150 1.9±0.20 R 【Temperature Characteristic BJ : B/X5R】 0.85mm thickness（D） HTLT Rated voltage x ％ TMK325 BJ106[]D-T 25 B X5R 10 μ ±10，±20 5 150 0.85±0.10 R EMK325 BJ106[]D-T B X5R 10 μ ±10，±20 5 150 0.85±0.10 R EMK325 BJ226MD-T B X5R 22 μ ±20 10 150 0.85±0.10 R LMK325 BJ335[]D-T B X5R 3.3 μ ±10，±20 3.5 200 0.85±0.10 R LMK325 BJ475[]D-T B X5R 4.7 μ ±10，±20 5 200 0.85±0.10 R LMK325 BJ106[]D-T B X5R 10 μ ±10，±20 5 150 0.85±0.10 R 【Temperature Characteristic C7 : X7S】 2.5mm thickness（M） HTLT Rated voltage x ％ JMK325AC7107MM-T 6.3 X7S 100 μ ±20 10 150 2.5±0.30 R 【Temperature Characteristic C6 : X6S】 2.5mm thickness（M） HTLT Rated voltage x ％ EMK325AC6476MM-T 16 X6S 47 μ ±20 10 150 2.5±0.30 R JMK325AC6107MM-T 6.3 X6S 100 μ ±20 10 150 2.5±0.30 R 【Temperature Characteristic B7 : X7R】 2.5mm thickness（M） HTLT Rated voltage x ％ UMK325 B7475[]M-T X7R 4.7 μ ±10，±20 5 150 2.5±0.20 R UMK325AB7106[]M-T X7R 10 μ ±10，±20 10 150 2.5±0.30 R TMK325AB7106[]M-T X7R 10 μ ±10，±20 10 150 2.5±0.30 R TMK325 B7226[]M-TR X7R 22 μ ±10，±20 10 150 2.5±0.20 R EMK325 B7226[]M-TR 16 X7R 22 μ ±10，±20 10 150 2.5±0.20 R LMK325 B7476[]M-TR 10 X7R 47 μ ±10，±20 10 150 2.5±0.20 R JMK325 B7476[]M-TR 6.3 X7R 47 μ ±10，±20 10 200 2.5±0.20 R Rated voltage [V] Rated voltage [V] Thickness*3 [mm] Part number 1 Part number 2 Capacitance tolerance [％] tanδ [％] tanδ [％] Capacitance tolerance [％] Rated voltage [V] Temperature characteristics Capacitance [F] Capacitance tolerance [％] Capacitance tolerance [％] tanδ [％] Capacitance [F] tanδ [％] Soldering R:Reflow W:Wave Part number 1 Part number 2 Temperature characteristics Capacitance [F] Capacitance tolerance [％] Part number 1 Part number 2 Part number 1 Part number 2 Temperature characteristicsRated voltage [V] Temperature characteristics Part number 1 Part number 2 Temperature characteristics Capacitance [F] Temperature characteristics Capacitance [F] Temperature characteristics Soldering R:Reflow W:Wave Thickness*3 [mm] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Thickness*3 [mm] Soldering R:Reflow W:Wave Thickness*3 [mm] Capacitance [F] Soldering R:Reflow W:Wave Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] Capacitance [F] Capacitance tolerance [％] Capacitance tolerance [％] tanδ [％] tanδ [％] tanδ [％] Soldering R:Reflow W:Wave Rated voltage [V] Rated voltage [V] Part number 1 Part number 2 Rated voltage [V] 6.3 6.3 Part number 2 Part number 1 c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER 【Temperature Characteristic B7 : X7R】 1.9mm thickness（N） HTLT Rated voltage x ％ UMK325 B7475[]N-TR 50 X7R 4.7 μ ±10，±20 10 150 1.9±0.20 R TMK325 B7335[]N-T X7R 3.3 μ ±10，±20 3.5 200 1.9±0.20 R TMK325 B7475[]N-T X7R 4.7 μ ±10，±20 3.5 150 1.9±0.20 R TMK325 B7106[]N-TR X7R 10 μ ±10，±20 10 150 1.9±0.20 R EMK325 B7475[]N-T X7R 4.7 μ ±10，±20 3.5 200 1.9±0.20 R EMK325 B7106[]N-T X7R 10 μ ±10，±20 3.5 150 1.9±0.20 R LMK325 B7106[]N-T 10 X7R 10 μ ±10，±20 3.5 200 1.9±0.20 R 【Temperature Characteristic F : F/Y5V】 1.9mm thickness（N） HTLT Rated voltage x ％ EMK325 F226ZN-T 16 F Y5V 22 μ ＋80/-20 16 200 1.9±0.20 R LMK325 F226ZN-T 10 F Y5V 22 μ ＋80/-20 16 200 1.9±0.20 R JMK325 F476ZN-T 6.3 F Y5V 47 μ ＋80/-20 16 200 1.9±0.20 R Multilayer Ceramic Capacitors（Temperature compensating type）

• 042TYPE 【Temperature Characteristic CG : CG/C0G】 0.2mm thickness（C,D） HTLT Rated voltage x ％ EMK042 CG010[]D-W CG C0G 1 p ±0.1pF, ±0.25pF 420 200 0.2±0.02 R EMK042 CG020[]D-W CG C0G 2 p ±0.1pF, ±0.25pF 440 200 0.2±0.02 R EMK042 CG030[]D-W CG C0G 3 p ±0.1pF, ±0.25pF 460 200 0.2±0.02 R EMK042 CG040[]D-W CG C0G 4 p ±0.1pF, ±0.25pF 480 200 0.2±0.02 R EMK042 CG050[]D-W CG C0G 5 p ±0.1pF, ±0.25pF 500 200 0.2±0.02 R EMK042 CG5R1DD-W CG C0G 5.1 p ±0.5pF 502 200 0.2±0.02 R EMK042 CG5R2DD-W CG C0G 5.2 p ±0.5pF 504 200 0.2±0.02 R EMK042 CG5R3DD-W CG C0G 5.3 p ±0.5pF 506 200 0.2±0.02 R EMK042 CG5R4DD-W CG C0G 5.4 p ±0.5pF 508 200 0.2±0.02 R EMK042 CG5R5DD-W CG C0G 5.5 p ±0.5pF 510 200 0.2±0.02 R EMK042 CG5R6DD-W CG C0G 5.6 p ±0.5pF 512 200 0.2±0.02 R EMK042 CG5R7DD-W CG C0G 5.7 p ±0.5pF 514 200 0.2±0.02 R EMK042 CG5R8DD-W CG C0G 5.8 p ±0.5pF 516 200 0.2±0.02 R EMK042 CG5R9DD-W CG C0G 5.9 p ±0.5pF 518 200 0.2±0.02 R EMK042 CG060DD-W CG C0G 6 p ±0.5pF 520 200 0.2±0.02 R EMK042 CG6R1DD-W CG C0G 6.1 p ±0.5pF 522 200 0.2±0.02 R EMK042 CG6R2DD-W CG C0G 6.2 p ±0.5pF 524 200 0.2±0.02 R EMK042 CG6R3DD-W CG C0G 6.3 p ±0.5pF 526 200 0.2±0.02 R EMK042 CG6R4DD-W CG C0G 6.4 p ±0.5pF 528 200 0.2±0.02 R EMK042 CG6R5DD-W CG C0G 6.5 p ±0.5pF 530 200 0.2±0.02 R EMK042 CG6R6DD-W CG C0G 6.6 p ±0.5pF 532 200 0.2±0.02 R EMK042 CG6R7DD-W CG C0G 6.7 p ±0.5pF 534 200 0.2±0.02 R Rated voltage [V] Thickness*3 [mm] Thickness*3 [mm] Part number 2 Part number 1 Part number 2 Capacitance [F] Capacitance tolerance [％] Temperature characteristics Part number 1 Soldering R:Reflow W:Wave tanδ [％] Soldering R:Reflow W:Wave Thickness*3 [mm] tanδ [％] Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Capacitance tolerance [％] Capacitance tolerance [％] Temperature characteristics Capacitance [F] Capacitance [F] Q (at 1MHz) min Soldering R:Reflow W:Wave Rated voltage [V] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ EMK042 CG6R8DD-W CG C0G 6.8 p ±0.5pF 536 200 0.2±0.02 R EMK042 CG6R9DD-W CG C0G 6.9 p ±0.5pF 538 200 0.2±0.02 R EMK042 CG070DD-W CG C0G 7 p ±0.5pF 540 200 0.2±0.02 R EMK042 CG7R1DD-W CG C0G 7.1 p ±0.5pF 542 200 0.2±0.02 R EMK042 CG7R2DD-W CG C0G 7.2 p ±0.5pF 544 200 0.2±0.02 R EMK042 CG7R3DD-W CG C0G 7.3 p ±0.5pF 546 200 0.2±0.02 R EMK042 CG7R4DD-W CG C0G 7.4 p ±0.5pF 548 200 0.2±0.02 R EMK042 CG7R5DD-W CG C0G 7.5 p ±0.5pF 550 200 0.2±0.02 R EMK042 CG7R6DD-W CG C0G 7.6 p ±0.5pF 552 200 0.2±0.02 R EMK042 CG7R7DD-W CG C0G 7.7 p ±0.5pF 554 200 0.2±0.02 R EMK042 CG7R8DD-W CG C0G 7.8 p ±0.5pF 556 200 0.2±0.02 R EMK042 CG7R9DD-W CG C0G 7.9 p ±0.5pF 558 200 0.2±0.02 R EMK042 CG080DD-W CG C0G 8 p ±0.5pF 560 200 0.2±0.02 R EMK042 CG8R1DD-W CG C0G 8.1 p ±0.5pF 562 200 0.2±0.02 R EMK042 CG8R2DD-W CG C0G 8.2 p ±0.5pF 564 200 0.2±0.02 R EMK042 CG8R3DD-W CG C0G 8.3 p ±0.5pF 566 200 0.2±0.02 R EMK042 CG8R4DD-W CG C0G 8.4 p ±0.5pF 568 200 0.2±0.02 R EMK042 CG8R5DD-W CG C0G 8.5 p ±0.5pF 570 200 0.2±0.02 R EMK042 CG8R6DD-W CG C0G 8.6 p ±0.5pF 572 200 0.2±0.02 R EMK042 CG8R7DD-W CG C0G 8.7 p ±0.5pF 574 200 0.2±0.02 R EMK042 CG8R8DD-W CG C0G 8.8 p ±0.5pF 576 200 0.2±0.02 R EMK042 CG8R9DD-W CG C0G 8.9 p ±0.5pF 578 200 0.2±0.02 R EMK042 CG090DD-W CG C0G 9 p ±0.5pF 580 200 0.2±0.02 R EMK042 CG9R1DD-W CG C0G 9.1 p ±0.5pF 582 200 0.2±0.02 R EMK042 CG9R2DD-W CG C0G 9.2 p ±0.5pF 584 200 0.2±0.02 R EMK042 CG9R3DD-W CG C0G 9.3 p ±0.5pF 586 200 0.2±0.02 R EMK042 CG9R4DD-W CG C0G 9.4 p ±0.5pF 588 200 0.2±0.02 R EMK042 CG9R5DD-W CG C0G 9.5 p ±0.5pF 590 200 0.2±0.02 R EMK042 CG9R6DD-W CG C0G 9.6 p ±0.5pF 592 200 0.2±0.02 R EMK042 CG9R7DD-W CG C0G 9.7 p ±0.5pF 594 200 0.2±0.02 R EMK042 CG9R8DD-W CG C0G 9.8 p ±0.5pF 596 200 0.2±0.02 R EMK042 CG9R9DD-W CG C0G 9.9 p ±0.5pF 598 200 0.2±0.02 R EMK042 CG100DD-W CG C0G 10 p ±0.5pF 600 200 0.2±0.02 R EMK042 CG110JD-W CG C0G 11 p ±5％ 620 200 0.2±0.02 R EMK042 CG120JD-W CG C0G 12 p ±5％ 640 200 0.2±0.02 R EMK042 CG130JD-W CG C0G 13 p ±5％ 660 200 0.2±0.02 R EMK042 CG150JD-W CG C0G 15 p ±5％ 700 200 0.2±0.02 R EMK042 CG160JC-W CG C0G 16 p ±5％ 720 200 0.2±0.02 R EMK042 CG180JC-W CG C0G 18 p ±5％ 760 200 0.2±0.02 R EMK042 CG200JC-W CG C0G 20 p ±5％ 800 200 0.2±0.02 R EMK042 CG220JC-W CG C0G 22 p ±5％ 840 200 0.2±0.02 R EMK042 CG240JC-W CG C0G 24 p ±5％ 880 200 0.2±0.02 R EMK042 CG270JC-W CG C0G 27 p ±5％ 940 200 0.2±0.02 R EMK042 CG300JC-W CG C0G 30 p ±5％ 1000 200 0.2±0.02 R EMK042 CG330JC-W CG C0G 33 p ±5％ 1000 200 0.2±0.02 R EMK042 CG360JC-W CG C0G 36 p ±5％ 1000 200 0.2±0.02 R EMK042 CG390JC-W CG C0G 39 p ±5％ 1000 200 0.2±0.02 R EMK042 CG430JC-W CG C0G 43 p ±5％ 1000 200 0.2±0.02 R EMK042 CG470JC-W CG C0G 47 p ±5％ 1000 200 0.2±0.02 R EMK042 CG510JC-W CG C0G 51 p ±5％ 1000 200 0.2±0.02 R EMK042 CG560JC-W CG C0G 56 p ±5％ 1000 200 0.2±0.02 R EMK042 CG620JC-W CG C0G 62 p ±5％ 1000 200 0.2±0.02 R EMK042 CG680JC-W CG C0G 68 p ±5％ 1000 200 0.2±0.02 R EMK042 CG750JC-W CG C0G 75 p ±5％ 1000 200 0.2±0.02 R EMK042 CG820JC-W CG C0G 82 p ±5％ 1000 200 0.2±0.02 R EMK042 CG910JC-W CG C0G 91 p ±5％ 1000 200 0.2±0.02 R EMK042 CG101JC-W CG C0G 100 p ±5％ 1000 200 0.2±0.02 R 【Temperature Characteristic C△ : C△/C0△】 0.2mm thickness（C,D） HTLT Rated voltage x ％ EMK042 CK010[]D-W CK C0K 1 p ±0.1pF, ±0.25pF 420 200 0.2±0.02 R EMK042 CK020[]D-W CK C0K 2 p ±0.1pF, ±0.25pF 440 200 0.2±0.02 R Capacitance [F] Capacitance tolerance [％] Q (at 1MHz) min Thickness*3 [mm] Soldering R:Reflow W:Wave Part number 2 Rated voltage [V] Temperature characteristics Thickness*3 [mm] Capacitance [F]Rated voltage [V]Part number 2 Part number 1 Part number 1 Soldering R:Reflow W:Wave Q (at 1MHz) min Capacitance tolerance [％] Temperature characteristics c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ EMK042 CJ030[]D-W CJ C0J 3 p ±0.1pF, ±0.25pF 460 200 0.2±0.02 R EMK042 CH040[]D-W CH C0H 4 p ±0.1pF, ±0.25pF 480 200 0.2±0.02 R EMK042 CH050[]D-W CH C0H 5 p ±0.1pF, ±0.25pF 500 200 0.2±0.02 R EMK042 CH5R1DD-W CH C0H 5.1 p ±0.5pF 502 200 0.2±0.02 R EMK042 CH5R2DD-W CH C0H 5.2 p ±0.5pF 504 200 0.2±0.02 R EMK042 CH5R3DD-W CH C0H 5.3 p ±0.5pF 506 200 0.2±0.02 R EMK042 CH5R4DD-W CH C0H 5.4 p ±0.5pF 508 200 0.2±0.02 R EMK042 CH5R5DD-W CH C0H 5.5 p ±0.5pF 510 200 0.2±0.02 R EMK042 CH5R6DD-W CH C0H 5.6 p ±0.5pF 512 200 0.2±0.02 R EMK042 CH5R7DD-W CH C0H 5.7 p ±0.5pF 514 200 0.2±0.02 R EMK042 CH5R8DD-W CH C0H 5.8 p ±0.5pF 516 200 0.2±0.02 R EMK042 CH5R9DD-W CH C0H 5.9 p ±0.5pF 518 200 0.2±0.02 R EMK042 CH060DD-W CH C0H 6 p ±0.5pF 520 200 0.2±0.02 R EMK042 CH6R1DD-W CH C0H 6.1 p ±0.5pF 522 200 0.2±0.02 R EMK042 CH6R2DD-W CH C0H 6.2 p ±0.5pF 524 200 0.2±0.02 R EMK042 CH6R3DD-W CH C0H 6.3 p ±0.5pF 526 200 0.2±0.02 R EMK042 CH6R4DD-W CH C0H 6.4 p ±0.5pF 528 200 0.2±0.02 R EMK042 CH6R5DD-W CH C0H 6.5 p ±0.5pF 530 200 0.2±0.02 R EMK042 CH6R6DD-W CH C0H 6.6 p ±0.5pF 532 200 0.2±0.02 R EMK042 CH6R7DD-W CH C0H 6.7 p ±0.5pF 534 200 0.2±0.02 R EMK042 CH6R8DD-W CH C0H 6.8 p ±0.5pF 536 200 0.2±0.02 R EMK042 CH6R9DD-W CH C0H 6.9 p ±0.5pF 538 200 0.2±0.02 R EMK042 CH070DD-W CH C0H 7 p ±0.5pF 540 200 0.2±0.02 R EMK042 CH7R1DD-W CH C0H 7.1 p ±0.5pF 542 200 0.2±0.02 R EMK042 CH7R2DD-W CH C0H 7.2 p ±0.5pF 544 200 0.2±0.02 R EMK042 CH7R3DD-W CH C0H 7.3 p ±0.5pF 546 200 0.2±0.02 R EMK042 CH7R4DD-W CH C0H 7.4 p ±0.5pF 548 200 0.2±0.02 R EMK042 CH7R5DD-W CH C0H 7.5 p ±0.5pF 550 200 0.2±0.02 R EMK042 CH7R6DD-W CH C0H 7.6 p ±0.5pF 552 200 0.2±0.02 R EMK042 CH7R7DD-W CH C0H 7.7 p ±0.5pF 554 200 0.2±0.02 R EMK042 CH7R8DD-W CH C0H 7.8 p ±0.5pF 556 200 0.2±0.02 R EMK042 CH7R9DD-W CH C0H 7.9 p ±0.5pF 558 200 0.2±0.02 R EMK042 CH080DD-W CH C0H 8 p ±0.5pF 560 200 0.2±0.02 R EMK042 CH8R1DD-W CH C0H 8.1 p ±0.5pF 562 200 0.2±0.02 R EMK042 CH8R2DD-W CH C0H 8.2 p ±0.5pF 564 200 0.2±0.02 R EMK042 CH8R3DD-W CH C0H 8.3 p ±0.5pF 566 200 0.2±0.02 R EMK042 CH8R4DD-W CH C0H 8.4 p ±0.5pF 568 200 0.2±0.02 R EMK042 CH8R5DD-W CH C0H 8.5 p ±0.5pF 570 200 0.2±0.02 R EMK042 CH8R6DD-W CH C0H 8.6 p ±0.5pF 572 200 0.2±0.02 R EMK042 CH8R7DD-W CH C0H 8.7 p ±0.5pF 574 200 0.2±0.02 R EMK042 CH8R8DD-W CH C0H 8.8 p ±0.5pF 576 200 0.2±0.02 R EMK042 CH8R9DD-W CH C0H 8.9 p ±0.5pF 578 200 0.2±0.02 R EMK042 CH090DD-W CH C0H 9 p ±0.5pF 580 200 0.2±0.02 R EMK042 CH9R1DD-W CH C0H 9.1 p ±0.5pF 582 200 0.2±0.02 R EMK042 CH9R2DD-W CH C0H 9.2 p ±0.5pF 584 200 0.2±0.02 R EMK042 CH9R3DD-W CH C0H 9.3 p ±0.5pF 586 200 0.2±0.02 R EMK042 CH9R4DD-W CH C0H 9.4 p ±0.5pF 588 200 0.2±0.02 R EMK042 CH9R5DD-W CH C0H 9.5 p ±0.5pF 590 200 0.2±0.02 R EMK042 CH9R6DD-W CH C0H 9.6 p ±0.5pF 592 200 0.2±0.02 R EMK042 CH9R7DD-W CH C0H 9.7 p ±0.5pF 594 200 0.2±0.02 R EMK042 CH9R8DD-W CH C0H 9.8 p ±0.5pF 596 200 0.2±0.02 R EMK042 CH9R9DD-W CH C0H 9.9 p ±0.5pF 598 200 0.2±0.02 R EMK042 CH100DD-W CH C0H 10 p ±0.5pF 600 200 0.2±0.02 R EMK042 CH110JD-W CH C0H 11 p ±5％ 620 200 0.2±0.02 R EMK042 CH120JD-W CH C0H 12 p ±5％ 640 200 0.2±0.02 R EMK042 CH130JD-W CH C0H 13 p ±5％ 660 200 0.2±0.02 R EMK042 CH150JD-W CH C0H 15 p ±5％ 700 200 0.2±0.02 R EMK042 CH160JC-W CH C0H 16 p ±5％ 720 200 0.2±0.02 R EMK042 CH180JC-W CH C0H 18 p ±5％ 760 200 0.2±0.02 R EMK042 CH200JC-W CH C0H 20 p ±5％ 800 200 0.2±0.02 R EMK042 CH220JC-W CH C0H 22 p ±5％ 840 200 0.2±0.02 R EMK042 CH240JC-W CH C0H 24 p ±5％ 880 200 0.2±0.02 R EMK042 CH270JC-W CH C0H 27 p ±5％ 940 200 0.2±0.02 R EMK042 CH300JC-W CH C0H 30 p ±5％ 1000 200 0.2±0.02 R EMK042 CH330JC-W CH C0H 33 p ±5％ 1000 200 0.2±0.02 R EMK042 CH360JC-W CH C0H 36 p ±5％ 1000 200 0.2±0.02 R EMK042 CH390JC-W CH C0H 39 p ±5％ 1000 200 0.2±0.02 R EMK042 CH430JC-W CH C0H 43 p ±5％ 1000 200 0.2±0.02 R EMK042 CH470JC-W CH C0H 47 p ±5％ 1000 200 0.2±0.02 R EMK042 CH510JC-W CH C0H 51 p ±5％ 1000 200 0.2±0.02 R Part number 1 Part number 2 Rated voltage [V] Thickness*3 [mm] Q (at 1MHz) min Capacitance tolerance [％] Soldering R:Reflow W:Wave Capacitance [F] Temperature characteristics c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ EMK042 CH560JC-W CH C0H 56 p ±5％ 1000 200 0.2±0.02 R EMK042 CH620JC-W CH C0H 62 p ±5％ 1000 200 0.2±0.02 R EMK042 CH680JC-W CH C0H 68 p ±5％ 1000 200 0.2±0.02 R EMK042 CH750JC-W CH C0H 75 p ±5％ 1000 200 0.2±0.02 R EMK042 CH820JC-W CH C0H 82 p ±5％ 1000 200 0.2±0.02 R EMK042 CH910JC-W CH C0H 91 p ±5％ 1000 200 0.2±0.02 R EMK042 CH101JC-W CH C0H 100 p ±5％ 1000 200 0.2±0.02 R

• 063TYPE 【Temperature Characteristic CG : CG/C0G】 0.3mm thickness（T） HTLT Rated voltage x ％ UMK063 CG0R2CT-F CG C0G 0.2 p ±0.25pF 404 200 0.3±0.03 R UMK063 CG0R3CT-F CG C0G 0.3 p ±0.25pF 406 200 0.3±0.03 R UMK063 CG0R4CT-F CG C0G 0.4 p ±0.25pF 408 200 0.3±0.03 R UMK063 CG0R5CT-F CG C0G 0.5 p ±0.25pF 410 200 0.3±0.03 R UMK063 CG0R6CT-F CG C0G 0.6 p ±0.25pF 412 200 0.3±0.03 R UMK063 CG0R7CT-F CG C0G 0.7 p ±0.25pF 414 200 0.3±0.03 R UMK063 CGR75CT-F CG C0G 0.75 p ±0.25pF 415 200 0.3±0.03 R UMK063 CG0R8CT-F CG C0G 0.8 p ±0.25pF 416 200 0.3±0.03 R UMK063 CG0R9CT-F CG C0G 0.9 p ±0.25pF 418 200 0.3±0.03 R UMK063 CG010CT-F CG C0G 1 p ±0.25pF 420 200 0.3±0.03 R UMK063 CG1R1CT-F CG C0G 1.1 p ±0.25pF 422 200 0.3±0.03 R UMK063 CG1R2CT-F CG C0G 1.2 p ±0.25pF 424 200 0.3±0.03 R UMK063 CG1R3CT-F CG C0G 1.3 p ±0.25pF 426 200 0.3±0.03 R UMK063 CG1R4CT-F CG C0G 1.4 p ±0.25pF 428 200 0.3±0.03 R UMK063 CG1R5CT-F CG C0G 1.5 p ±0.25pF 430 200 0.3±0.03 R UMK063 CG1R6CT-F CG C0G 1.6 p ±0.25pF 432 200 0.3±0.03 R UMK063 CG1R7CT-F CG C0G 1.7 p ±0.25pF 434 200 0.3±0.03 R UMK063 CG1R8CT-F CG C0G 1.8 p ±0.25pF 436 200 0.3±0.03 R UMK063 CG1R9CT-F CG C0G 1.9 p ±0.25pF 438 200 0.3±0.03 R UMK063 CG020CT-F CG C0G 2 p ±0.25pF 440 200 0.3±0.03 R UMK063 CG2R1CT-F CG C0G 2.1 p ±0.25pF 442 200 0.3±0.03 R UMK063 CG2R2CT-F CG C0G 2.2 p ±0.25pF 444 200 0.3±0.03 R UMK063 CG2R3CT-F CG C0G 2.3 p ±0.25pF 446 200 0.3±0.03 R UMK063 CG2R4CT-F CG C0G 2.4 p ±0.25pF 448 200 0.3±0.03 R UMK063 CG2R5CT-F CG C0G 2.5 p ±0.25pF 450 200 0.3±0.03 R UMK063 CG2R6CT-F CG C0G 2.6 p ±0.25pF 452 200 0.3±0.03 R UMK063 CG2R7CT-F CG C0G 2.7 p ±0.25pF 454 200 0.3±0.03 R UMK063 CG2R8CT-F CG C0G 2.8 p ±0.25pF 456 200 0.3±0.03 R UMK063 CG2R9CT-F CG C0G 2.9 p ±0.25pF 458 200 0.3±0.03 R UMK063 CG030CT-F CG C0G 3 p ±0.25pF 460 200 0.3±0.03 R UMK063 CG3R1CT-F CG C0G 3.1 p ±0.25pF 462 200 0.3±0.03 R UMK063 CG3R2CT-F CG C0G 3.2 p ±0.25pF 464 200 0.3±0.03 R UMK063 CG3R3CT-F CG C0G 3.3 p ±0.25pF 466 200 0.3±0.03 R UMK063 CG3R4CT-F CG C0G 3.4 p ±0.25pF 468 200 0.3±0.03 R UMK063 CG3R5CT-F CG C0G 3.5 p ±0.25pF 470 200 0.3±0.03 R UMK063 CG3R6CT-F CG C0G 3.6 p ±0.25pF 472 200 0.3±0.03 R UMK063 CG3R7CT-F CG C0G 3.7 p ±0.25pF 474 200 0.3±0.03 R UMK063 CG3R8CT-F CG C0G 3.8 p ±0.25pF 476 200 0.3±0.03 R UMK063 CG3R9CT-F CG C0G 3.9 p ±0.25pF 478 200 0.3±0.03 R UMK063 CG040CT-F CG C0G 4 p ±0.25pF 480 200 0.3±0.03 R UMK063 CG4R1CT-F CG C0G 4.1 p ±0.25pF 482 200 0.3±0.03 R UMK063 CG4R2CT-F CG C0G 4.2 p ±0.25pF 484 200 0.3±0.03 R UMK063 CG4R3CT-F CG C0G 4.3 p ±0.25pF 486 200 0.3±0.03 R UMK063 CG4R4CT-F CG C0G 4.4 p ±0.25pF 488 200 0.3±0.03 R UMK063 CG4R5CT-F CG C0G 4.5 p ±0.25pF 490 200 0.3±0.03 R UMK063 CG4R6CT-F CG C0G 4.6 p ±0.25pF 492 200 0.3±0.03 R UMK063 CG4R7CT-F CG C0G 4.7 p ±0.25pF 494 200 0.3±0.03 R UMK063 CG4R8CT-F CG C0G 4.8 p ±0.25pF 496 200 0.3±0.03 R UMK063 CG4R9CT-F CG C0G 4.9 p ±0.25pF 498 200 0.3±0.03 R UMK063 CG050CT-F CG C0G 5 p ±0.25pF 500 200 0.3±0.03 R UMK063 CG5R1DT-F CG C0G 5.1 p ±0.5pF 502 200 0.3±0.03 R UMK063 CG5R2DT-F CG C0G 5.2 p ±0.5pF 504 200 0.3±0.03 R UMK063 CG5R3DT-F CG C0G 5.3 p ±0.5pF 506 200 0.3±0.03 R UMK063 CG5R4DT-F CG C0G 5.4 p ±0.5pF 508 200 0.3±0.03 R UMK063 CG5R5DT-F CG C0G 5.5 p ±0.5pF 510 200 0.3±0.03 R UMK063 CG5R6DT-F CG C0G 5.6 p ±0.5pF 512 200 0.3±0.03 R UMK063 CG5R7DT-F CG C0G 5.7 p ±0.5pF 514 200 0.3±0.03 R UMK063 CG5R8DT-F CG C0G 5.8 p ±0.5pF 516 200 0.3±0.03 R UMK063 CG5R9DT-F CG C0G 5.9 p ±0.5pF 518 200 0.3±0.03 R UMK063 CG060DT-F CG C0G 6 p ±0.5pF 520 200 0.3±0.03 R UMK063 CG6R1DT-F CG C0G 6.1 p ±0.5pF 522 200 0.3±0.03 R UMK063 CG6R2DT-F CG C0G 6.2 p ±0.5pF 524 200 0.3±0.03 R UMK063 CG6R3DT-F CG C0G 6.3 p ±0.5pF 526 200 0.3±0.03 R UMK063 CG6R4DT-F CG C0G 6.4 p ±0.5pF 528 200 0.3±0.03 R UMK063 CG6R5DT-F CG C0G 6.5 p ±0.5pF 530 200 0.3±0.03 R UMK063 CG6R6DT-F CG C0G 6.6 p ±0.5pF 532 200 0.3±0.03 R UMK063 CG6R7DT-F CG C0G 6.7 p ±0.5pF 534 200 0.3±0.03 R UMK063 CG6R8DT-F CG C0G 6.8 p ±0.5pF 536 200 0.3±0.03 R UMK063 CG6R9DT-F CG C0G 6.9 p ±0.5pF 538 200 0.3±0.03 R UMK063 CG070DT-F CG C0G 7 p ±0.5pF 540 200 0.3±0.03 R UMK063 CG7R1DT-F CG C0G 7.1 p ±0.5pF 542 200 0.3±0.03 R UMK063 CG7R2DT-F CG C0G 7.2 p ±0.5pF 544 200 0.3±0.03 R UMK063 CG7R3DT-F CG C0G 7.3 p ±0.5pF 546 200 0.3±0.03 R UMK063 CG7R4DT-F CG C0G 7.4 p ±0.5pF 548 200 0.3±0.03 R UMK063 CG7R5DT-F CG C0G 7.5 p ±0.5pF 550 200 0.3±0.03 R UMK063 CG7R6DT-F CG C0G 7.6 p ±0.5pF 552 200 0.3±0.03 R Part number 1 Part number 2 Rated voltage [V] Capacitance tolerance [％] Q (at 1MHz) min Temperature characteristics Capacitance [F] Thickness*3 [mm] Q (at 1MHz) min Capacitance tolerance [％] Soldering R:Reflow W:Wave Thickness*3 [mm] Soldering R:Reflow W:Wave Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Capacitance [F] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ UMK063 CG7R7DT-F CG C0G 7.7 p ±0.5pF 554 200 0.3±0.03 R UMK063 CG7R8DT-F CG C0G 7.8 p ±0.5pF 556 200 0.3±0.03 R UMK063 CG7R9DT-F CG C0G 7.9 p ±0.5pF 558 200 0.3±0.03 R UMK063 CG080DT-F CG C0G 8 p ±0.5pF 560 200 0.3±0.03 R UMK063 CG8R1DT-F CG C0G 8.1 p ±0.5pF 562 200 0.3±0.03 R UMK063 CG8R2DT-F CG C0G 8.2 p ±0.5pF 564 200 0.3±0.03 R UMK063 CG8R3DT-F CG C0G 8.3 p ±0.5pF 566 200 0.3±0.03 R UMK063 CG8R4DT-F CG C0G 8.4 p ±0.5pF 568 200 0.3±0.03 R UMK063 CG8R5DT-F CG C0G 8.5 p ±0.5pF 570 200 0.3±0.03 R UMK063 CG8R6DT-F CG C0G 8.6 p ±0.5pF 572 200 0.3±0.03 R UMK063 CG8R7DT-F CG C0G 8.7 p ±0.5pF 574 200 0.3±0.03 R UMK063 CG8R8DT-F CG C0G 8.8 p ±0.5pF 576 200 0.3±0.03 R UMK063 CG8R9DT-F CG C0G 8.9 p ±0.5pF 578 200 0.3±0.03 R UMK063 CG090DT-F CG C0G 9 p ±0.5pF 580 200 0.3±0.03 R UMK063 CG9R1DT-F CG C0G 9.1 p ±0.5pF 582 200 0.3±0.03 R UMK063 CG9R2DT-F CG C0G 9.2 p ±0.5pF 584 200 0.3±0.03 R UMK063 CG9R3DT-F CG C0G 9.3 p ±0.5pF 586 200 0.3±0.03 R UMK063 CG9R4DT-F CG C0G 9.4 p ±0.5pF 588 200 0.3±0.03 R UMK063 CG9R5DT-F CG C0G 9.5 p ±0.5pF 590 200 0.3±0.03 R UMK063 CG9R6DT-F CG C0G 9.6 p ±0.5pF 592 200 0.3±0.03 R UMK063 CG9R7DT-F CG C0G 9.7 p ±0.5pF 594 200 0.3±0.03 R UMK063 CG9R8DT-F CG C0G 9.8 p ±0.5pF 596 200 0.3±0.03 R UMK063 CG9R9DT-F CG C0G 9.9 p ±0.5pF 598 200 0.3±0.03 R UMK063 CG100DT-F CG C0G 10 p ±0.5pF 600 200 0.3±0.03 R UMK063 CG110JT-F CG C0G 11 p ±5％ 620 200 0.3±0.03 R UMK063 CG120JT-F CG C0G 12 p ±5％ 640 200 0.3±0.03 R UMK063 CG130JT-F CG C0G 13 p ±5％ 660 200 0.3±0.03 R UMK063 CG150JT-F CG C0G 15 p ±5％ 700 200 0.3±0.03 R UMK063 CG160JT-F CG C0G 16 p ±5％ 720 200 0.3±0.03 R UMK063 CG180JT-F CG C0G 18 p ±5％ 760 200 0.3±0.03 R UMK063 CG200JT-F CG C0G 20 p ±5％ 800 200 0.3±0.03 R UMK063 CG220JT-F CG C0G 22 p ±5％ 840 200 0.3±0.03 R UMK063 CG240JT-F CG C0G 24 p ±5％ 880 200 0.3±0.03 R UMK063 CG270JT-F CG C0G 27 p ±5％ 940 200 0.3±0.03 R UMK063 CG300JT-F CG C0G 30 p ±5％ 1000 200 0.3±0.03 R UMK063 CG330JT-F CG C0G 33 p ±5％ 1000 200 0.3±0.03 R UMK063 CG360JT-F CG C0G 36 p ±5％ 1000 200 0.3±0.03 R UMK063 CG390JT-F CG C0G 39 p ±5％ 1000 200 0.3±0.03 R UMK063 CG430JT-F CG C0G 43 p ±5％ 1000 200 0.3±0.03 R UMK063 CG470JT-F CG C0G 47 p ±5％ 1000 200 0.3±0.03 R UMK063 CG510JT-F CG C0G 51 p ±5％ 1000 200 0.3±0.03 R UMK063 CG560JT-F CG C0G 56 p ±5％ 1000 200 0.3±0.03 R UMK063 CG620JT-F CG C0G 62 p ±5％ 1000 200 0.3±0.03 R UMK063 CG680JT-F CG C0G 68 p ±5％ 1000 200 0.3±0.03 R UMK063 CG750JT-F CG C0G 75 p ±5％ 1000 200 0.3±0.03 R UMK063 CG820JT-F CG C0G 82 p ±5％ 1000 200 0.3±0.03 R UMK063 CG910JT-F CG C0G 91 p ±5％ 1000 200 0.3±0.03 R UMK063 CG101JT-F CG C0G 100 p ±5％ 1000 200 0.3±0.03 R TMK063 CG111JT-F CG C0G 110 p ±5％ 1000 200 0.3±0.03 R TMK063 CG121JT-F CG C0G 120 p ±5％ 1000 200 0.3±0.03 R TMK063 CG131JT-F CG C0G 130 p ±5％ 1000 200 0.3±0.03 R TMK063 CG151JT-F CG C0G 150 p ±5％ 1000 200 0.3±0.03 R TMK063 CG181JT-F CG C0G 180 p ±5％ 1000 200 0.3±0.03 R TMK063 CG201JT-F CG C0G 200 p ±5％ 1000 200 0.3±0.03 R TMK063 CG221JT-F CG C0G 220 p ±5％ 1000 200 0.3±0.03 R 【Temperature Characteristic C△ : C△/C0△】 0.3mm thickness（T） HTLT Rated voltage x ％ UMK063 CK0R2CT-F CK C0K 0.2 p ±0.25pF 404 200 0.3±0.03 R UMK063 CK0R3CT-F CK C0K 0.3 p ±0.25pF 406 200 0.3±0.03 R UMK063 CK0R4CT-F CK C0K 0.4 p ±0.25pF 408 200 0.3±0.03 R UMK063 CK0R5CT-F CK C0K 0.5 p ±0.25pF 410 200 0.3±0.03 R UMK063 CK0R6CT-F CK C0K 0.6 p ±0.25pF 412 200 0.3±0.03 R UMK063 CK0R7CT-F CK C0K 0.7 p ±0.25pF 414 200 0.3±0.03 R UMK063 CKR75CT-F CK C0K 0.75 p ±0.25pF 415 200 0.3±0.03 R UMK063 CK0R8CT-F CK C0K 0.8 p ±0.25pF 416 200 0.3±0.03 R UMK063 CK0R9CT-F CK C0K 0.9 p ±0.25pF 418 200 0.3±0.03 R UMK063 CK010CT-F CK C0K 1 p ±0.25pF 420 200 0.3±0.03 R UMK063 CK1R1CT-F CK C0K 1.1 p ±0.25pF 422 200 0.3±0.03 R UMK063 CK1R2CT-F CK C0K 1.2 p ±0.25pF 424 200 0.3±0.03 R UMK063 CK1R3CT-F CK C0K 1.3 p ±0.25pF 426 200 0.3±0.03 R UMK063 CK1R4CT-F CK C0K 1.4 p ±0.25pF 428 200 0.3±0.03 R UMK063 CK1R5CT-F CK C0K 1.5 p ±0.25pF 430 200 0.3±0.03 R UMK063 CK1R6CT-F CK C0K 1.6 p ±0.25pF 432 200 0.3±0.03 R UMK063 CK1R7CT-F CK C0K 1.7 p ±0.25pF 434 200 0.3±0.03 R UMK063 CK1R8CT-F CK C0K 1.8 p ±0.25pF 436 200 0.3±0.03 R UMK063 CK1R9CT-F CK C0K 1.9 p ±0.25pF 438 200 0.3±0.03 R UMK063 CK020CT-F CK C0K 2 p ±0.25pF 440 200 0.3±0.03 R UMK063 CK2R1CT-F CK C0K 2.1 p ±0.25pF 442 200 0.3±0.03 R UMK063 CK2R2CT-F CK C0K 2.2 p ±0.25pF 444 200 0.3±0.03 R UMK063 CK2R3CT-F CK C0K 2.3 p ±0.25pF 446 200 0.3±0.03 R UMK063 CK2R4CT-F CK C0K 2.4 p ±0.25pF 448 200 0.3±0.03 R UMK063 CK2R5CT-F CK C0K 2.5 p ±0.25pF 450 200 0.3±0.03 R UMK063 CK2R6CT-F CK C0K 2.6 p ±0.25pF 452 200 0.3±0.03 R UMK063 CK2R7CT-F CK C0K 2.7 p ±0.25pF 454 200 0.3±0.03 R UMK063 CK2R8CT-F CK C0K 2.8 p ±0.25pF 456 200 0.3±0.03 R UMK063 CK2R9CT-F CK C0K 2.9 p ±0.25pF 458 200 0.3±0.03 R Thickness*3 [mm] Thickness*3 [mm] Q (at 1MHz) min Soldering R:Reflow W:Wave Capacitance tolerance [％] Soldering R:Reflow W:Wave Part number 1 Part number 2 Temperature characteristics Rated voltage [V] Part number 1 Part number 2 Capacitance [F] Capacitance [F] Capacitance tolerance [％] Q (at 1MHz) min Temperature characteristics Rated voltage [V] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ UMK063 CJ030CT-F CJ C0J 3 p ±0.25pF 460 200 0.3±0.03 R UMK063 CJ3R1CT-F CJ C0J 3.1 p ±0.25pF 462 200 0.3±0.03 R UMK063 CJ3R2CT-F CJ C0J 3.2 p ±0.25pF 464 200 0.3±0.03 R UMK063 CJ3R3CT-F CJ C0J 3.3 p ±0.25pF 466 200 0.3±0.03 R UMK063 CJ3R4CT-F CJ C0J 3.4 p ±0.25pF 468 200 0.3±0.03 R UMK063 CJ3R5CT-F CJ C0J 3.5 p ±0.25pF 470 200 0.3±0.03 R UMK063 CJ3R6CT-F CJ C0J 3.6 p ±0.25pF 472 200 0.3±0.03 R UMK063 CJ3R7CT-F CJ C0J 3.7 p ±0.25pF 474 200 0.3±0.03 R UMK063 CJ3R8CT-F CJ C0J 3.8 p ±0.25pF 476 200 0.3±0.03 R UMK063 CJ3R9CT-F CJ C0J 3.9 p ±0.25pF 478 200 0.3±0.03 R UMK063 CH040CT-F CH C0H 4 p ±0.25pF 480 200 0.3±0.03 R UMK063 CH4R1CT-F CH C0H 4.1 p ±0.25pF 482 200 0.3±0.03 R UMK063 CH4R2CT-F CH C0H 4.2 p ±0.25pF 484 200 0.3±0.03 R UMK063 CH4R3CT-F CH C0H 4.3 p ±0.25pF 486 200 0.3±0.03 R UMK063 CH4R4CT-F CH C0H 4.4 p ±0.25pF 488 200 0.3±0.03 R UMK063 CH4R5CT-F CH C0H 4.5 p ±0.25pF 490 200 0.3±0.03 R UMK063 CH4R6CT-F CH C0H 4.6 p ±0.25pF 492 200 0.3±0.03 R UMK063 CH4R7CT-F CH C0H 4.7 p ±0.25pF 494 200 0.3±0.03 R UMK063 CH4R8CT-F CH C0H 4.8 p ±0.25pF 496 200 0.3±0.03 R UMK063 CH4R9CT-F CH C0H 4.9 p ±0.25pF 498 200 0.3±0.03 R UMK063 CH050CT-F CH C0H 5 p ±0.25pF 500 200 0.3±0.03 R UMK063 CH5R1DT-F CH C0H 5.1 p ±0.5pF 502 200 0.3±0.03 R UMK063 CH5R2DT-F CH C0H 5.2 p ±0.5pF 504 200 0.3±0.03 R UMK063 CH5R3DT-F CH C0H 5.3 p ±0.5pF 506 200 0.3±0.03 R UMK063 CH5R4DT-F CH C0H 5.4 p ±0.5pF 508 200 0.3±0.03 R UMK063 CH5R5DT-F CH C0H 5.5 p ±0.5pF 510 200 0.3±0.03 R UMK063 CH5R6DT-F CH C0H 5.6 p ±0.5pF 512 200 0.3±0.03 R UMK063 CH5R7DT-F CH C0H 5.7 p ±0.5pF 514 200 0.3±0.03 R UMK063 CH5R8DT-F CH C0H 5.8 p ±0.5pF 516 200 0.3±0.03 R UMK063 CH5R9DT-F CH C0H 5.9 p ±0.5pF 518 200 0.3±0.03 R UMK063 CH060DT-F CH C0H 6 p ±0.5pF 520 200 0.3±0.03 R UMK063 CH6R1DT-F CH C0H 6.1 p ±0.5pF 522 200 0.3±0.03 R UMK063 CH6R2DT-F CH C0H 6.2 p ±0.5pF 524 200 0.3±0.03 R UMK063 CH6R3DT-F CH C0H 6.3 p ±0.5pF 526 200 0.3±0.03 R UMK063 CH6R4DT-F CH C0H 6.4 p ±0.5pF 528 200 0.3±0.03 R UMK063 CH6R5DT-F CH C0H 6.5 p ±0.5pF 530 200 0.3±0.03 R UMK063 CH6R6DT-F CH C0H 6.6 p ±0.5pF 532 200 0.3±0.03 R UMK063 CH6R7DT-F CH C0H 6.7 p ±0.5pF 534 200 0.3±0.03 R UMK063 CH6R8DT-F CH C0H 6.8 p ±0.5pF 536 200 0.3±0.03 R UMK063 CH6R9DT-F CH C0H 6.9 p ±0.5pF 538 200 0.3±0.03 R UMK063 CH070DT-F CH C0H 7 p ±0.5pF 540 200 0.3±0.03 R UMK063 CH7R1DT-F CH C0H 7.1 p ±0.5pF 542 200 0.3±0.03 R UMK063 CH7R2DT-F CH C0H 7.2 p ±0.5pF 544 200 0.3±0.03 R UMK063 CH7R3DT-F CH C0H 7.3 p ±0.5pF 546 200 0.3±0.03 R UMK063 CH7R4DT-F CH C0H 7.4 p ±0.5pF 548 200 0.3±0.03 R UMK063 CH7R5DT-F CH C0H 7.5 p ±0.5pF 550 200 0.3±0.03 R UMK063 CH7R6DT-F CH C0H 7.6 p ±0.5pF 552 200 0.3±0.03 R UMK063 CH7R7DT-F CH C0H 7.7 p ±0.5pF 554 200 0.3±0.03 R UMK063 CH7R8DT-F CH C0H 7.8 p ±0.5pF 556 200 0.3±0.03 R UMK063 CH7R9DT-F CH C0H 7.9 p ±0.5pF 558 200 0.3±0.03 R UMK063 CH080DT-F CH C0H 8 p ±0.5pF 560 200 0.3±0.03 R UMK063 CH8R1DT-F CH C0H 8.1 p ±0.5pF 562 200 0.3±0.03 R UMK063 CH8R2DT-F CH C0H 8.2 p ±0.5pF 564 200 0.3±0.03 R UMK063 CH8R3DT-F CH C0H 8.3 p ±0.5pF 566 200 0.3±0.03 R UMK063 CH8R4DT-F CH C0H 8.4 p ±0.5pF 568 200 0.3±0.03 R UMK063 CH8R5DT-F CH C0H 8.5 p ±0.5pF 570 200 0.3±0.03 R UMK063 CH8R6DT-F CH C0H 8.6 p ±0.5pF 572 200 0.3±0.03 R UMK063 CH8R7DT-F CH C0H 8.7 p ±0.5pF 574 200 0.3±0.03 R UMK063 CH8R8DT-F CH C0H 8.8 p ±0.5pF 576 200 0.3±0.03 R UMK063 CH8R9DT-F CH C0H 8.9 p ±0.5pF 578 200 0.3±0.03 R UMK063 CH090DT-F CH C0H 9 p ±0.5pF 580 200 0.3±0.03 R UMK063 CH9R1DT-F CH C0H 9.1 p ±0.5pF 582 200 0.3±0.03 R UMK063 CH9R2DT-F CH C0H 9.2 p ±0.5pF 584 200 0.3±0.03 R UMK063 CH9R3DT-F CH C0H 9.3 p ±0.5pF 586 200 0.3±0.03 R UMK063 CH9R4DT-F CH C0H 9.4 p ±0.5pF 588 200 0.3±0.03 R UMK063 CH9R5DT-F CH C0H 9.5 p ±0.5pF 590 200 0.3±0.03 R UMK063 CH9R6DT-F CH C0H 9.6 p ±0.5pF 592 200 0.3±0.03 R UMK063 CH9R7DT-F CH C0H 9.7 p ±0.5pF 594 200 0.3±0.03 R UMK063 CH9R8DT-F CH C0H 9.8 p ±0.5pF 596 200 0.3±0.03 R UMK063 CH9R9DT-F CH C0H 9.9 p ±0.5pF 598 200 0.3±0.03 R UMK063 CH100DT-F CH C0H 10 p ±0.5pF 600 200 0.3±0.03 R UMK063 CH110JT-F CH C0H 11 p ±5％ 620 200 0.3±0.03 R UMK063 CH120JT-F CH C0H 12 p ±5％ 640 200 0.3±0.03 R UMK063 CH130JT-F CH C0H 13 p ±5％ 660 200 0.3±0.03 R UMK063 CH150JT-F CH C0H 15 p ±5％ 700 200 0.3±0.03 R UMK063 CH160JT-F CH C0H 16 p ±5％ 720 200 0.3±0.03 R UMK063 CH180JT-F CH C0H 18 p ±5％ 760 200 0.3±0.03 R UMK063 CH200JT-F CH C0H 20 p ±5％ 800 200 0.3±0.03 R UMK063 CH220JT-F CH C0H 22 p ±5％ 840 200 0.3±0.03 R UMK063 CH240JT-F CH C0H 24 p ±5％ 880 200 0.3±0.03 R UMK063 CH270JT-F CH C0H 27 p ±5％ 940 200 0.3±0.03 R UMK063 CH300JT-F CH C0H 30 p ±5％ 1000 200 0.3±0.03 R UMK063 CH330JT-F CH C0H 33 p ±5％ 1000 200 0.3±0.03 R UMK063 CH360JT-F CH C0H 36 p ±5％ 1000 200 0.3±0.03 R UMK063 CH390JT-F CH C0H 39 p ±5％ 1000 200 0.3±0.03 R UMK063 CH430JT-F CH C0H 43 p ±5％ 1000 200 0.3±0.03 R UMK063 CH470JT-F CH C0H 47 p ±5％ 1000 200 0.3±0.03 R UMK063 CH510JT-F CH C0H 51 p ±5％ 1000 200 0.3±0.03 R Capacitance [F] Capacitance tolerance [％] Q (at 1MHz) min Soldering R:Reflow W:Wave Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Thickness*3 [mm] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ UMK063 CH560JT-F CH C0H 56 p ±5％ 1000 200 0.3±0.03 R UMK063 CH620JT-F CH C0H 62 p ±5％ 1000 200 0.3±0.03 R UMK063 CH680JT-F CH C0H 68 p ±5％ 1000 200 0.3±0.03 R UMK063 CH750JT-F CH C0H 75 p ±5％ 1000 200 0.3±0.03 R UMK063 CH820JT-F CH C0H 82 p ±5％ 1000 200 0.3±0.03 R UMK063 CH910JT-F CH C0H 91 p ±5％ 1000 200 0.3±0.03 R UMK063 CH101JT-F CH C0H 100 p ±5％ 1000 200 0.3±0.03 R TMK063 CH111JT-F CH C0H 110 p ±5％ 1000 200 0.3±0.03 R TMK063 CH121JT-F CH C0H 120 p ±5％ 1000 200 0.3±0.03 R TMK063 CH131JT-F CH C0H 130 p ±5％ 1000 200 0.3±0.03 R TMK063 CH151JT-F CH C0H 150 p ±5％ 1000 200 0.3±0.03 R TMK063 CH181JT-F CH C0H 180 p ±5％ 1000 200 0.3±0.03 R TMK063 CH201JT-F CH C0H 200 p ±5％ 1000 200 0.3±0.03 R TMK063 CH221JT-F CH C0H 220 p ±5％ 1000 200 0.3±0.03 R

• 105TYPE 【Temperature Characteristic CG : CG/C0G】 0.5mm thickness（V） HTLT Rated voltage x ％ UMK105 CG0R5CV-F CG C0G 0.5 p ±0.25pF 410 200 0.5±0.05 R UMK105 CG010CV-F CG C0G 1 p ±0.25pF 420 200 0.5±0.05 R UMK105 CG1R5CV-F CG C0G 1.5 p ±0.25pF 430 200 0.5±0.05 R UMK105 CG020CV-F CG C0G 2 p ±0.25pF 440 200 0.5±0.05 R UMK105 CG030CV-F CG C0G 3 p ±0.25pF 460 200 0.5±0.05 R UMK105 CG040CV-F CG C0G 4 p ±0.25pF 480 200 0.5±0.05 R UMK105 CG050CV-F CG C0G 5 p ±0.25pF 500 200 0.5±0.05 R UMK105 CG060DV-F CG C0G 6 p ±0.5pF 520 200 0.5±0.05 R UMK105 CG070DV-F CG C0G 7 p ±0.5pF 540 200 0.5±0.05 R UMK105 CG080DV-F CG C0G 8 p ±0.5pF 560 200 0.5±0.05 R UMK105 CG090DV-F CG C0G 9 p ±0.5pF 580 200 0.5±0.05 R UMK105 CG100DV-F CG C0G 10 p ±0.5pF 600 200 0.5±0.05 R UMK105 CG120JV-F CG C0G 12 p ±5％ 640 200 0.5±0.05 R UMK105 CG150JV-F CG C0G 15 p ±5％ 700 200 0.5±0.05 R UMK105 CG180JV-F CG C0G 18 p ±5％ 760 200 0.5±0.05 R UMK105 CG220JV-F CG C0G 22 p ±5％ 840 200 0.5±0.05 R UMK105 CG270JV-F CG C0G 27 p ±5％ 940 200 0.5±0.05 R UMK105 CG330JV-F CG C0G 33 p ±5％ 1000 200 0.5±0.05 R UMK105 CG390JV-F CG C0G 39 p ±5％ 1000 200 0.5±0.05 R UMK105 CG470JV-F CG C0G 47 p ±5％ 1000 200 0.5±0.05 R UMK105 CG560JV-F CG C0G 56 p ±5％ 1000 200 0.5±0.05 R UMK105 CG680JV-F CG C0G 68 p ±5％ 1000 200 0.5±0.05 R UMK105 CG820JV-F CG C0G 82 p ±5％ 1000 200 0.5±0.05 R UMK105 CG101JV-F CG C0G 100 p ±5％ 1000 200 0.5±0.05 R UMK105 CG121JV-F CG C0G 120 p ±5％ 1000 200 0.5±0.05 R UMK105 CG151JV-F CG C0G 150 p ±5％ 1000 200 0.5±0.05 R UMK105 CG181JV-F CG C0G 180 p ±5％ 1000 200 0.5±0.05 R UMK105 CG221JV-F CG C0G 220 p ±5％ 1000 200 0.5±0.05 R UMK105 CG271JV-F CG C0G 270 p ±5％ 1000 200 0.5±0.05 R UMK105 CG331JV-F CG C0G 330 p ±5％ 1000 200 0.5±0.05 R UMK105 CG361JV-F CG C0G 360 p ±5％ 1000 200 0.5±0.05 R UMK105 CG391JV-F CG C0G 390 p ±5％ 1000 200 0.5±0.05 R UMK105 CG431JV-F CG C0G 430 p ±5％ 1000 200 0.5±0.05 R UMK105 CG471JV-F CG C0G 470 p ±5％ 1000 200 0.5±0.05 R UMK105 CG511JV-F CG C0G 510 p ±5％ 1000 200 0.5±0.05 R UMK105 CG561JV-F CG C0G 560 p ±5％ 1000 200 0.5±0.05 R UMK105 CG621JV-F CG C0G 620 p ±5％ 1000 200 0.5±0.05 R UMK105 CG681JV-F CG C0G 680 p ±5％ 1000 200 0.5±0.05 R UMK105 CG751JV-F CG C0G 750 p ±5％ 1000 200 0.5±0.05 R UMK105 CG821JV-F CG C0G 820 p ±5％ 1000 200 0.5±0.05 R UMK105 CG102JV-F CG C0G 1000 p ±5％ 1000 200 0.5±0.05 R 【Temperature Characteristic C△ : C△/C0△】 0.5mm thickness（V） HTLT Rated voltage x ％ UMK105 CK0R5CV-F CK C0K 0.5 p ±0.25pF 410 200 0.5±0.05 R UMK105 CK010CV-F CK C0K 1 p ±0.25pF 420 200 0.5±0.05 R UMK105 CK1R5CV-F CK C0K 1.5 p ±0.25pF 430 200 0.5±0.05 R UMK105 CK020CV-F CK C0K 2 p ±0.25pF 440 200 0.5±0.05 R UMK105 CJ030CV-F CJ C0J 3 p ±0.25pF 460 200 0.5±0.05 R UMK105 CH040CV-F CH C0H 4 p ±0.25pF 480 200 0.5±0.05 R UMK105 CH050CV-F CH C0H 5 p ±0.25pF 500 200 0.5±0.05 R UMK105 CH060DV-F CH C0H 6 p ±0.5pF 520 200 0.5±0.05 R UMK105 CH070DV-F CH C0H 7 p ±0.5pF 540 200 0.5±0.05 R UMK105 CH080DV-F CH C0H 8 p ±0.5pF 560 200 0.5±0.05 R UMK105 CH090DV-F CH C0H 9 p ±0.5pF 580 200 0.5±0.05 R UMK105 CH100DV-F CH C0H 10 p ±0.5pF 600 200 0.5±0.05 R UMK105 CH120JV-F CH C0H 12 p ±5％ 640 200 0.5±0.05 R UMK105 CH150JV-F CH C0H 15 p ±5％ 700 200 0.5±0.05 R UMK105 CH180JV-F CH C0H 18 p ±5％ 760 200 0.5±0.05 R UMK105 CH220JV-F CH C0H 22 p ±5％ 840 200 0.5±0.05 R UMK105 CH270JV-F CH C0H 27 p ±5％ 940 200 0.5±0.05 R UMK105 CH330JV-F CH C0H 33 p ±5％ 1000 200 0.5±0.05 R UMK105 CH390JV-F CH C0H 39 p ±5％ 1000 200 0.5±0.05 R UMK105 CH470JV-F CH C0H 47 p ±5％ 1000 200 0.5±0.05 R UMK105 CH560JV-F CH C0H 56 p ±5％ 1000 200 0.5±0.05 R UMK105 CH680JV-F CH C0H 68 p ±5％ 1000 200 0.5±0.05 R UMK105 CH820JV-F CH C0H 82 p ±5％ 1000 200 0.5±0.05 R Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Part number 1 Capacitance [F] Capacitance [F] Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] Soldering R:Reflow W:Wave Capacitance tolerance [％] Soldering R:Reflow W:Wave Q (at 1MHz) min Part number 1 Part number 2 Soldering R:Reflow W:Wave Capacitance tolerance [％] Q (at 1MHz) min Capacitance tolerance [％] Temperature characteristics Q (at 1MHz) min Rated voltage [V] Temperature characteristics Capacitance [F] Part number 2 Rated voltage [V] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ UMK105 CH101JV-F CH C0H 100 p ±5％ 1000 200 0.5±0.05 R UMK105 CH121JV-F CH C0H 120 p ±5％ 1000 200 0.5±0.05 R UMK105 CH151JV-F CH C0H 150 p ±5％ 1000 200 0.5±0.05 R UMK105 CH181JV-F CH C0H 180 p ±5％ 1000 200 0.5±0.05 R UMK105 CH221JV-F CH C0H 220 p ±5％ 1000 200 0.5±0.05 R UMK105 CH271JV-F CH C0H 270 p ±5％ 1000 200 0.5±0.05 R UMK105 CH331JV-F CH C0H 330 p ±5％ 1000 200 0.5±0.05 R UMK105 CH361JV-F CH C0H 360 p ±5％ 1000 200 0.5±0.05 R UMK105 CH391JV-F CH C0H 390 p ±5％ 1000 200 0.5±0.05 R UMK105 CH431JV-F CH C0H 430 p ±5％ 1000 200 0.5±0.05 R UMK105 CH471JV-F CH C0H 470 p ±5％ 1000 200 0.5±0.05 R UMK105 CH511JV-F CH C0H 510 p ±5％ 1000 200 0.5±0.05 R UMK105 CH561JV-F CH C0H 560 p ±5％ 1000 200 0.5±0.05 R UMK105 CH621JV-F CH C0H 620 p ±5％ 1000 200 0.5±0.05 R UMK105 CH681JV-F CH C0H 680 p ±5％ 1000 200 0.5±0.05 R UMK105 CH751JV-F CH C0H 750 p ±5％ 1000 200 0.5±0.05 R UMK105 CH821JV-F CH C0H 820 p ±5％ 1000 200 0.5±0.05 R UMK105 CH102JV-F CH C0H 1000 p ±5％ 1000 200 0.5±0.05 R 【Temperature Characteristic U△ : U△/U2△】 0.5mm thickness（V） HTLT Rated voltage x ％ UMK105 UK0R5CV-F UK U2K 0.5 p ±0.25pF 410 200 0.5±0.05 R UMK105 UK010CV-F UK U2K 1 p ±0.25pF 420 200 0.5±0.05 R UMK105 UK1R5CV-F UK U2K 1.5 p ±0.25pF 430 200 0.5±0.05 R UMK105 UK020CV-F UK U2K 2 p ±0.25pF 440 200 0.5±0.05 R UMK105 UK030CV-F UK U2K 3 p ±0.25pF 460 200 0.5±0.05 R UMK105 UJ040CV-F UJ U2J 4 p ±0.25pF 480 200 0.5±0.05 R UMK105 UJ050CV-F UJ U2J 5 p ±0.25pF 500 200 0.5±0.05 R UMK105 UJ060DV-F UJ U2J 6 p ±0.5pF 520 200 0.5±0.05 R UMK105 UJ070DV-F UJ U2J 7 p ±0.5pF 540 200 0.5±0.05 R UMK105 UJ080DV-F UJ U2J 8 p ±0.5pF 560 200 0.5±0.05 R UMK105 UJ090DV-F UJ U2J 9 p ±0.5pF 580 200 0.5±0.05 R UMK105 UJ100DV-F UJ U2J 10 p ±0.5pF 600 200 0.5±0.05 R UMK105 UJ120JV-F UJ U2J 12 p ±5％ 640 200 0.5±0.05 R UMK105 UJ150JV-F UJ U2J 15 p ±5％ 700 200 0.5±0.05 R UMK105 UJ180JV-F UJ U2J 18 p ±5％ 760 200 0.5±0.05 R UMK105 UJ220JV-F UJ U2J 22 p ±5％ 840 200 0.5±0.05 R UMK105 UJ270JV-F UJ U2J 27 p ±5％ 940 200 0.5±0.05 R UMK105 UJ330JV-F UJ U2J 33 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ390JV-F UJ U2J 39 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ470JV-F UJ U2J 47 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ560JV-F UJ U2J 56 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ680JV-F UJ U2J 68 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ820JV-F UJ U2J 82 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ101JV-F UJ U2J 100 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ121JV-F UJ U2J 120 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ151JV-F UJ U2J 150 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ181JV-F UJ U2J 180 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ221JV-F UJ U2J 220 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ271JV-F UJ U2J 270 p ±5％ 1000 200 0.5±0.05 R UMK105 UJ331JV-F UJ U2J 330 p ±5％ 1000 200 0.5±0.05 R 【Temperature Characteristic SL】 0.5mm thickness（V） HTLT Rated voltage x ％ UMK105 SL121JV-F SL 120 p ±5％ 1000 200 0.5±0.05 R UMK105 SL151JV-F SL 150 p ±5％ 1000 200 0.5±0.05 R UMK105 SL181JV-F SL 180 p ±5％ 1000 200 0.5±0.05 R UMK105 SL221JV-F SL 220 p ±5％ 1000 200 0.5±0.05 R UMK105 SL271JV-F SL 270 p ±5％ 1000 200 0.5±0.05 R UMK105 SL331JV-F SL 330 p ±5％ 1000 200 0.5±0.05 R Multilayer Ceramic Capacitors for High Frequency Applications (1GHz+)

• 042TYPE 【Temperature Characteristic CH : CH/C0H】 0.2mm thickness（C） HTLT Rated voltage x ％ TVS042 CH010[]C-W CH C0H 1 p ±0.1pF, 0.25pF 300 200 0.2±0.02 R TVS042 CH020[]C-W CH C0H 2 p ±0.1pF, 0.25pF 190 200 0.2±0.02 R Soldering R:Reflow W:Wave Thickness*3 [mm] Capacitance tolerance [％] Capacitance tolerance [％] Q (at 1MHz) min Thickness*3 [mm] Soldering R:Reflow W:Wave Thickness*3 [mm] Thickness*3 [mm] Rated voltage [V] Capacitance [F] Temperature characteristics Capacitance [F] Part number 1 Part number 2 Part number 1 Q (at 1MHz) min Q (at 1MHz) min Temperature characteristics Temperature characteristics Capacitance tolerance [％] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Rated voltage [V] Part number 2 Capacitance [F] Part number 1 Rated voltage [V] Part number 2 Temperature characteristics Capacitance [F] Capacitance tolerance [％] Q (at 1GHz) (min) Part number 1 Part number 2 Rated voltage [V] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER HTLT Rated voltage x ％ TVS042 CH030[]C-W CH C0H 3 p ±0.1pF, 0.25pF 130 200 0.2±0.02 R TVS042 CH040[]C-W CH C0H 4 p ±0.1pF, 0.25pF 90 200 0.2±0.02 R TVS042 CH050[]C-W CH C0H 5 p ±0.1pF, 0.25pF 80 200 0.2±0.02 R TVS042 CH060[]C-W CH C0H 6 p ±0.25pF, 0.5pF 65 200 0.2±0.02 R TVS042 CH070[]C-W CH C0H 7 p ±0.25pF, 0.5pF 60 200 0.2±0.02 R TVS042 CH080[]C-W CH C0H 8 p ±0.25pF, 0.5pF 55 200 0.2±0.02 R TVS042 CH090[]C-W CH C0H 9 p ±0.25pF, 0.5pF 50 200 0.2±0.02 R TVS042 CH100[]C-W CH C0H 10 p ±2%, ±5% 45 200 0.2±0.02 R TVS042 CH110JC-W CH C0H 11 p ±5% 40 200 0.2±0.02 R TVS042 CH120JC-W CH C0H 12 p ±5% 40 200 0.2±0.02 R TVS042 CH130JC-W CH C0H 13 p ±5% 40 200 0.2±0.02 R TVS042 CH150JC-W CH C0H 15 p ±5% 40 200 0.2±0.02 R TVS042 CH160JC-W CH C0H 16 p ±5% 40 200 0.2±0.02 R TVS042 CH180JC-W CH C0H 18 p ±5% 40 200 0.2±0.02 R TVS042 CH220JC-W CH C0H 22 p ±5% 30 200 0.2±0.02 R

• 105TYPE 【Temperature Characteristic CH : CH/C0H】 0.5mm thickness（W） HTLT Rated voltage x ％ EVK105 CH0R3BW-F CH C0H 0.3 p ±0.1pF 300 200 0.5±0.05 R EVK105 CH0R4BW-F CH C0H 0.4 p ±0.1pF 300 200 0.5±0.05 R EVK105 CH0R5BW-F CH C0H 0.5 p ±0.1pF 300 200 0.5±0.05 R EVK105 CH0R6BW-F CH C0H 0.6 p ±0.1pF 300 200 0.5±0.05 R EVK105 CH0R7BW-F CH C0H 0.7 p ±0.1pF 300 200 0.5±0.05 R EVK105 CH0R8BW-F CH C0H 0.8 p ±0.1pF 300 200 0.5±0.05 R EVK105 CH0R9BW-F CH C0H 0.9 p ±0.1pF 300 200 0.5±0.05 R EVK105 CH010BW-F CH C0H 1 p ±0.1pF 300 200 0.5±0.05 R EVK105 CH1R1BW-F CH C0H 1.1 p ±0.1pF 280 200 0.5±0.05 R EVK105 CH1R2BW-F CH C0H 1.2 p ±0.1pF 270 200 0.5±0.05 R EVK105 CH1R3BW-F CH C0H 1.3 p ±0.1pF 260 200 0.5±0.05 R EVK105 CH1R5BW-F CH C0H 1.5 p ±0.1pF 240 200 0.5±0.05 R EVK105 CH1R6BW-F CH C0H 1.6 p ±0.1pF 230 200 0.5±0.05 R EVK105 CH1R8BW-F CH C0H 1.8 p ±0.1pF 210 200 0.5±0.05 R EVK105 CH020BW-F CH C0H 2 p ±0.1pF 190 200 0.5±0.05 R EVK105 CH2R2JW-F CH C0H 2.2 p ±5％ 180 200 0.5±0.05 R EVK105 CH2R4JW-F CH C0H 2.4 p ±5％ 170 200 0.5±0.05 R EVK105 CH2R7JW-F CH C0H 2.7 p ±5％ 150 200 0.5±0.05 R EVK105 CH030JW-F CH C0H 3 p ±5％ 130 200 0.5±0.05 R EVK105 CH3R3JW-F CH C0H 3.3 p ±5％ 120 200 0.5±0.05 R EVK105 CH3R6JW-F CH C0H 3.6 p ±5％ 110 200 0.5±0.05 R EVK105 CH3R9JW-F CH C0H 3.9 p ±5％ 99 200 0.5±0.05 R EVK105 CH4R3JW-F CH C0H 4.3 p ±5％ 84 200 0.5±0.05 R EVK105 CH4R7JW-F CH C0H 4.7 p ±5％ 84 200 0.5±0.05 R EVK105 CH5R1JW-F CH C0H 5.1 p ±5％ 84 200 0.5±0.05 R 【Temperature Characteristic CH : CH/C0H】 0.5mm thickness（W） HTLT Rated voltage x ％ UVK105 CH0R3BW-F CH C0H 0.3 p ±0.1pF 300 200 0.5±0.05 R UVK105 CH0R4BW-F CH C0H 0.4 p ±0.1pF 300 200 0.5±0.05 R UVK105 CH0R5BW-F CH C0H 0.5 p ±0.1pF 300 200 0.5±0.05 R UVK105 CH0R6BW-F CH C0H 0.6 p ±0.1pF 300 200 0.5±0.05 R UVK105 CH0R7BW-F CH C0H 0.7 p ±0.1pF 300 200 0.5±0.05 R UVK105 CH0R8BW-F CH C0H 0.8 p ±0.1pF 300 200 0.5±0.05 R UVK105 CH0R9BW-F CH C0H 0.9 p ±0.1pF 300 200 0.5±0.05 R UVK105 CH010BW-F CH C0H 1 p ±0.1pF 300 200 0.5±0.05 R UVK105 CH1R1BW-F CH C0H 1.1 p ±0.1pF 280 200 0.5±0.05 R UVK105 CH1R2BW-F CH C0H 1.2 p ±0.1pF 270 200 0.5±0.05 R UVK105 CH1R3BW-F CH C0H 1.3 p ±0.1pF 260 200 0.5±0.05 R UVK105 CH1R5BW-F CH C0H 1.5 p ±0.1pF 240 200 0.5±0.05 R UVK105 CH1R6BW-F CH C0H 1.6 p ±0.1pF 230 200 0.5±0.05 R UVK105 CH1R8BW-F CH C0H 1.8 p ±0.1pF 210 200 0.5±0.05 R UVK105 CH020BW-F CH C0H 2 p ±0.1pF 190 200 0.5±0.05 R UVK105 CH2R2JW-F CH C0H 2.2 p ±5％ 180 200 0.5±0.05 R UVK105 CH2R4JW-F CH C0H 2.4 p ±5％ 170 200 0.5±0.05 R UVK105 CH2R7JW-F CH C0H 2.7 p ±5％ 150 200 0.5±0.05 R UVK105 CH030JW-F CH C0H 3 p ±5％ 130 200 0.5±0.05 R UVK105 CH3R3JW-F CH C0H 3.3 p ±5％ 120 200 0.5±0.05 R UVK105 CH3R6JW-F CH C0H 3.6 p ±5％ 110 200 0.5±0.05 R UVK105 CH3R9JW-F CH C0H 3.9 p ±5％ 99 200 0.5±0.05 R UVK105 CH4R3JW-F CH C0H 4.3 p ±5％ 84 200 0.5±0.05 R UVK105 CH4R7JW-F CH C0H 4.7 p ±5％ 84 200 0.5±0.05 R UVK105 CH5R1JW-F CH C0H 5.1 p ±5％ 84 200 0.5±0.05 R Capacitance [F] Soldering R:Reflow W:Wave Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm]Part number 1 Part number 2 Part number 1 Rated voltage [V] Rated voltage [V] Capacitance [F] Q (at 1GHz) (min) Capacitance tolerance [％] Capacitance tolerance [％] Q (at 1GHz) (min) Capacitance tolerance [％] Temperature characteristics Soldering R:Reflow W:Wave Q (at 1GHz) (min) Soldering R:Reflow W:Wave Temperature characteristics Part number 2 Temperature characteristics Capacitance [F] Part number 2 Rated voltage [V]Part number 1 c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER Super Low Distortion Multilayer Ceramic Capacitors (CFCAPTM)

• 105TYPE 【Temperature Characteristic SD : Standard】 0.5mm thickness（V） HTLT Rated voltage x ％ UMK105 SD391KV-F 390 p ±10 0.1 200 0.5±0.05 R UMK105 SD471KV-F 470 p ±10 0.1 200 0.5±0.05 R UMK105 SD561KV-F 560 p ±10 0.1 200 0.5±0.05 R TMK105 SD681KV-F 680 p ±10 0.1 200 0.5±0.05 R TMK105 SD821KV-F 820 p ±10 0.1 200 0.5±0.05 R TMK105 SD102KV-F 1000 p ±10 0.1 200 0.5±0.05 R TMK105 SD122KV-F 1200 p ±10 0.1 200 0.5±0.05 R EMK105 SD152KV-F 1500 p ±10 0.1 200 0.5±0.05 R EMK105 SD182KV-F 1800 p ±10 0.1 200 0.5±0.05 R EMK105 SD222KV-F 2200 p ±10 0.1 200 0.5±0.05 R EMK105 SD272KV-F 2700 p ±10 0.1 200 0.5±0.05 R LMK105 SD332KV-F 3300 p ±10 0.1 200 0.5±0.05 R LMK105 SD392KV-F 3900 p ±10 0.1 200 0.5±0.05 R LMK105 SD472KV-F 4700 p ±10 0.1 200 0.5±0.05 R 【Temperature Characteristic SD : Standard】 0.3mm thickness（P） HTLT Rated voltage x ％ LMK105 SD152KP-F 10 1500 p ±10 0.1 200 0.3±0.03 R JMK105 SD272KP-F 6.3 2700 p ±10 0.1 200 0.3±0.03 R
• 107TYPE 【Temperature Characteristic SD : Standard】 0.8mm thickness（A） HTLT Rated voltage x ％ UMK107 SD102KA-T 1000 p ±10 0.1 200 0.8±0.10 R UMK107 SD122KA-T 1200 p ±10 0.1 200 0.8±0.10 R UMK107 SD152KA-T 1500 p ±10 0.1 200 0.8±0.10 R UMK107 SD182KA-T 1800 p ±10 0.1 200 0.8±0.10 R UMK107 SD222KA-T 2200 p ±10 0.1 200 0.8±0.10 R UMK107 SD272KA-T 2700 p ±10 0.1 200 0.8±0.10 R UMK107 SD332KA-T 3300 p ±10 0.1 200 0.8±0.10 R TMK107 SD392KA-T 3900 p ±10 0.1 200 0.8±0.10 R TMK107 SD472KA-T 4700 p ±10 0.1 200 0.8±0.10 R EMK107 SD562KA-T 5600 p ±10 0.1 200 0.8±0.10 R EMK107 SD682KA-T 6800 p ±10 0.1 200 0.8±0.10 R EMK107 SD822KA-T 8200 p ±10 0.1 200 0.8±0.10 R EMK107 SD103KA-T 10000 p ±10 0.1 200 0.8±0.10 R LMK107 SD123KA-T 12000 p ±10 0.1 200 0.8±0.10 R LMK107 SD153KA-T 15000 p ±10 0.1 200 0.8±0.10 R LMK107 SD183KA-T 18000 p ±10 0.1 200 0.8±0.10 R LMK107 SD223KA-T 22000 p ±10 0.1 200 0.8±0.10 R
• 212TYPE 【Temperature Characteristic SD : Standard】 1.25mm thickness（G） HTLT Rated voltage x ％ GMK212 SD183KG-T 18000 p ±10 0.1 200 1.25±0.10 R GMK212 SD223KG-T 22000 p ±10 0.1 200 1.25±0.10 R GMK212 SD273KG-T 27000 p ±10 0.1 200 1.25±0.10 R LMK212 SD683KG-T 68000 p ±10 0.1 200 1.25±0.10 R LMK212 SD823KG-T 82000 p ±10 0.1 200 1.25±0.10 R LMK212 SD104KG-T 0.1 μ ±10 0.1 200 1.25±0.10 R 【Temperature Characteristic SD : Standard】 0.85mm thickness（D） HTLT Rated voltage x ％ UMK212 SD392KD-T 3900 p ±10 0.1 200 0.85±0.10 R UMK212 SD472KD-T 4700 p ±10 0.1 200 0.85±0.10 R UMK212 SD562KD-T 5600 p ±10 0.1 200 0.85±0.10 R UMK212 SD682KD-T 6800 p ±10 0.1 200 0.85±0.10 R UMK212 SD822KD-T 8200 p ±10 0.1 200 0.85±0.10 R UMK212 SD103KD-T 10000 p ±10 0.1 200 0.85±0.10 R GMK212 SD123KD-T 12000 p ±10 0.1 200 0.85±0.10 R GMK212 SD153KD-T 15000 p ±10 0.1 200 0.85±0.10 R EMK212 SD333KD-T 16 33000 p ±10 0.1 200 0.85±0.10 R LMK212 SD473KD-T 10 47000 p ±10 0.1 200 0.85±0.10 R
• 316TYPE 【Temperature Characteristic SD : Standard】 1.6mm thickness（L） HTLT Rated voltage x ％ TMK316 SD823KL-T 82000 p ±10 0.1 200 1.6±0.20 R TMK316 SD104KL-T 0.1 μ ±10 0.1 200 1.6±0.20 R Rated voltage [V] Rated voltage [V] Part number 1 Part number 1 Part number 1 Part number 2 Rated voltage [V] Standard Type Capacitance [F] Temperature characteristics tanδ [％] Part number 1 Part number 2 Part number 2 Part number 1 Part number 1 Part number 2 Part number 2 Part number 2 Thickness*3 [mm] Thickness*3 [mm] Soldering R:Reflow W:Wave Standard Type Standard Type Standard Type Rated voltage [V] Temperature characteristics Capacitance tolerance [％] Thickness*3 [mm] Capacitance tolerance [％] Standard Type Temperature characteristics Capacitance [F] tanδ [％] Capacitance tolerance [％] Capacitance [F] tanδ [％] tanδ [％] Capacitance tolerance [％] tanδ [％] Capacitance tolerance [％] Capacitance [F] tanδ [％] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Rated voltage [V] Temperature characteristics Capacitance [F] Temperature characteristics Standard Type Standard Type Temperature characteristics Rated voltage [V] Thickness*3 [mm] Soldering R:Reflow W:Wave Thickness*3 [mm] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Thickness*3 [mm] Capacitance tolerance [％] Capacitance [F] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER 【Temperature Characteristic SD : Standard】 1.15mm thickness（F） HTLT Rated voltage x ％ GMK316 SD333KF-T 33000 p ±10 0.1 200 1.15±0.10 R GMK316 SD393KF-T 39000 p ±10 0.1 200 1.15±0.10 R TMK316 SD473KF-T 47000 p ±10 0.1 200 1.15±0.10 R TMK316 SD563KF-T 56000 p ±10 0.1 200 1.15±0.10 R TMK316 SD683KF-T 68000 p ±10 0.1 200 1.15±0.10 R Low Distortion High Value Multilayer Ceramic Capacitors(CF_LD)

• 107TYPE 【Temperature Characteristic LD : X5R】 0.8mm thickness（A） HTLT Rated voltage x ％ UMK107BLD224[]A-T 50 X5R 0.22 μ ±10，±20 10 150 0.8+0.20/-0 R TMK107BLD474[]A-T X5R 0.47 μ ±10，±20 10 150 0.8+0.20/-0 R TMK107BLD105[]A-T X5R 1 μ ±10，±20 10 150 0.8+0.20/-0 R
• 212TYPE 【Temperature Characteristic LD : X5R】 1.25mm thickness（G） HTLT Rated voltage x ％ GMK212 LD105[]G-T X5R 1 μ ±10，±20 10 150 1.25±0.10 R GMK212BLD225[]G-T X5R 2.2 μ ±10，±20 10 150 1.25+0.20/-0 R
• 316TYPE 【Temperature Characteristic LD : X5R】 1.6mm thickness（L） Rated voltage [V] HTLT Rated voltage x ％ UMK316 LD105[]L-T 50 X5R 1 μ ±10，±20 10 150 1.6±0.20 R GMK316BLD475[]L-T 35 X5R 4.7 μ ±10，±20 10 150 1.6±0.30 R TMK316BLD106[]L-T 25 X5R 10 μ ±10，±20 10 150 1.6±0.30 R
• 325TYPE 【Temperature Characteristic LD : X5R】 1.9mm thickness（N） HTLT Rated voltage x ％ UMK325 LD105[]N-T 50 X5R 1 μ ±10，±20 10 200 1.9±0.20 R 【Temperature Characteristic LD : X5R】 2.5mm thickness（M） HTLT Rated voltage x ％ UMK325 LD155[]M-T 50 X5R 1.5 μ ±10，±20 5 150 2.5±0.20 R Medium-High Voltage Multilayer Ceramic Capacitors
• 107TYPE 【Temperature Characteristic BJ : B/X5R】 0.8mm thickness（A） HTLT Rated voltage x ％ HMK107 BJ102[]A-T B X5R*1 1000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ152[]A-T B X5R*1 1500 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ222[]A-T B X5R*1 2200 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ332[]A-T B X5R*1 3300 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ472[]A-T B X5R*1 4700 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ682[]A-T B X5R*1 6800 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ103[]A-T B X5R*1 10000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ153[]A-T B X5R*1 15000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ223[]A-T B X5R*1 22000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ333[]A-T B X5R*1 33000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ473[]A-T B X5R*1 47000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 BJ104[]A-T B X5R*1 0.1 μ ±10，±20 3.5 200 0.8±0.10 R 【Temperature Characteristic B7 : X7R , C7 : X7S】 0.8mm thicknes s（A） HTLT Rated voltage x ％ HMK107 B7102[]A-T X7R 1000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 B7152[]A-T X7R 1500 p ±10，±20 3.5 200 0.8±0.10 R HMK107 B7222[]A-T X7R 2200 p ±10，±20 3.5 200 0.8±0.10 R HMK107 B7332[]A-T X7R 3300 p ±10，±20 3.5 200 0.8±0.10 R HMK107 B7472[]A-T X7R 4700 p ±10，±20 3.5 200 0.8±0.10 R HMK107 B7682[]A-T X7R 6800 p ±10，±20 3.5 200 0.8±0.10 R HMK107 B7103[]A-T X7R 10000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 B7153[]A-T X7R 15000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 B7223[]A-T X7R 22000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 B7333[]A-T X7R 33000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 B7473[]A-T X7R 47000 p ±10，±20 3.5 200 0.8±0.10 R HMK107 C7104[]A-T X7S 0.1 μ ±10，±20 3.5 200 0.8±0.10 R Thickness*3 [mm] Soldering R:Reflow W:Wave Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] Soldering R:Reflow W:Wave Capacitance tolerance [％] Temperature characteristics tanδ [％] Part number 2 Part number 2 Part number 2 Capacitance [F] Temperature characteristics tanδ [％] Temperature characteristics Capacitance tolerance [％] Temperature characteristics Capacitance [F] Part number 1 Part number 1 Part number 2 Part number 1 Part number 1 Part number 1 Part number 1 Part number 1 Part number 1 Rated voltage [V]Part number 2 Part number 2 Capacitance [F] Standard Type Temperature characteristics tanδ [％] Capacitance tolerance [％] Capacitance tolerance [％] tanδ [％] Capacitance tolerance [％] Capacitance tolerance [％] tanδ [％] tanδ [％] tanδ [％] Rated voltage [V] Temperature characteristics 100 Rated voltage [V] Rated voltage [V] Rated voltage [V] Rated voltage [V] Rated voltage [V]Part number 2 Soldering R:Reflow W:Wave Thickness [mm] Thickness*3 [mm] Thickness*3 [mm] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Capacitance [F] Capacitance [F] Capacitance [F] Temperature characteristics Capacitance tolerance [％] tanδ [％] Part number 2 Temperature characteristics Soldering R:Reflow W:Wave Capacitance tolerance [％] Capacitance [F] Capacitance [F] 100 c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER

• 212TYPE 【Temperature Characteristic BJ : B/X5R】 1.25mm thickness（G） HTLT Rated voltage x ％ HMK212 BJ103[]G-T B X5R*1 10000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 BJ153[]G-T B X5R*1 15000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 BJ223[]G-T B X5R*1 22000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 BJ333[]G-T B X5R*1 33000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 BJ473[]G-T B X5R*1 47000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 BJ683[]G-T B X5R*1 68000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 BJ104[]G-T B X5R*1 0.1 μ ±10，±20 3.5 200 1.25±0.10 R HMK212 BJ224[]G-T B X5R*1 0.22 μ ±10，±20 3.5 200 1.25±0.10 R QMK212 BJ472[]G-T B X5R*1 4700 p ±10，±20 2.5 150 1.25±0.10 R QMK212 BJ682[]G-T B X5R*1 6800 p ±10，±20 2.5 150 1.25±0.10 R QMK212 BJ103[]G-T B X5R*1 10000 p ±10，±20 2.5 150 1.25±0.10 R QMK212 BJ153[]G-T B X5R*1 15000 p ±10，±20 2.5 150 1.25±0.10 R QMK212 BJ223[]G-T B X5R*1 22000 p ±10，±20 2.5 150 1.25±0.10 R 【Temperature Characteristic BJ : B/X5R】 0.85mm thickness（D） HTLT Rated voltage x ％ QMK212 BJ102[]D-T B X5R*1 1000 p ±10，±20 2.5 150 0.85±0.10 R QMK212 BJ152[]D-T B X5R*1 1500 p ±10，±20 2.5 150 0.85±0.10 R QMK212 BJ222[]D-T B X5R*1 2200 p ±10，±20 2.5 150 0.85±0.10 R QMK212 BJ332[]D-T B X5R*1 3300 p ±10，±20 2.5 150 0.85±0.10 R 【Temperature Characteristic B7 : X7R】 1.25mm thickness（G） HTLT Rated voltage x ％ HMK212 B7103[]G-T X7R 10000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 B7153[]G-T X7R 15000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 B7223[]G-T X7R 22000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 B7333[]G-T X7R 33000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 B7473[]G-T X7R 47000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 B7683[]G-T X7R 68000 p ±10，±20 3.5 200 1.25±0.10 R HMK212 B7104[]G-T X7R 0.1 μ ±10，±20 3.5 200 1.25±0.10 R HMK212 B7224[]G-T X7R 0.22 μ ±10，±20 3.5 200 1.25±0.10 R QMK212 B7472[]G-T X7R 4700 p ±10，±20 2.5 150 1.25±0.10 R QMK212 B7682[]G-T X7R 6800 p ±10，±20 2.5 150 1.25±0.10 R QMK212 B7103[]G-T X7R 10000 p ±10，±20 2.5 150 1.25±0.10 R QMK212 B7153[]G-T X7R 15000 p ±10，±20 2.5 150 1.25±0.10 R QMK212 B7223[]G-T X7R 22000 p ±10，±20 2.5 150 1.25±0.10 R 【Temperature Characteristic B7 : X7R】 0.85mm thickness（D） HTLT Rated voltage x ％ QMK212 B7102[]D-T X7R 1000 p ±10，±20 2.5 150 0.85±0.10 R QMK212 B7152[]D-T X7R 1500 p ±10，±20 2.5 150 0.85±0.10 R QMK212 B7222[]D-T X7R 2200 p ±10，±20 2.5 150 0.85±0.10 R QMK212 B7332[]D-T X7R 3300 p ±10，±20 2.5 150 0.85±0.10 R
• 316TYPE 【Temperature Characteristic BJ : B/X5R】 1.6mm thickness（L） HTLT Rated voltage x ％ HMK316 BJ473[]L-T B X5R*1 47000 p ±10，±20 3.5 200 1.6±0.20 R HMK316 BJ683[]L-T B X5R*1 68000 p ±10，±20 3.5 200 1.6±0.20 R HMK316 BJ104[]L-T B X5R*1 0.1 μ ±10，±20 3.5 200 1.6±0.20 R HMK316 BJ154[]L-T B X5R*1 0.15 μ ±10，±20 3.5 200 1.6±0.20 R HMK316 BJ224[]L-T B X5R*1 0.22 μ ±10，±20 3.5 200 1.6±0.20 R HMK316 BJ334[]L-T B X5R*1 0.33 μ ±10，±20 3.5 200 1.6±0.20 R HMK316 BJ474[]L-T B X5R*1 0.47 μ ±10，±20 3.5 200 1.6±0.20 R HMK316 BJ105[]L-T B X5R*1 1 μ ±10，±20 3.5 200 1.6±0.20 R QMK316 BJ333[]L-T B X5R*1 33000 p ±10，±20 2.5 150 1.6±0.20 R QMK316 BJ473[]L-T B X5R*1 47000 p ±10，±20 2.5 150 1.6±0.20 R QMK316 BJ683[]L-T B X5R*1 68000 p ±10，±20 2.5 150 1.6±0.20 R QMK316 BJ104[]L-T B X5R*1 0.1 μ ±10，±20 2.5 150 1.6±0.20 R SMK316 BJ153[]L-T B X5R*1 15000 p ±10，±20 2.5 120 1.6±0.20 R SMK316 BJ223[]L-T B X5R*1 22000 p ±10，±20 2.5 120 1.6±0.20 R 【Temperature Characteristic BJ : B/X5R】 1.15mm thickness（F） HTLT Rated voltage x ％ SMK316 BJ102[]F-T B X5R*1 1000 p ±10，±20 2.5 120 1.15±0.10 R SMK316 BJ152[]F-T B X5R*1 1500 p ±10，±20 2.5 120 1.15±0.10 R SMK316 BJ222[]F-T B X5R*1 2200 p ±10，±20 2.5 120 1.15±0.10 R SMK316 BJ332[]F-T B X5R*1 3300 p ±10，±20 2.5 120 1.15±0.10 R SMK316 BJ472[]F-T B X5R*1 4700 p ±10，±20 2.5 120 1.15±0.10 R SMK316 BJ682[]F-T B X5R*1 6800 p ±10，±20 2.5 120 1.15±0.10 R SMK316 BJ103[]F-T B X5R*1 10000 p ±10，±20 2.5 120 1.15±0.10 R Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] Temperature characteristics 630 Rated voltage [V] Part number 1 Part number 2 250 Part number 1 630 Rated voltage [V] 100 Part number 1 Part number 2 Part number 2 Part number 1 Part number 1 Part number 1 Part number 2 Part number 2 Part number 2 250 Rated voltage [V] Rated voltage [V] 100 tanδ [％] Soldering R:Reflow W:Wave tanδ [％] Thickness [mm] Soldering R:Reflow W:Wave Capacitance [F] Capacitance [F] Temperature characteristics Capacitance [F] Capacitance [F] Temperature characteristics Temperature characteristics Temperature characteristics Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave tanδ [％] tanδ [％] Soldering R:Reflow W:Wave Thickness*3 [mm] Thickness*3 [mm] tanδ [％] Capacitance tolerance [％] tanδ [％] Soldering R:Reflow W:Wave Capacitance tolerance [％] Capacitance tolerance [％] Capacitance [F] Capacitance tolerance [％] Capacitance tolerance [％] Capacitance [F] Capacitance tolerance [％] Rated voltage [V] 250 Temperature characteristics Rated voltage [V] 250 250 100 c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER 【Temperature Characteristic B7 : X7R】 1.6mm thickness（L） HTLT Rated voltage x ％ HMK316 B7473[]L-T X7R 47000 p ±10，±20 3.5 200 1.6±0.20 R HMK316 B7683[]L-T X7R 68000 p ±10，±20 3.5 200 1.6±0.20 R HMK316 B7104[]L-T X7R 0.1 μ ±10，±20 3.5 200 1.6±0.20 R HMK316 B7154[]L-T X7R 0.15 μ ±10，±20 3.5 200 1.6±0.20 R HMK316 B7224[]L-T X7R 0.22 μ ±10，±20 3.5 200 1.6±0.20 R HMK316 B7334[]L-T X7R 0.33 μ ±10，±20 3.5 200 1.6±0.20 R HMK316 B7474[]L-T X7R 0.47 μ ±10，±20 3.5 200 1.6±0.20 R HMK316 B7105[]L-T X7R 1 μ ±10，±20 3.5 200 1.6±0.20 R QMK316 B7333[]L-T X7R 33000 p ±10，±20 2.5 150 1.6±0.20 R QMK316 B7473[]L-T X7R 47000 p ±10，±20 2.5 150 1.6±0.20 R QMK316 B7683[]L-T X7R 68000 p ±10，±20 2.5 150 1.6±0.20 R QMK316 B7104[]L-T X7R 0.1 μ ±10，±20 2.5 150 1.6±0.20 R SMK316 B7153[]L-T X7R 15000 p ±10，±20 2.5 120 1.6±0.20 R SMK316 B7223[]L-T X7R 22000 p ±10，±20 2.5 120 1.6±0.20 R 【Temperature Characteristic B7 : X7R】 1.15mm thickness（F） HTLT Rated voltage x ％ SMK316 B7102[]F-T X7R 1000 p ±10，±20 2.5 120 1.15±0.10 R SMK316 B7152[]F-T X7R 1500 p ±10，±20 2.5 120 1.15±0.10 R SMK316 B7222[]F-T X7R 2200 p ±10，±20 2.5 120 1.15±0.10 R SMK316 B7332[]F-T X7R 3300 p ±10，±20 2.5 120 1.15±0.10 R SMK316 B7472[]F-T X7R 4700 p ±10，±20 2.5 120 1.15±0.10 R SMK316 B7682[]F-T X7R 6800 p ±10，±20 2.5 120 1.15±0.10 R SMK316 B7103[]F-T X7R 10000 p ±10，±20 2.5 120 1.15±0.10 R

• 325TYPE 【Temperature Characteristic BJ : B/X5R】 2.5mm thickness（M） HTLT Rated voltage x ％ HMK325 BJ225[]M-T 100 B X5R*1 2.2 μ ±10，±20 3.5 200 2.5±0.20 R 【Temperature Characteristic BJ : B/X5R】 1.9mm thickness（N） HTLT Rated voltage x ％ HMK325 BJ154[]N-T B X5R*1 0.15 μ ±10，±20 3.5 200 1.9±0.20 R HMK325 BJ224[]N-T B X5R*1 0.22 μ ±10，±20 3.5 200 1.9±0.20 R HMK325 BJ334[]N-T B X5R*1 0.33 μ ±10，±20 3.5 200 1.9±0.20 R HMK325 BJ474[]N-T B X5R*1 0.47 μ ±10，±20 3.5 200 1.9±0.20 R HMK325 BJ684[]N-T B X5R*1 0.68 μ ±10，±20 3.5 200 1.9±0.20 R HMK325 BJ105[]N-T B X5R*1 1 μ ±10，±20 3.5 200 1.9±0.20 R QMK325 BJ473[]N-T B X5R*1 47000 p ±10，±20 2.5 150 1.9±0.20 R QMK325 BJ104[]N-T B X5R*1 0.1 μ ±10，±20 2.5 150 1.9±0.20 R QMK325 BJ154[]N-T B X5R*1 0.15 μ ±10，±20 2.5 150 1.9±0.20 R QMK325 BJ224[]N-T B X5R*1 0.22 μ ±10，±20 2.5 150 1.9±0.20 R SMK325 BJ223[]N-T B X5R*1 22000 p ±10，±20 2.5 120 1.9±0.20 R SMK325 BJ333[]N-T B X5R*1 33000 p ±10，±20 2.5 120 1.9±0.20 R SMK325 BJ473[]N-T B X5R*1 47000 p ±10，±20 2.5 120 1.9±0.20 R 【Temperature Characteristic BJ : B/X5R】 1.15mm thickness（F） HTLT Rated voltage x ％ HMK325 BJ104[]F-T 100 B X5R*1 0.1 μ ±10，±20 3.5 200 1.15±0.10 R 【Temperature Characteristic B7 : X7R】 2.5mm thickness（M） Rated voltage [V] HTLT Rated voltage x ％ HMK325 B7225[]M-T 100 X7R 2.2 μ ±10，±20 3.5 200 2.5±0.20 R 【Temperature Characteristic B7 : X7R】 1.9mm thickness（N） HTLT Rated voltage x ％ HMK325 B7154[]N-T X7R 0.15 μ ±10，±20 3.5 200 1.9±0.20 R HMK325 B7224[]N-T X7R 0.22 μ ±10，±20 3.5 200 1.9±0.20 R HMK325 B7334[]N-T X7R 0.33 μ ±10，±20 3.5 200 1.9±0.20 R HMK325 B7474[]N-T X7R 0.47 μ ±10，±20 3.5 200 1.9±0.20 R HMK325 B7684[]N-T X7R 0.68 μ ±10，±20 3.5 200 1.9±0.20 R HMK325 B7105[]N-T X7R 1 μ ±10，±20 3.5 200 1.9±0.20 R QMK325 B7473[]N-T X7R 47000 p ±10，±20 2.5 150 1.9±0.20 R QMK325 B7104[]N-T X7R 0.1 μ ±10，±20 2.5 150 1.9±0.20 R QMK325 B7154[]N-T X7R 0.15 μ ±10，±20 2.5 150 1.9±0.20 R QMK325 B7224[]N-T X7R 0.22 μ ±10，±20 2.5 150 1.9±0.20 R SMK325 B7223[]N-T X7R 22000 p ±10，±20 2.5 120 1.9±0.20 R SMK325 B7333[]N-T X7R 33000 p ±10，±20 2.5 120 1.9±0.20 R SMK325 B7473[]N-T X7R 47000 p ±10，±20 2.5 120 1.9±0.20 R 【Temperature Characteristic B7 : X7R】 1.15mm thickness（F） HTLT Rated voltage x ％ HMK325 B7104[]F-T 100 X7R 0.1 μ ±10，±20 3.5 200 1.15±0.10 R 630 250 tanδ [％] tanδ [％] Capacitance tolerance [％] Part number 1 Part number 1 Part number 2 Rated voltage [V] 100 Soldering R:Reflow W:Wave Thickness*3 [mm] Capacitance [F] Capacitance tolerance [％] tanδ [％] Soldering R:Reflow W:Wave Capacitance tolerance [％] Capacitance [F] Capacitance tolerance [％] Capacitance [F] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave tanδ [％] Temperature characteristics Temperature characteristics Rated voltage [V] 250 630 Rated voltage [V] Part number 2 Temperature characteristics Capacitance [F] Capacitance tolerance [％]Rated voltage [V] Temperature characteristics 630 Part number 1 Part number 2 Temperature characteristics Temperature characteristics 100 100 Part number 1 tanδ [％] Temperature characteristics Capacitance [F]Part number 1 Part number 2 Rated voltage [V] Part number 2 Capacitance tolerance [％] Capacitance [F] Part number 2 Capacitance [F] Temperature characteristicsPart number 1 Part number 2 Rated voltage [V] 250 630 Part number 1 Part number 2 Rated voltage [V]Part number 1 tanδ [％] Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] Soldering R:Reflow W:Wave Thickness*3 [mm] Capacitance [F] Soldering R:Reflow W:Wave tanδ [％] Thickness*3 [mm] Soldering R:Reflow W:Wave Capacitance tolerance [％] Capacitance tolerance [％] tanδ [％] Soldering R:Reflow W:Wave Thickness*3 [mm] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER

• 432TYPE 【Temperature Characteristic BJ : B/X5R】 2.5mm thickness（M） HTLT Rated voltage x ％ HMK432 BJ474[]M-T B X5R*1 0.47 μ ±10，±20 3.5 200 2.5±0.20 R HMK432 BJ105[]M-T B X5R*1 1 μ ±10，±20 3.5 200 2.5±0.20 R HMK432 BJ155[]M-T B X5R*1 1.5 μ ±10，±20 3.5 200 2.5±0.20 R HMK432 BJ225[]M-T B X5R*1 2.2 μ ±10，±20 3.5 200 2.5±0.20 R QMK432 BJ104[]M-T B X5R*1 0.1 μ ±10，±20 2.5 150 2.5±0.20 R QMK432 BJ224[]M-T B X5R*1 0.22 μ ±10，±20 2.5 150 2.5±0.20 R QMK432 BJ334[]M-T B X5R*1 0.33 μ ±10，±20 2.5 150 2.5±0.20 R QMK432 BJ474[]M-T B X5R*1 0.47 μ ±10，±20 2.5 150 2.5±0.20 R SMK432 BJ473[]M-T B X5R*1 47000 p ±10，±20 2.5 120 2.5±0.20 R SMK432 BJ683[]M-T B X5R*1 68000 p ±10，±20 2.5 120 2.5±0.20 R SMK432 BJ104[]M-T B X5R*1 0.1 μ ±10，±20 2.5 120 2.5±0.20 R 【Temperature Characteristic B7 : X7R】 2.5mm thickness（M） HTLT Rated voltage x ％ HMK432 B7474[]M-T X7R 0.47 μ ±10，±20 3.5 200 2.5±0.20 R HMK432 B7105[]M-T X7R 1 μ ±10，±20 3.5 200 2.5±0.20 R HMK432 B7155[]M-T X7R 1.5 μ ±10，±20 3.5 200 2.5±0.20 R HMK432 B7225[]M-T X7R 2.2 μ ±10，±20 3.5 200 2.5±0.20 R QMK432 B7104[]M-T X7R 0.1 μ ±10，±20 2.5 150 2.5±0.20 R QMK432 B7224[]M-T X7R 0.22 μ ±10，±20 2.5 150 2.5±0.20 R QMK432 B7334[]M-T X7R 0.33 μ ±10，±20 2.5 150 2.5±0.20 R QMK432 B7474[]M-T X7R 0.47 μ ±10，±20 2.5 150 2.5±0.20 R SMK432 B7473[]M-T X7R 47000 p ±10，±20 2.5 120 2.5±0.20 R SMK432 B7683[]M-T X7R 68000 p ±10，±20 2.5 120 2.5±0.20 R SMK432 B7104[]M-T X7R 0.1 μ ±10，±20 2.5 120 2.5±0.20 R LW Reversal Decoupling Capacitors (LWDCTM)
• 105TYPE 【Temperature Characteristic BJ : X5R】 0.3mm thickness（P） HTLT Rated voltage x ％ TWK105 BJ104MP-F 25 X5R 0.1 μ ±20 5 150 0.3±0.05 R EWK105 BJ224MP-F 16 X5R 0.22 μ ±20 10 150 0.3±0.05 R LWK105 BJ474MP-F 10 X5R 0.47 μ ±20 10 150 0.3±0.05 R JWK105 BJ104MP-F X5R*1 0.1 μ ±20 5 150 0.3±0.05 R JWK105 BJ474MP-F X5R*1 0.47 μ ±20 10 150 0.3±0.05 R JWK105 BJ105MP-F X5R 1 μ ±20 10 150 0.3±0.05 R JWK105 BJ225MP-F X5R 2.2 μ ±20 10 150 0.3±0.05 R AWK105 BJ224MP-F 4 X5R 0.22 μ ±20 10 150 0.3±0.05 R 【Temperature Characteristic C6 : X6S , C7 : X7S】 0.3mm thickness（P） HTLT Rated voltage x ％ EWK105 C6104MP-F 16 X6S 0.1 μ ±20 5 150 0.3±0.05 R LWK105 C7104MP-F X7S 0.1 μ ±20 5 150 0.3±0.05 R LWK105 C6224MP-F X6S 0.22 μ ±20 10 150 0.3±0.05 R JWK105 C7104MP-F X7S 0.1 μ ±20 5 150 0.3±0.05 R JWK105 C7224MP-F X7S 0.22 μ ±20 10 150 0.3±0.05 R JWK105 C6474MP-F X6S 0.47 μ ±20 10 150 0.3±0.05 R AWK105 C6224MP-F X6S 0.22 μ ±20 10 150 0.3±0.05 R AWK105 C6474MP-F X6S 0.47 μ ±20 10 150 0.3±0.05 R AWK105 C6105MP-F X6S 1 μ ±20 10 150 0.3±0.05 R AWK105 C6225MP-F X6S 2.2 μ ±20 10 150 0.3±0.05 R
• 107TYPE 【Temperature Characteristic BJ : X5R】 0.5mm thickness（V） HTLT Rated voltage x ％ TWK107 BJ104MV-T 25 X5R*1 0.1 μ ±20 5 150 0.5±0.05 R EWK107 BJ224MV-T X5R*1 0.22 μ ±20 5 150 0.5±0.05 R EWK107 BJ474MV-T X5R*1 0.47 μ ±20 5 150 0.5±0.05 R LWK107 BJ105MV-T X5R 1 μ ±20 10 150 0.5±0.05 R LWK107 BJ225MV-T X5R 2.2 μ ±20 10 150 0.5±0.05 R JWK107 BJ105MV-T X5R*1 1 μ ±20 10 150 0.5±0.05 R JWK107 BJ225MV-T X5R 2.2 μ ±20 10 150 0.5±0.05 R JWK107 BJ475MV-T X5R 4.7 μ ±20 10 150 0.5±0.05 R AWK107 BJ106MV-T 4 X5R 10 μ ±20 10 150 0.5±0.05 R 【Temperature Characteristic B7 : X7R , C6 : X6S , C7 : X7S】 0.5 mm thickness（V） HTLT Rated voltage x ％ TWK107 B7104MV-T 25 X7R 0.1 μ ±20 5 150 0.5±0.05 R EWK107 B7224MV-T X7R 0.22 μ ±20 5 150 0.5±0.05 R EWK107 B7474MV-T X7R 0.47 μ ±20 5 150 0.5±0.05 R JWK107 C7105MV-T 6.3 X7S 1 μ ±20 10 150 0.5±0.05 R AWK107 C7225MV-T X7S 2.2 μ ±20 10 150 0.5±0.05 R AWK107 C6475MV-T X6S 4.7 μ ±20 10 150 0.5±0.05 R PWK107 C6106MV-T 2.5 X6S 10 μ ±20 10 150 0.5±0.05 R 6.3 6.3 250 630 Rated voltage [V] 6.3 Capacitance tolerance [％] Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] Thickness*3 [mm] tanδ [％]Part number 1 Part number 1 Part number 2 Rated voltage [V] 100 Part number 1 Part number 2 630 tanδ [％] 100 250 Part number 2Part number 1 Rated voltage [V] tanδ [％] Capacitance [F] Soldering R:Reflow W:Wave Capacitance tolerance [％] Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Soldering R:Reflow W:Wave Part number 1 Part number 1 Part number 2 Thickness*3 [mm] Temperature characteristics Capacitance [F] Capacitance [F] Temperature characteristics Capacitance tolerance [％] Capacitance [F] Part number 2 Rated voltage [V] Part number 2 Rated voltage [V] Capacitance [F] Temperature characteristics Temperature characteristics Capacitance tolerance [％] tanδ [％] tanδ [％] Capacitance tolerance [％] Capacitance tolerance [％] tanδ [％] Capacitance [F] Temperature characteristics Temperature characteristics Rated voltage [V] c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . CERAMIC CAPACITORS ■PARTS NUMBER

• 212TYPE 【Temperature Characteristic BJ : X5R】 0.85mm thickness（D） HTLT Rated voltage x ％ TWK212 BJ475[]D-T 25 X5R 4.7 μ ±10，±20 10 150 0.85±0.10 R EWK212 BJ106MD-T 16 X5R 10 μ ±20 10 150 0.85±0.10 R LWK212 BJ475[]D-T X5R 4.7 μ ±10，±20 10 150 0.85±0.10 R LWK212 BJ106MD-T X5R 10 μ ±20 10 150 0.85±0.10 R JWK212 BJ226MD-T 6.3 X5R 22 μ ±20 10 150 0.85±0.10 R 【Temperature Characteristic B7 : X7R , C6 : X6S】 0.85mm thickne ss（D） HTLT Rated voltage x ％ TWK212 B7225[]D-T 25 X7R 2.2 μ ±10，±20 5 150 0.85±0.10 R EWK212 C6475[]D-T 16 X6S 4.7 μ ±10，±20 10 150 0.85±0.10 R LWK212 C6106MD-T 10 X6S 10 μ ±20 10 150 0.85±0.10 R AWK212 C6226MD-T 4 X6S 22 μ ±20 10 150 0.85±0.10 R Thickness*3 [mm] Thickness*3 [mm] Soldering R:Reflow W:Wave Capacitance [F] Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Part number 1 Part number 2 Rated voltage [V] Temperature characteristics Capacitance [F] tanδ [％] Capacitance tolerance [％] Capacitance tolerance [％] tanδ [％] Soldering R:Reflow W:Wave c_mlcc_e-E02R01

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_pack_e-E02R01 Multilayer Ceramic Capacitors ■PACKAGING ①Minimum Quantity

• Taped package Type(EIA) Thickness Standard quantity [pcs] mm code Paper tape Embossed tape □MK042(01005) 0.2 C, D － 40000 □VS042(01005) 0.2 C □MK063(0201) 0.3 P, T 15000 □WK105(0204) ※ 0.3 P 10000 □MK105(0402)

0.2 C 20000

0.3 P 15000

0.5 V 10000 □VK105(0402) ※ 0.5 W □MK107(0603) □WK107(0306) ※ □MR107(0603)

0.45 K 4000

0.5 V － 4000

0.8 A 4000 － □MK212(0805) □WK212(0508) ※ □MR212(0805) 0.45 K 0.85 D

125 G － 3000

□MK316(1206) □MR316(1206)

1.15 F － 3000 125 G

□MK325(1210) □MR325(1210) 0.85 D － 2000 1.15 F 1.9 N 2.0max. Y □MK432(1812) 2.5 M － 500 N o t e : ※ L W R e v e r s e t y p e . ②Taping material ※No bottom tape for pressed carrier tape

• Card board carrier tape Top tape Base tape Sprocket hole Bottom tape Chip cavity
• Embossed tape Top tape Base tape Sprocket hole Chip cavity Chip filled Chip

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_pack_e-E02R01 ③Representative taping dimensions

• Paper Tape（8mm wide）
• Pressed carrier tape（ 2mm pitch） Type(EIA) Chip Cavity Insertion Pitch Tape Thickness Ａ Ｂ Ｆ Ｔ T1 □MK063(0201) 0.37 0.67 2.0±0.05 0.45max. 0.42max. □WK105(0204) ※ Note *1 Thickness, C：0.2mm ,P：0.3mm. ※ LW Reverse type. Unit：m m
• Punched carrier tape （2mm pitch） Type(EIA) Chip Cavity Insertion Pitch Tape Thickness Ａ Ｂ Ｆ Ｔ □MK105 (0402) Unit：mm
• Punched carrier tape （4mm pitch） Type(EIA) Chip Cavity Insertion Pitch Tape Thickness Ａ Ｂ Ｆ Ｔ □MK107(0603) □WK107(0306) ※ □MR107(0603) 1.0 1.8 4.0±0.1 1.1max. □MK212(0805) □MK316(1206) 2.0 3.6 Note：Taping size might be different depending on the size of the product. ※ LW Reverse type. Unit：mm

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_pack_e-E02R01

• Embossed tape（4mm wide） Type(EIA) Chip Cavity Insertion Pitch Tape Thickness Ａ Ｂ Ｆ K T Unit：mm
• Embossed tape（8mm wide） Type(EIA) Chip Cavity Insertion Pitch Tape Thickness Ａ Ｂ Ｆ K T 4.0±0.1 1.3max. 0.25±0.1 □MK212(0805) □MR212(0805) 1.65 2.4 3.4max. 0.6max. □MK316(1206) □MR316(1206) 2.0 3.6 □MK325(1210) □MR325(1210) 2.8 3.6 Note： ※ LW Reverse type. Unit：mm
• Embossed tape（12mm wide） Type(EIA) Chip Cavity Insertion Pitch Tape Thickness Ａ Ｂ Ｆ K T Unit：mm

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_pack_e-E02R01 ④Trailer and Leader B l a n k p o r t i o n C h i p c a v i t y B l a n k p o r t i o n L e a d e r 160mm or more (6.3inches or more) Direction of tape feed 100mm or more (3.94inches or more) 400mm or more (15.7inches or more) ⑤Reel size E C D R B t A W A B C D E R T W 4mm wide tape 1.5max. 5±1.0 8mm wide tape 2.5max. 10±1.5 12mm wide tape 2.5max. 14±1.5 Unit：mm ⑥Top Tape Strength The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below. 0～20° Top tape Base tape Pull direction ⑦Bulk Cassette The exchange of individual specification is necessary. Please contact Taiyo Yuden sales channels. Shutter 36＋0/－0.2 12±0.1 Slider Connecting Port 110±0.7 31.5＋0.2/－0 36＋0/－0.2 12.0±0.1 8.8±0.1 6.8±0.1 Unit：mm

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E02R01 Super Low Distortion Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and High Reliability Application Multilayer Ceramic Capacitors are noted separately. Multilayer Ceramic Capacitors ■RELIABILITY DATA 1.Operating Temperature Range Specified Value Temperature Compensating（Class1） Standard －55 to ＋125℃ High Frequency Type High Permittivity （Class2） Specification Temperature Range BJ B －25 to ＋85℃ X5R －55 to ＋85℃ B7 X7R －55 to ＋125℃ C6 X6S －55 to ＋105℃ C7 X7S －55 to ＋125℃ LD(※) X5R －55 to ＋85℃ F F －25 to ＋85℃ Y5V －30 to ＋85℃ Note: ※LD Low distortion high value multilayer ceramic capacito r 2. Storage Conditions Specified Value Temperature Compensating（Class1） Standard －55 to ＋125℃ High Frequency Type High Permittivity （Class2） Specification Temperature Range BJ B －25 to ＋85℃ X5R －55 to ＋85℃ B7 X7R －55 to ＋125℃ C6 X6S －55 to ＋105℃ C7 X7S －55 to ＋125℃ LD(※) X5R －55 to ＋85℃ F F －25 to ＋85℃ Y5V －30 to ＋85℃ Note: ※LD Low distortion high value multilayer ceramic capacito r 3. Rated Voltage Specified Value Temperature Compensating（Class1） Standard 50VDC, 25VDC, 16VDC High Frequency Type 50VDC, 25VDC, 16VDC High Permittivity （Class2） 50VDC , 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC, 2.5VDC 4. Withstanding Voltage （Between terminals） Specified Value Temperature Compensating（Class1） Standard No breakdown or damage High Frequency Type High Permittivity （Class2） Test Methods and Remarks Class 1 Class 2 Applied voltage Rated voltage×3 Rated voltage×2.5 Duration 1 to 5 sec. Charge/discharge current 50mA max. 5. Insulation Resistance Specified Value Temperature Compensating（Class1） Standard 10000 MΩ min. High Frequency Type High Permittivity （Class2） Note 1 C≦0.047μF : 10000 MΩ min. C＞0.047μF : 500MΩ・μF Test Methods and Remarks Applied voltage : Rated voltage Duration : 60±5 sec. Charge/discharge current : 50mA max.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E02R01 6. Capacitance （Tolerance） Specified Value Temperature Compensating（Class1） Standard SL 0.2pF≦C≦5pF : ±0.25pF 0.2pF≦C≦10pF : ±0.5pF C＞10pF : ±5% or ±10% High Frequency Type CH 0.2pF≦C≦2pF : ±0.1pF C＞2pF : ±5% High Permittivity （Class2） F : ＋80/－20% Note: ※LD Low distortion high value multilayer ceramic capacito r Test Methods and Remarks Class 1 Class 2 Standard High Frequency Type C≦10μF C＞10μF Preconditioning None Thermal treatment （at 150℃ for 1hr） Note 2 Measuring frequency 1ＭHz±10% 1kHz±10% 120±10Hz Measuring voltage Note 0.5 to 5Vrms 1±0.2Vrms 0.5±0.1Vrms Bias application None 7. Q or Dissipation Factor Specified Value Temperature Compensating（Class1） Standard C＜30pF : Q≧400＋20C C≧30pF : Q≧1000 （ C ： N o m i n a l c a p a c i t ance） High Frequency Type Refer to detailed specification High Permittivity （Class2） Note 1 BJ, B7, C6, C7：2.5% max., F： 7% max. Test Methods and Remarks Class 1 Class 2 Standard High Frequency Type C≦10μF C＞10μF Preconditioning None Thermal treatment （at 150℃ for 1hr） Note 2 Measuring frequency 1ＭHz±10% 1GHz 1ｋHz±10% 120±10Hz Measuring voltage Note 1 0.5 t o 5Vrms 1±0.2Vrms 0.5±0.1Vrms Bias application None High Frequency Type Measuring equipment : HP4291A Measuring jig : HP16192A 8. Temperature Characteristic （Without voltage application） Specified Value Temperature Compensating（Class1） Standard Temperature Characteristic ［ppm/℃］ Tolerance ［ppm/℃］ C□ : 0 CG,CH, CJ, CK G : ±30 H : ±60 J : ±120 K : ±250 U□ : －750 UJ, UK SL : ＋350 to －1000 High Frequency Type Temperature Characteristic ［ppm/℃］ Tolerance ［ppm/℃］ C□ : 0 CH H : ±60 High Permittivity （Class2） Specification Capacitance change Reference temperature Temperature Range BJ B ±10% 20℃ －25 to ＋85℃ B7 X7R ±15% 25℃ －55 to ＋125℃ C6 X6S ±22% 25℃ －55 to ＋105℃ C7 X7S ±22% 25℃ －55 to ＋125℃ Note : ※LD Low distortion high value multilayer ceramic capaci tor Test Methods and Remarks Class 1 Capacitance at 20℃ and 85℃ shall be measured in thermal equilib rium, and the temperature characteristic shall be calculated fr om the following equation. C20×△T △T＝65 Class 2 Capacitance at each step shall be measured in thermal equilibri um, and the temperature characteristic shall be calculated from the following equation. Step B、F X5R、X7R、X6S、X7S、Y5V

1 Minimum operating temperature

2 20℃ 25℃

3 Maximum operating temperature

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E02R01 C ：Capacitance in Step 1 or Step 3 C2 ：Capacitance in Step 2 9. Deflection Specified Value Temperature Compensating（Class1） Standard Appearance : No abnormality Capacitance change : Within ±5% or ±0.5 pF, whichever is larger . High Frequency Type Appearance : No abnormality Capacitance change : Within±0.5 pF High Permittivity （Class2） Appearance : No abnormality Capacitance change : Within ±12.5%（BJ, B7, C6, C7,LD(※)） Within ±30%（F） Note: ※LD Low distortion high value multilayer ceramic capacito r Test Methods and Remarks Multilayer Ceramic Capacitors 042, 063, ※105 Type The other types Board Glass epoxy-resin substrate Thickness 0.8mm 1.6mm Warp 1mm Duration 10 sec. ※105 Type thickness, C： 0.2mm ,P： 0.3mm. Capacitance measurement shall be conducted with the board bent 10. Body Strength Specified Value Temperature Compensating（Class1） Standard － High Frequency Type No mechanical damage. High Permittivity （Class2） － Test Methods and Remarks High Frequency Type Applied force : 5N Duration : 10 sec. 11. Adhesive Strength of Terminal Electrodes Specified Value Temperature Compensating（Class1） Standard No terminal separation or its indication. High Frequency Type High Permittivity （Class2） Test Methods and Remarks Multilayer Ceramic Capacitors 042, 063 Type 105 Type or more Applied force 2N 5N Duration 30±5 sec. 12. Solderability Specified Value Temperature Compensating（Class1） Standard At least 95% of terminal electrode is covered by new solder. High Frequency Type High Permittivity （Class2） Test Methods and Remarks Eutectic solder Lead-free solder Solder type H60A or H63A Sn-3.0Ag-0.5Cu Solder temperature 230±5℃ 245±3℃ Duration 4±1 sec.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E02R01 13. Resistance to Soldering Specified Value Temperature Compensating（Class1） Standard Appearance : No abnormality Capacitance change : Within ±2. 5% or ±0.25pF, whichever is larger. Q : Initial value Insulation resistance : Initial value Withstanding voltage （between terminals） : No abnormality High Frequency Type Appearance : No abnormality Capacitance change : Within ±2.5% Q : Initial value Insulation resistance : Initial value Withstanding voltage （between terminals） : No abnormality High Permittivity （Class2） Note 1 Appearance : No abnormality Capacitance change : Within ± 7.5%（BJ, B7, C6, C7, LD(※)） Within ±20%（F） Dissipation factor : Initial value Insulation resistance : Initial value Withstanding voltage （between terminals）: No abnormality Note: ※LD Low distortion high value multilayer ceramic capacito r Test Methods and Remarks Class 1 042, 063 Type 105 Type Preconditioning None Preheating 150℃, 1 to 2 min. 80 to 100℃, 2 to 5 min. 150 to 200℃, 2 to 5 min. Solder temp. 270±5℃ Duration 3±0.5 sec. Recovery 6 to 24 hrs （Standard condition） Note 5 Class 2 042、063 Type 105, 107, 212 Type 316, 325 Type Preconditioning Thermal treatment （at 150℃ for 1 hr） Note 2 Preheating 150℃, 1 to 2 min. 80 to 100℃, 2 to 5 min. 150 to 200℃, 2 to 5 min. 80 to 100℃, 5 to 10 min. 150 to 200℃, 5 to 10 min. Solder temp. 270±5℃ Duration 3±0.5 sec. Recovery 24±2 hrs （Standard condition） Note 5 14. Temperature Cycle (Thermal Shock） Specified Value Temperature Compensating（Class1） Standard Appearance : No abnormality Capacitance change : Within ±2. 5% or ±0.25pF, whichever is larger. Q : Initial value Insulation resistance : Initial value Withstanding voltage （between terminals） : No abnormality High Frequency Type Appearance : No abnormality Capacitance change : Within ±0.25pF Q : Initial value Insulation resistance : Initial value Withstanding voltage （between terminals） : No abnormality High Permittivity （Class2） Note 1 Appearance : No abnormality Capacitance change : Within ±7. 5% （BJ, B7, C6, C7, LD(※)） Within ±20% （F） Dissipation factor : Initial value Insulation resistance : Initial value Withstanding voltage （between terminals） : No abnormality Note: ※LD Low distortion high value multilayer ceramic capacito r Test Methods and Remarks Class 1 Class 2 Preconditioning None Thermal treatment （at 150℃ for 1 hr） Note 2 1 cycle Step Temperature（℃） Time（min.）

1 Minimum operating temperature 30±3

2 Normal temperature 2 to 3

3 Maximum operating temperature 30±3

4 Normal temperature 2 to 3

Recovery 6 to 24 hrs （Standard condition） Note 5 24±2 hrs （Stan dard condition） Note 5

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E02R01 15. Humidity （Steady State） Specified Value Temperature Compensating（Class1） Standard Appearance : No abnormality Capacitance change : Within ±5% or ±0.5pF, whichever is larger. Q : C＜10pF : Q≧200＋10C C≧30pF:Q≧350（C：Nominal capacitance） Insulation resistance : 1000 MΩ min. High Frequency Type Appearance : No abnormality Capacitance change : Within ±0.5pF, Insulation resistance : 1000 MΩ min. High Permittivity （Class2） Note 1 Appearance : No abnormality Capacitance change : Within ±12.5% （BJ, B7, C6, C7, LD(※)） Within ±30% （F） Dissipation factor : 5.0% max.（BJ, B7, C6, C7, LD(※)） 11.0% max.（F） Insulation resistance : 50 MΩμF or 1000 MΩ whichever is smaller . Note: ※LD Low distortion high value multilayer ceramic capacito r Test Methods and Remarks Class 1 Class 2 Standard High Frequency Type All items Preconditioning None Thermal treatment（ at 150℃ for 1 hr） Note 2 Humidity 90 to 95%RH 90 to 95%RH Duration 500＋24/－0 hrs 500＋24/－0 hrs Recovery 6 to 24 hrs （Standard condition） Note 5 24±2 hrs （Stan dard condition） Note 5 16. Humidity Loading Specified Value Temperature Compensating（Class1） Standard Appearance : No abnormality Capacitance change : Within ±7. 5% or ±0.75pF, whichever is larger. Q : C＜30pF：Q≧100＋10C/3 C≧30pF：Q≧200 （C：Nominal capacitance） Insulation resistance : 500 MΩ min. High Frequency Type Appearance : No abnormality Capacitance change : C≦2pF：Within ±0.4 pF C＞2pF：Within ±0.75 pF （ C ： N o m i n a l c a p a c i t ance） Insulation resistance : 500 MΩ min. High Permittivity （Class2） Note 1 Appearance : No abnormality Capacitance change : Within ±12.5% （BJ, B7, C6, C7, LD(※)） Within ±30% （F） Dissipation factor : 5.0% ma x. （BJ, B7, C6, C7, LD(※)） 11.0% max. （F） Insulation resistance : 25 MΩμF or 500 MΩ, whichever is smaller . Note: ※LD Low distortion high value multilayer ceramic capacito r Test Methods and Remarks Class 1 Class 2 Standard High Frequency Type All items Preconditioning None Voltage treatment （Rated voltage are applied for 1 hour at 40℃） Note 3 Humidity 90 to 95%RH 90 to 95%RH Duration 500＋24/－0 hrs 500＋24/－0 hrs Applied voltage Rated voltage Rated voltage Charge/discharge current 50mA max. 50mA max. Recovery 6 to 24 hrs （Standard condition） Note 5 24±2 hrs（Stan dard condition） Note 5

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E02R01 17. High Temperature Loading Specified Value Temperature Compensating（Class1） Standard Appearance : No abnormality Capacitance change : Within ±3% or ±0.3pF, whichever is larger. Q : C＜10pF： Q≧200＋10C C≧30pF： Q≧350（C：Nominal capacitance） Insulation resistance : 1000 MΩ min. High Frequency Type Appearance : No abnormality Capacitance change : Within ±3% or ±0.3pF, whichever is larger. Insulation resistance : 1000 MΩ min. High Permittivity （Class2） Note 1 Appearance : No abnormality Capacitance change : Within ±12.5% （BJ, B7, C6, C7, LD(※)） Within ±30% （F） Dissipation factor : 5.0% max.（BJ, B7, C6, C7, LD(※)） 11.0% max.（F） Insulation resistance : 50 MΩμF or 1000 MΩ, whichever is smalle r. Note: ※LD Low distortion high value multilayer ceramic capacito r Test Methods and Remarks Class 1 Class 2 Standard High Frequency Type BJ, LD(※), F C6 B7, C7 Preconditioning None Voltage treatment（Twice the rated voltage shall be applied for 1 hour at 85℃, 105℃ or 125℃） Note 3, 4 Temperature Maximum operating temperature Maximum operating te mperature Duration 1000＋48/－0 hrs 1000＋48/－0 hrs Applied voltage Rated voltage×2 Rated voltage×2 Note 4 Charge/discharge current 50mA max. 50mA max. Recovery 6 to 24hr （Standard condition） Note 5 24±2 hrs （Stand ard condition） Note 5 Note: ※LD Low distortion high value multilayer ceramic capacito r Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail. Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kep t at room temperature for 24±2hours. Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and kept at room temperature for 24±2 hours. Note 4 150% of rated voltage is applicable to some items. Please refer to their specifications for further information. Note 5 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning m e a s u r e m e n t r e s u l t s , i n o r d e r t o p r o v i d e c o r r e l a t i o n d a ta, the test shall be conducted under the following condition. Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the "standard condition".

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_CFcap_reli_e-E02R01 Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and High Reliability Application Multilayer Ceramic Capacitors are noted separately. Super Low Distortion Multilayer Ceramic Capacitors （CFCAP TM） ■RELIABILITY DATA 1. Operating Temperature Range Specified Value －55 to ＋125℃ 2. Storage Temperature Range Specified Value －55 to ＋125℃ 3. Rated Voltage Specified Value 6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC 4. Dielectric Withstanding Voltage （Between terminals） Specified Value No breakdown or damage Test Methods and Remarks Applied voltage : Rated voltage×3 Duration : 1 to 5 sec. Charge/discharge current : 50mA max. ５．Insulation Resistance Specified Value 10000 MΩ or 500 MΩμF, whichever is smaller Test Methods and Remarks Applied voltage : Rated voltage Duration : 60±5 sec. Charge/discharge current : 50mA max. 6．Capacitance （Tolerance） Specified Value ±10％ Test Methods and Remarks Measuring frequency : 1kHz±10% Measuring voltage : 1±0.2Vrms Bias application : None ７．Dissipation Factor Specified Value 0.1%max Test Methods and Remarks Measuring frequency : 1kHz±10% Measuring voltage : 1±0.2Vrms Bias application : None 8．Bending Strength Specified Value Appearance : No abnormality Capacitance change : ±5% Test Methods and Remarks Warp : 1mm Speed : 0.5mm/second Duration : 10 seconds Test board : glass epoxy resin substrate Thickness : 1.6mm Capacitance measurement shall be conducted with the board bent. 9．Adhesive Force of Terminal Electrodes Specified Value Terminal electro des shall be no exfoliation or a sign of exfoliation. Test Methods and Remarks Applied force : 5N Duration : 30 ±5 seconds

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_CFcap_reli_e-E02R01 10．Solderability Specified Value At least 95% of t erminal electrode is covered by new solder. Test Methods and Remarks Eutectic solder Lead-free solder Solder type H60A or H63A Sn-3.0Ag-0.5Cu Solder temperature 230±5℃ 245±3℃ Duration 4±1 sec. 11．Resistance to Soldering Heat Specified Value Appearance : No abnormality Capacitance change : ±2.5% max. Dissipation factor : Initial value Insulation resistance : Initial value Withstanding voltage （between terminals） : No abnormality Test Methods and Remarks Solder temp. : 270 ±5℃ Duration : 3 ±0.5 sec. Preheating conditions : 80 to 100℃, 2 to 5 min. or 5 to 10 min . 150 to 200℃, 2 to 5 min. or 5 to 10 min. Measurement shall be conducted : 24±2hrs under the standard co ndition Note1 12．Temperature Cycle （Thermal Shock） Specified Value Appearance : No abnormality Capacitance change : ±2.5% max Dissipation factor : Initial value Insulation resistance : Initial value Withstanding voltage （between terminals）: No abnormality Test Methods and Remarks Conditions for 1 cycle Step temperature（℃） Time（min.） 1 Minimum operating temperature 30±3 min. 2 Normal temperature 2 to 3 min. 3 Maximum operating temperature 30±3 min. 4 Normal temperature 2 to 3 min. Number of cycles: 5 times Measurement shall be conducted : 24±2hrs under the standard condition Note1 13．Humidity （St eady state） Specified Value Appearance : No abnormality Capacitance change : ±5% max Dissipation factor : 0.5% max Insulation resistance : 50MΩμF or 1000MΩ, whichever is smaller Test Methods and Remarks Temperature : 40±2℃ Humidity : 90 to 95% RH Duration : 500 ＋24/－0 hrs Measurement shall be conducted : 24 ±2hrs under the standard c ondition Note1 14．Humidity Loading Specified Value Appearance : No abnormality Capacitance change : ±7.5% max Dissipation factor : 0.5% max Insulation resistance : 25MΩμF or 500MΩ, whichever is smaller Test Methods and Remarks According to JIS C 5102 clause 9.9. Temperature : 40±2℃ Humidity : 90 to 95% RH Duration : 500 ＋24/－0 hrs Applied voltage : Rated voltage Charge/discharge current : 50mA max Measurement shall be conducted : 24 ±2hrs under the standard c ondition Note1

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_CFcap_reli_e-E02R01 15．High Temperature Loading Specified Value Appearance : No abnormality Capacitance change : ±3% max Dissipation factor : 0.35% max Insulation resistance : 50MΩμF or 1000MΩ, whichever is smaller Test Methods and Remarks According to JIS C 5102 clause 9.10. Temperature : Maximum operating temperature Duration : 1000 ＋48/－0 hrs Applied voltage : Rated voltage x 2 Charge/discharge current : 50mA max Measurement shall be conducted : 24 ±2hrs under the standard co ndition Note1 Note1 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning measurement results, in ord er to provide correlation data, the test shall be conducted und er the following condition. Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the "standard condition".

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_mhv_reli_e-E02R01 Multilayer Ceramic Capacitors , Super Low Distortion Multilayer Ceramic Capacitors and High Reliability Application Multilayer Ceramic Capacitors are noted separately. Medium-High Voltage Multilayer Ceramic Capacitor ■RELIABILITY DATA 1. Operating Temperature Range Specified Value X7R, X7S : －55 to ＋125℃ X5R : －55 to ＋85℃ B : －25 to ＋85℃ 2. Storage Temperature Range Specified Value X7R, X7S : －55 to ＋125℃ X5R : －55 to ＋85℃ B : －25 to ＋85℃ 3. Rated Voltage Specified Value 100VDC(HMK), 250VDC(QMK), 630VDC(SMK) 4. Withstanding Voltage（Between terminals） Specified Value No breakdown or damage Test Methods and Remarks Applied voltage : Rated voltage ×2.5（HMK）, Rated voltage×2（QMK）, Rated voltage×1.2（SMK） Duration : 1 to 5sec. Charge/discharge current : 50mA max. 5. Insulation Resistance Specified Value 100MΩ・μF or 10GΩ, whichever is smaller. Test Methods and Remarks Applied voltage : Rated voltage（HMK, QMK）, 500V（SMK） Duration : 60±5sec. Charge/discharge current : 50mA max. 6. Capacitance （Tolerance） Specified Value ±10%, ±20% Test Methods and Remarks Measuring frequency : 1kHz±10% Measuring voltage : 1±0.2Vrms Bias application : None 7. Dissipation Factor Specified Value 3.5%max（HMK） 2.5%max（QMK, SMK） Test Methods and Remarks Measuring frequency : 1kHz±10% Measuring voltage : 1±0.2Vrms Bias application : None 8. Temperature Characteristic of Capacitance Specified Value Test Methods and Remarks Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation. Step B X5R、X7R、X7S 2 20℃ 25℃ C : Capacitance value in Step 1 or Step 3 C2 : Capacitance value in Step 2

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_mhv_reli_e-E02R01 9. Deflection Specified Value Appearance : No abnormality Capacitance change : Within±10% Test Methods and Remarks Warp : 1mm Duration : 10sec. Test board : Glass epoxy-resin substrate Thickness : 1.6mm Capacitance measurement shall be conducted with the board bent. 10. Adhesive Strength of Terminal Electrodes Specified Value No terminal sep aration or its indication. Test Methods and Remarks Applied force : 5N Duration : 30±5sec. 11. Solderability Specified Value At least 95% of t erminal electrode is covered by new solder Test Methods and Remarks Eutectic solder Lead-free solder Solder type H60A or H63A Sn-3.0Ag-0.5Cu Solder temperature 230±5℃ 245±3℃ Duration 4±1 sec. 12. Resistance to Soldering Specified Value Appearance : No abnormality Capacitance change : Within±15%（HMK）, ±10%（QMK, SMK） Dissipation factor : Initial value Insulation resistance : Initial value Withstanding voltage （between terminals） : No abnormality Test Methods and Remarks Preconditioning : Thermal treatment（at 150℃ for 1hr） Note1 Solder temperature : 270±5℃ Duration : 3±0.5sec. Preheating conditions : 80 to 100℃, 2 to 5 min. 150 to 200℃, 2 to 5min. Recovery : 24±2hrs under the standard condition Note3 13. Temperature Cycle （Thermal Shock） Specified Value Appearance : No abnormality Capacitance change : Within±15%（HMK）, ±7.5%（QMK, SMK） Dissipation factor : Initial value Insulation resistance : Initial value Test Methods and Remarks Preconditioning : Thermal treatment （at 150℃ for 1hr） Note1 Conditions for 1 cycle Step Temperature（℃） Time（min.） 1 Minimum operating temperature 30±3min. 2 Normal temperature 2 to 3min. 3 Maximum operating temperature 30±3min. 4 Normal temperature 2 to 3min. Number of cycles : 5 times Recovery : 24±2hrs under the standard condition Note3

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_mhv_reli_e-E02R01 14. Humidity （Steady state） Specified Value Appearance : No abnormality Capacitance change : Within±15% Dissipation factor : 7%max（HMK）, 5%max（QMK, SMK）. Insulation resistance : 25MΩμF or 1000MΩ, whichever is smaller . Test Methods and Remarks Preconditioning : Thermal treatment（at 150℃ for 1hr） Note1 Temperature : 40±2℃ Humidity : 90 to 95%RH Duration : 500 ＋24/－0 hrs Recovery : 24±2hrs under the standard condition Note3 15. Humidity Loading Specified Value Appearance : No abnormality Capacitance change : Within±15% Dissipation factor : 7%max（HMK）, 5%max（QMK, SMK）. Insulation resistance : 10MΩμF or 500MΩ, whichever is smaller. Test Methods and Remarks According to JIS 5102 clause 9.9. Preconditioning : Voltage treatment Note2 Temperature : 40±2℃ Humidity : 90 to 95%RH Applied voltage : Rated voltage Charge/discharge current : 50mA max. Duration : 500 ＋24/－0 hrs Recovery : 24±2hrs under the standard condition Note3 16. High Temperature Loading Specified Value Appearance : No abnormality Capacitance change : Within±15% Dissipation factor : 7%max（HMK）, 5%max（QMK, SMK）. Insulation resistance : 50MΩμF or 1000MΩ, whichever is smaller . Test Methods and Remarks According to JIS 5102 clause 9.10. Preconditioning : Voltage treatment Note2 Temperature : Maximum operating temperature Applied voltage : Rated voltage×2（HMK） Rated voltage×1.5（QMK） Rated voltage×1.2（SMK） Charge/discharge current : 50mA max. Duration : 1000 ＋24/－0 hrs Recovery : 24±2hrs under the standard condition Note3 Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for 24±2hours. Note2 Voltage treatment : Initial value shall be measured afte r test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and kept at room temperature for 24±2hours. Note3 Standard condition : Temperature: 5 to 35℃, Relative hum idity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning measurement results, in ord er to provide correlation data, the test shall be conducted under the following condition. Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the "standard condition".

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_prec_e-E02R01 High Reliability Application Multilayer Ceramic Capacitors are noted separately. Precautions on the use of Multilayer Ceramic Capacitors ■PRECAUTIONS 1. Circuit Design Precautions ◆Verification of operating environment, electrical rating and performance 1. A malfunction of equipment in fields such as medical, aerosp ace, nuclear control, etc. may cause serious harm to human life or have severe social ramifications. Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from them used in general purpose applications. ◆Operating Voltage （Verifi cation of Rated voltage） 1. The operating voltage for capacitors must always be their rated voltage or less. If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less. For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less. 2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC voltage or a pulse voltage having rapid rise time is used in a circuit. 2. PCB Design Precautions ◆Pattern configurations （D esign of Land-patterns） 1. When capacitors are mounted on PCBs, the amount of solder us ed （size of fillet） can directly affect the capacitor performan ce. Therefore, the following items must be carefully considered in the design of land patterns: （1）Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider appropriate land-patterns for proper amount of solder. （2）When more than one component are jointly soldered onto the s ame land, each component's soldering point shall be separated b y solder-resist. ◆Pattern configurations （Capacitor layout on PCBs） After capacitors are mounted on boards, they can be subjected t o mechanical stresses in subsequent manufacturing processes （PC B cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.）. For this reason, land pattern configurations and positions of capacitors shall be carefully considered to minimize stresses. Technical considerations ◆Pattern configurations （D esign of Land-patterns） The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts. （1）Recommended land dimensions for typical chip capacitors

• Multilayer Ceramic Capacitors : Recommended land dimensions （unit: mm） Wave-soldering Type 107 212 316 325 Size L 1.6 2.0 3.2 3.2 W 0.8 1.25 1.6 2.5 Land patterns for PCBs C B A B Chip capacitor Land pattern Solder-resist L W Chip capacitor Reflow-soldering Type 042 063 105 107 212 316 325 432 Note：Recommended land size might be different according to the allowance of the size of the product.
• LWDC: Recommended land dimensions for reflow-soldering （unit: mm） Type 105 107 212 Size L 0.52 0.8 1.25 W 1.0 1.6 2.0 L W LWDC

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_prec_e-E02R01 （2）Examples of good and bad solder application Item Not recommended Recommended Mixed mounting of SMD and leaded components Lead wire of component Solder-resist Component placement close to the chassis Chassis Solder (for grounding) Electrode pattern Solder-resist Hand-soldering of leaded components near mounted components Soldering iron Lead wire of component Solder-resist Horizontal component placement Solder-resist ◆Pattern configurations （Capacitor layout on PCBs） 1-1. The following is examples of good and bad capacitor layout s ; c a p a c i t o r s s h a l l b e l o c a t e d t o m i n i m i z e a n y p o s s i b l e m e c hanical stresses from board warp or deflection. Items Not recommended Recommended Deflection of board Place the product at a right angle to the direction of the anticipated mechanical stress. 1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below. E D C A B Slit Magnitude of stress A＞B＝C＞D＞E Perforation 1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB, split methods as well as chip location. 3. Mounting Precautions ◆Adjustment of mounting machine 1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them. 2. Maintenance and inspection of mounting machines shall be conducted periodically. ◆Selection of Adhesives 1. When chips are attached on PCBs with adhesives prior to sold ering, it may cause capacitor characteristics degradation unles s the following factors are appropriately checked : size of land patt erns, type of adhesive, amount applied, hardening temperature a nd hardening period. Therefore, please contact us for further information.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_prec_e-E02R01 Technical considerations ◆Adjustment of mounting machine 1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid this, the following points shall be considerable. （1）The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection. （2）The pressure of nozzle shall be adjusted between 1 and 3 N static loads. （3）To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins sh all be used on the other side of the PCB. The following diagrams show s o m e t y p i c a l e x a m p l e s o f g o o d a n d b a d p i c k - u p n o z z l e placement: Item Improper method Proper method Single-sided mounting chipping or cracking supporting pins or back-up pins Double-sided mounting chipping or cracking supporting pins or back-up pins 2. As the alignment pin is worn out, adjustment of the nozzle h eight can cause chipping or cracking of capacitors because of m echanical impact on the capacitors. To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of the pin shall be conducted periodically. ◆Selection of Adhesives Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect components. Therefore, the following precautions shall be noted in the application of adhesives. （1）Required adhesive characteristics a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process. b. The adhesive shall have sufficient strength at high temperatures. c. The adhesive shall have good coating and thickness consistency. d. The adhesive shall be used during its prescribed shelf life. e. The adhesive shall harden rapidly. f. The adhesive shall have corrosion resistance. g. The adhesive shall have excellent insulation characteristics. h. The adhesive shall have no emission of toxic gasses and no effect on the human body. （2）The recommended amount of adhesives is as follows; ［Recommended condition］ Figure 212/316 case sizes as examples a 0.3mm min b 100 to 120μm c Adhesives shall not contact land Amount adhesive aa b After capacitor are bonded c c 4. Soldering Precautions ◆Selection of Flux Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use; （1）Flux used shall be less than or equal to 0.1 wt%（ in Cl equi valent） of halogenated content. Flux having a strong acidity co ntent shall not be applied. （2）When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level. （3）When water-soluble flux is used, special care shall be taken to properly clean the boards. ◆Soldering Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions. Sn-Zn solder paste can adversely affect MLCC reliability. Please contact us prior to usage of Sn-Zn solder. Technical considerations ◆Selection of Flux 1-1. When too much halogenated substance（Chlorine, etc.） conten t is used to activate flux, or highly acidic flux is used, it m ay lead to corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors. 1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted and may adversely affect the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system. 1-3. Since the residue of water-soluble flux is easily dissolve d in moisture in the air, the residues on the surfaces of capac itors in high humidity conditions may cause a degradation of insulation resis tance and reliability of the capacitors. Therefore, the cleanin g methods and the capability of the machines used shall also be considered carefully when water-soluble flux is used.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_prec_e-E02R01 ◆Soldering ･ Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling. ･ Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive t hermal shock. ･ Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between the capacitors and solder shall be within 100 to 130℃. ･ Cooling : The temperature difference between the capacitors a nd cleaning process shall not be greater than 100℃. ［Reflow soldering］ 【Recommended conditions for eutectic soldering】 Preheating 230℃ Within 10sec. Slow cooling 60sec. Min. 60sec Min. 300 200 100 Temperature（℃） 【Recommended condition for Pb-free soldering】 Peak 260℃ Max. Within 10sec. Slow cooling Heating above 230℃ 40sec. Max. 300 200 100 Temperature（℃） Preheating150℃ 60sec. Min. Caution ①The ideal condition is to have solder mass（fillet）controlled t o 1/2 to 1/3 of the thickness of a capacitor. ②Because excessive dwell times can adversely affect solderability, soldering duration shall be kept as close to recommended times as possible. 1/2T～1/3T PC board Solder Capacitor T ［Wave soldering］ 【Recommended conditions for eutectic soldering】 230～250℃ Within 3sec. Slow cooling Preheating 120sec. Min. 300 200 100 Temperature（℃） 【Recommended condition for Pb-free soldering】 Peak 260℃ Max. Within 10sec. Slow cooling 120sec. Min. 300 200 100 Temperature（℃） Preheating 150℃ Caution ①Wave soldering must not be applied to capacitors designated as for reflow soldering only. ［Hand soldering］ 【Recommended conditions for eutectic soldering】 230～280℃ Within 3sec. Slow cooling Preheating 60sec. Min. 400 200 100 Temperature（℃） 300 【Recommended condition for Pb-free soldering】 Peak 350℃ Max. Within 3sec. Slow cooling 400 200 100 Temperature（℃） Preheating 150℃ Min. 60sec. Min. 300 316type or less ⊿T≦150℃ Peak 280℃ Max. Within 3sec. Slow cooling⊿T 400 200 100 温度（℃） Preheating 150℃ Min. 60sec. Min. 300 325type or more ⊿T≦130℃ Caution ①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm. ②The soldering iron shall not directly touch capacitors. 5. Cleaning Precautions ◆Cleaning conditions 1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use of the cleaning. （e.g. to remove soldering flux or other materi als from the production process.） 2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect capacitor's characteristics. Technical considerations 1. The use of inappropriate cleaning solutions can cause foreig n substances such as flux residue to adhere to capacitors or de teriorate their outer coating, resulting in a degradation of the capacitor's electrical properties （esp ecially insulation resistance）. 2. Inappropriate cleaning conditions（ insufficient or excessive cleaning） may adversely affect the performance of the cap acitors. In the case of ultrasonic cleaning, too much power output can c a u s e e x c e s s i v e v i b r a t i o n o f P C B s w h i c h m a y l e a d t o t he cracking of capacitors or the soldered portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall be carefully checked; U l t r a s o n i c o u t p u t : 2 0 W / ℓ o r l e s s U l t r a s o n i c f r e q u e n c y : 4 0 k H z o r l e s s Ultrasonic washing period : 5 min. or less

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_prec_e-E02R01 6. Resin coating and mold Precautions 1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal storage conditions resulting in the deterioration of the capacitor's performance. 2. When a resin's hardening temperature is higher than capacito r's operating temperature, the stresses generated by the excess ive heat may lead to damage or destruction of capacitors. The use of such resins, molding materials etc. is not recommended. 7. Handling Precautions ◆Splitting of PCB 1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board. 2. Board separation shall not be done manually, but by using the appropriate devices. ◆Mechanical considerations Be careful not to subject capacitors to excessive mechanical shocks. （1）If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used. （2）Please be careful that the mounted components do not come in c o n t a c t w i t h o r b u m p a g a i n s t o t h e r b o a r d s o r c o m p onents. 8. Storage conditions Precautions ◆Storage 1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control temperature and humidity in the storage area. Humidity should especially be kept as low as possible. ・Recommended conditions Ambient temperature : Below 30℃ H u m i d i t y : B e l o w 7 0 % R H The ambient temperature must be kept below 40℃. Even under idea l storage conditions, solderability of capacitor is deteriorated as time passes, so capacitors shall be used within 6 months from the time of delivery. ・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air. 2. The capacitance values of high dielectric constant capacitor s will gradually decrease with th e passage of time, so care shall be taken to design circuits . Even if capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at 150℃ for 1hour. Technical considerations If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and quality loss of taping/packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the above period, please check solderability before using the capacitors. ※RCR-2335B（Safety Application Guide for fixed ceramic capacitors for use in electronic equipment）is published by JEITA. Please check the guide regarding precautions for deflection te st, soldering by spot heat, and so on.