JW1969X JW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 11

Technical content

With Power Factor Correction Parameters Subject to Change Without Notice JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 1 Unauthorized Photocopy and Duplication Prohibited.

DESCRIPTION

The JW ®1969A/JW1969B/JW1969C/JW1969D/ JW1969E/JW1969BC/JW1969DC/JW1969EC (JW1969X series) is a constant current LED regulator which apply to single stage step-down power factor corrected LED drivers. JW1969X series integrates hi gh voltage power source, and can be supplied by line voltage directly, auxiliary winding and VCC capacitor are not needed. Patented current sensing and digital compensation technics ensure a unit power factor and high accuracy output current. The c ritical c onduction mode operation reduces the switching losses and increases the efficiency. JW1969X series has multi -protection functions which largely enhance the safety and reliability of the system, including LED open protection, LED short protection and over-temperature protection. Company’s Logo is Protected, “JW” and “JOULWATT” are R egistered Trademarks of JoulWatt technology Inc.

FEATURES

 No auxiliary winding and VCC capacitor  Supplied from line voltage directly  High current accuracy of line and load regulation  Internal compensation PFC technics  Harmonic current meets IEC61000-3-2  Critical conduction mode  High efficiency over wide operating range  High voltage power MOSFET integrated  LED open protection  LED short protection  Internal over-temperature protection  SOP7 and DIP7 packages

APPLICATIONS

Non-isolation Offline LED driver TYPICAL APPLICATION DRAINISPOVP VIN GND

JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 2 Unauthorized Photocopy and Duplication Prohibited. ORDER INFORMATION DEVICE1) PACKAGE TOP MARKING2) ENVIRONMENTAL3) JW1969ASOPA#TRPBF SOP7 JW1969A JW1969BSOPA#TRPBF SOP7 JW1969B JW1969CSOPA#TRPBF SOP7 JW1969C JW1969DSOPA#TRPBF SOP7 JW1969D JW1969ESOPA#TRPBF SOP7 JW1969E JW1969EDIPA#PBF DIP7 JW1969E JW1969BCSOPA#TR SOP7 JW1969BC JW1969DCSOPA#TR SOP7 JW1969DC JW1969ECSOPA#TR SOP7 JW1969EC Notes： Line2: Lot number Week code Year code Line1: Joulwatt LOGO JW # TRPBF PB Free(If PBF is not shown, it means PB free) Tape and Reel(If TR is not shown, it means tube) Package Code Part No. YWJW Product code DEVICE INFORMATION DEVICE BV MOS RDSON JW1969ASOPA#TRPBF 500V 8.5Ω JW1969BSOPA#TRPBF 550V 5.5Ω JW1969CSOPA#TRPBF 500V 3Ω JW1969DSOPA#TRPBF 550V 2.3Ω JW1969EDIPA#PBF 500V 1.5Ω JW1969BCSOPA#TR 500V 5.5Ω JW1969DCSOPA#TR 500V 2.3Ω JW1969ECSOPA#TR 500V 1.8Ω

JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 3 Unauthorized Photocopy and Duplication Prohibited. PIN CONFIGURATION TOP VIEW VIN OVP

7 ISPGND

5 DRAIN

ABSOLUTE MAXIMUM RATING1） RECOMMENDED OPERATING CONDITIONS THERMAL PERFORMANCE4） θJA θJC Note： 1) Exceeding these ratings may damage the device. These stress ratings do not imply function operation of the device at any other conditions beyond those indicated under RECOMMENDED OPERATING CONDITIONS. 2) The JW1969X includes thermal protection that is intended to protect the device in overload conditions. Continuous operation over the specified absolute maximum operating junction temperature may damage the device. 3) The device is not guaranteed to function outside of its operating conditions. 4) Measured on JESD51-7, 4-layer PCB.

JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 4 Unauthorized Photocopy and Duplication Prohibited.

ELECTRICAL CHARACTERISTICS

TA=25℃, unless otherwise stated. Item Symbol Condition Min. Typ. Max. Units POWER SUPPLY VIN Start-Up Voltage VIN_ST 12 V VIN Quiescent Current IINQ 200 250 μA CURRENT REGULATION ISP Sample Reference VREF 192 200 208 mV Minimum On Time of MOSFET5) TON_MIN 0.8 μS Maximum On Time of MOSFET TON_MAX 13 18 27 μS Minimum Off Time of MOSFET5) TOFF_MIN 0.9 μS Maximum Off Time of MOSFET5) TOFF_MAX 470 μS Maximum Switch Frequency5) fMAX 120 KHz Switching Period of VINL5) TVINL 60 μS PROTECTION ISP Over Voltage Protection Threshold VISP_MAX 1.08 1.2 1.32 V Vo Over Voltage Protection Threshold5) VO_OVP1 VOVP=0V 80 90 100 V VO_OVP2 VOVP=4.8V 105 117 129 VO_OVP3 VOVP=2V 162 180 198 VO_OVP4 VOVP=0.5V 214 237 260 Thermal Protection Threshold5) TOTP 140 150 ℃ MOS MOS Rdson5) JW1969A Rdson Vgs=10V 8.5 Ω JW1969B/BC 5.5 JW1969C 3 JW1969D/DC 2.3 JW1969EC 1.8 JW1969E 1.5 MOS Saturation Current5) JW1969A Id 1.6 A JW1969B/BC 2 JW1969C/D/DC/EC 6 JW1969E 10 Breakdown Voltage JW1969B/D BV 550 V JW1969A/C/E/BC/DC/EC 500 5) Guaranteed by design

JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 5 Unauthorized Photocopy and Duplication Prohibited. PIN DESCRIPTION Pin No. Name Description SOP7 DIP7 1 1 GND Chip ground. 2 2 OVP Set OVP threshold. 3 3 NC No connection. 4 4 VIN Line voltage input. 5,6 5,6 DRAIN DRAIN of the MOSFET. 7 7 ISP Output current sense. BLOCK DIAGRAM ISP GND Power Supply UVLO Current Sense & Limit Gate DriverPFC Latch off or Restart Timer Current Control DRAIN OVP VIN VREF OVP

JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 6 Unauthorized Photocopy and Duplication Prohibited. FUNCTIONAL DESCRIPTION The JW1969X series is a constant current LED driver which applies to non -isolation step-down LED system with power factor correction . JW1969X series can achieve excellent line and load regulation, high efficiency and low system cost with few peripheral components. Start Up JW1969X series is supplied by line voltage directly. When VIN reaches VIN start up voltage (VIN_ST), the chip begins to switch. Once VIN is lower than VIN under voltage lockout, JW1969X series stops switching. Constant Current Control The JW1969X series controls the output current from the information of the sensing resistor voltage. The output LED mean current can be calculated as: ILED = VREF / RSNS Where VREF – ISP sample reference; RSNS – The sensing resistor connected between ISP and GND. Critical Conduction Mode Operation JW1969X series works in the Critical conduction mode of the inductor current. When the power MOSFET is turn ed on, the inductor current begins to increase from zero. The turn on time of the MOSFET can be calculated as: TON = IPK× L / (VIN – VOUT) Where, L –inductance. IPK – peak current in one switch cycle. VIN – input voltage after rectification and filtering. VOUT – output LED voltage. When the power MOSFET is turn ed off, the inductor current begins to decrease. The power MOSFET turns on again when the inductor current is zero. The turn off time of the MOSFET can be calculated as: TOFF = IPK× L / VOUT And the inductance of the system can be calculated as: L = VOUT× (VIN – VOUT) / (f×IPK×VIN) Where, f is the switching frequency of the step-down system. LED Over Temperature Protection When internal temperature of the chip exceeds the Thermal Protection Threshold (TOTP), JW1969X series decreases LED current to help the chip cooling. LED Open Protection The OVP threshold (V O_OVP) is set by the OVP pin. When Vo is higher than V O_OVP, LED open protection is triggered and the chip stops switching for 800ms. The following table shows the VO_OVP design guide: OVP Pin VO_OVP(V) Short connected VO_OVP1 Not connected VO_OVP2 Connected with 510KΩ resistor VO_OVP3 Connected with 120KΩ resistor VO_OVP4

JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 7 Unauthorized Photocopy and Duplication Prohibited. APPLICATION NOTES 1: RVIN and VO_OVP design guide To enhance the surge capability, VIN pin of JW1969X series should be connected to input capacitor by a resistor RVIN( 0805/1206 package, no less than 4.7K Ω is recommended). Larger RVIN means better surge capability but please note that too large R VIN may decrease the drive current, and the maximum RVIN is limited by (Vo-15V)/RVIN>3mA DRAINISPOVP VIN GND RVIN RVIN and VO_OVP design guide is shown in following Tab: VO_PEAK(V) Recommended RVIN (Ω) OVP(V) 30~45 5.1K VO_OVP1 46~72 10K 73~97 10K~15K VO_OVP2 98~145 10K~20K VO_OVP3 146~190 20K ~51K VO_OVP4 Where VO_PEAK is the peak value of the Vo, the ripple of the Vo and suitable margin should be taken into consideration when designing the OVP. 2：PCB Design When designing the PCB of the JW1969X series system, please follow the directions: 1. Make the area of the power loop as small as possible in order to reduce the EMI radiation. 2. The chip should be far away from the heating element, such as the power inductor and the freewheel diode.

JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 8 Unauthorized Photocopy and Duplication Prohibited. REFERENCE DESIGN This reference design is suitable for 7 ~ 12W non-isolated Step-down LED driver, using JW1969B, with high efficiency, excellent line regulation. Reference ： VIN: 90VAC~264VAC VOUT: 40~75V IOUT: 150mA PF: >0.9 HD06 3mH(8*10) N 1.2mH D1 ES1J 90~264Vac VR1 320VAC GND 0.15uF/400V 0.1uF/275VAC 47uF/100V 10K/5%/0805 LED+ LED- 3.9K/1%/0805 100K/5%/1206 R4 NC C1 NC RS1 3R9/1%/1206 RS2 2R/1%/1206 Y1 NC GND LED+ LED-ISP NC 3DRAIN6 ISP DRAIN5 GND VIN4 OVP GND L

JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 9 Unauthorized Photocopy and Duplication Prohibited. PACKAGE OUTLINE SOP7 UNIT: mm L θ b e D A 2 A A 1 EE 1 c MILLIMETER MIN NOM MAX A — __ 1.75 A1 0.05 0.25 A2 1.25 1.65 b 0.32 0.52 c 0.30 D 4.50 5.00 5.50 E 5.50 6.00 6.50 E1 3.50 3.90 4.30 e L 0.40 1.27— 0.15 1.40 1.27TYP θ 0° — 8° 0.25 0.10 0.20 0.42 Symbol

JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 10 Unauthorized Photocopy and Duplication Prohibited. DIP7 UNIT: mm SYMBOL MILLIMETER MIN NOM MAX A 4.313.71 A2 3.15 3.60 b 0.38 0.57 c 0.20 0.25 0.36 E E1 7.32 7.62 7.92 e 2.54BSC E2 8.00 __ 9.02 L 3.00 D 9.00 9.20 9.40 1.47 1.52 1.57 6.10 6.60 A2 A B1 e L b E D 0.46 1 4 567 c 3.30 3.60

JW1969A/JW1969B/JW1969C/JW1969D/JW1969E/JW1969BC/JW1969DC/JW1969EC Rev0.23 JoulWatt® Proprietary Information. Patent Protected. 11 Unauthorized Photocopy and Duplication Prohibited. IMPORTANT NOTICE  Joulwatt Technology Inc . reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein.  Any unauthorized redistribution or copy of this document for any purpose is strictly forbidden.  Joulwatt Technology Inc. does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Copyright © 2019 JW1969X series Incorporated. All rights are reserved by Joulwatt Technology Inc.