LTV-352T TENAND | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only

FEATURES

  • High current transfer ratio ( CTR : MIN. 1000% at I F 1mA, V CE 2V ) * High input-output isolation voltage ( V iso 3,750Vrms ) * High collector-emitter voltage ( V CEO 300V ) * Mini-flat package : 2.0mm profile : LTV-352T * Safety approval UL, CSA, FIMKO NEMKO, DEMKO, SEMKO, VDE* approved (*Requires “V” ordering option) * RoHS compliance

APPLICATIONS

  • Hybrid substrates that require high density mounting. * Telephone sets * Copiers, facsimiles * Interfaces with various power supply circuits, power distribution boards. Part No. : LTV-352T Page : of BNS-OD-C131/A4 May.2009 http://www.tenand.com 深圳市腾恩科技有限公司 SHENZHEN TENAND TECHNOLOGY CO.,LTD

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV-352T : *1. 2-digit date code. *2. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). *3. Rank shall be or shall not be marked. *4. VDE 0884 Identification. Part No. : LTV-352T Page : 2 of 10 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only TAPING DIMENSIONS Description Symbol Dimensions in mm ( inches ) Tape wide W 12 ± 0.3 ( .47 ) Pitch of sprocket holes P 0 4 ± 0.1 ( .15 ) Distance of compartment F 5.5 ± 0.1 ( .217 ) 2 ± 0.1 ( .079 ) Distance of compartment to compartment P 1 8 ± 0.1 ( .315 ) Part No. : LTV-352T Page : 3 of 10 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25 °C ) PARAMETER SYMBOL RATING UNIT Forward Current I F 50 mA Reverse Voltage V R 6 V INPUT Power Dissipation P 70 mW Collector - Emitter Voltage V CEO 300 V Emitter - Collector Voltage V ECO 0.1 V Collector Current I C 150 mA OUTPUT Collector Power Dissipation P C 150 mW Total Power Dissipation P tot 170 mW *1 Isolation Voltage V iso 3,750 Vrms Operating Temperature T opr -55 ~ +110 °C Storage Temperature T stg -55 ~ +150 °C *2 Soldering Temperature T sol 260 °C *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV-352T Page : 4 of 10 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25 °C ) PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS Forward Voltage V F — 1.2 1.4 V I F=10mA Reverse Current I R — — 10 µA V R =4V INPUT Terminal Capacitance C t — 30 250 pF V=0, f=1KHz Collector Dark Current I CEO — — 200 nA V CE =200V, I F=0 Collector-Emitter Breakdown Voltage BV CEO 300 — — V IC =0.1mA IF=0 OUTPUT Emitter-Collector Breakdown Voltage BV ECO 0.1 — — V IE=10 µA IF=0 Collector Current I C 10 — — mA *1 Current Transfer Ratio CTR 1,000 — — % IF=1mA V CE =2V Collector-Emitter Saturation Voltage V CE(sat) — — 1.2 V IF=20mA IC =100mA Isolation Resistance R iso 5×10 10 1×10 11 — Ω DC500V 40 ~ 60% R.H. Floating Capacitance C f — 0.6 1 pF V=0, f=1MHz Cut-Off Frequency f c 1 7 — kHz V CE =2V, I C =20mA R L=100 Ω , -3dB Response Time (Rise) t r — 100 300 µs TRANSFER CHARACTERISTICS Response Time (Fall) t f — 20 100 µs V CC =2V, I C =20mA R L=100 Ω *1 CTR I I 100% C F = × Part No. : LTV-352T Page : 5 of 10 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Fig.2 Collector Power Diss ipation vs. Ambient Temperature Fig.4 Forward Current vs. Forward Collector-emitter Voltage Fig.6 Collector Current vs. Current Fig.5 Current Transfer Ratio vs. Forward Fig.3 Collector-emitter saturation Voltage vs. Forward current Collector power dissipation Pc (mW) Current transfer ratio CTR (%) Collector current Ic (mA) Forward current (mA) Collector-emitter voltage V (V) Ambient temperature Ta ( C) Ambient temperature Ta ( C) 100 150 200 0.1 Ambient Temperature o o Voltage 10mA 1.5mA 1mA VCE = 2V 1000 2000 3000 5000 Ic= 5mA 10mA 30mA 50mA 70mA 2 4 5 31 4000 3mA I F= 0.5mA 100 1.5mA CE 7000 6000 1 2 3 4 5 2mA 2.5mA 0.5 1.5 2.5 4.5 3.5 100mA PC (MAX.) 5mA Forward current (mA) 0.5 100 1.9 1.3 Forward voltage (V) 60 C 100 C 80 C o o o o 40 C o 20 C Forward current I F(mA) Forward current I F(mA) Collector-emitter saturation voltage VCE (sat) (V) 0 50 25 75 100 125 -55 -55 125 25 0 50 75 100 110 C o Part No. : LTV-352T Page : 6 of 10 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature Fig.8 Collector-emitter Saturation Voltage Fig.9 Collector Dark Current vs. Temperature Fig.10 Response Time vs. Load CE vs. Ambient Temperature 10 1 Collector-emitter saturation voltage V (sat) (V) Ambient temperature Ta ( C) 10.1 1000 O Resistance Voltage gain Av (dB) -25 Frequency f (kHz) 500 Fig.11 Frequency Response -10 -15 -20 100 10 10.1 VCE = 2V IC= 20mA Ta= 25 C RL= 1k 100 10 100 200

500 Response time ( s)

Load resistance R L (k ) VCE = 2V IC= 20mA Ta= 25 C Test Circuit for Response Time Test Circuit for Frequency Response Input Output Input Output Vcc td tr tf ts 90% 10% Output Vcc Ambient temperature Ta ( C) O Collector dark current I CEO (nA) tr tf td ts RD RL RLRD O O Ambient temperature Ta ( C) Relative current transfer ratio (%) 100 1.0 O 80 60 40 20 0.8 0.6 0.4 0.2 IF= 1mA VCE = 2V 1.2 120 20 1.0 100 40 60 80 0.8 0.6 0.4 0.2 1.2 IF= 20mA IC= 100mA 120 100 80 60 40 20 1 1000 100 VCE = 200V 10000 120 Part No. : LTV-352T Page : 7 of 10 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Temperature Profile of Soldering Reflow (1) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Part No. : LTV-352T Page : 8 of 10 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Temperature Profile of Soldering Reflow (2) When using another soldering method such as infrated ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of above (1) RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV-352T Page : 9 of 10 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Notes: - Lite-On is continually improving the quality, reliability, function or design and Lite-On reserves the right to make changes without further notices. - The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. - For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. - When requiring a device for any ”specific” application, please contact our sales in advice. - If there are any questions about the contents of this publication, please contact us at your convenience. - The contents described herein are subject to change without prior notice. - Do not immerse unit’s body in solder paste. Part No. : LTV-352T Page : 10 of 10 BNS-OD-C131/A4