LTM06C310

LTM06C310 TOSHIBA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

LIQUID CRYSTAL DISPLAY DIVISION PRODUCT INFORMATION

FEATURES

(1) A high-resolution of 202 pixels per inch - equivalent to printed materials. (2) XGA resolution – expanding applications in such areas as electronic books and personal digital-picture viewers. (3) 6.3-inch display – simillar in size to a typical photograph or a paperback book. MECHANICAL SPECIFICATIONS Item Specifications Dimensional Outline (Typ.) 151.9( W) x 115.8(H) x 7.9max(D) mm Number of Pixels 1024( W) x 768(H) pixels Active Area 129.024( W) x 96.768(H) mm Pixel Pitch 0.126( W) x 0.126(H) Weight (approximately) 130g Backlight Single CCFL, Sidelight type ABSOLUTE MAXIMUM RATINGS Item Min. Max. Unit (VDD) -0.3 4.0 VSupply Voltage (VFL) 0 2.0 kV(rms) FL Driving Frequency ( fFL) - 100 kHz Input Signal Voltage ( VIN) -0.3 VDD+0.3 V Operating Temperature 0 50 °C Storage Temperature -20 60 °C Storage Humidity 10 90 %(RH) ELECTRICAL SPECIFICATION Item Min. Typ. Max. Unit Remarks (VDD) 3.0 3.3 3.6 VSupply Voltage (VFL) (390) (440) (490) V(rms) IFL=2.8 mA(rms) FL Start Voltage (Ta=0°C) (1000) --- (1400) V(rms) Receiver Input Voltage 0 --- 2.4 V Differential Input High Threshold(VTH)*1 --- --- VOS+0.1 V Differential Input Low Threshold(VTL)*1 VOS-0.1 --- --- V VOS:Offset Mode Voltage VOS=1.2V *2 (IDD) --- (270) --- MACurrent Consumption *2 *3 Power Consumption --- (2.1) --- W @70cd/m 2 *1 : Refer to DF90CF364 Specification by National Semiconductor Corporation. This LCD module conforms to LVDS standard (TIA/EIA-644) *2 : 8 color bars pattern *3 : Excepting the efficiency FL inverter * 4 : not use Hsync nor Vsync. Only ENAB control. OPTICAL SPECIFICATION (Ta=25°C) Item Min. Typ. Max. Unit Remarks Contrast Ratio ( CR) 100 250 --- --- (tON) --- --- 50 msResponse Time (tOFF) --- --- 50 ms (50) (70) --- cd/m 2 IFL=2.8mA(rms)Luminance ( L) --- (150) --- cd/m 2 IFL=6mA(rms) *The information contained herein is presented only as a guide for the applications of our products. No responsibility is assum ed by Toshiba or other rights of the third parties which may result from its use. No license is granted by implication or otherwise u nder any patent or patent rights of Toshiba or others. *The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba before proceeding with the design of equipment incorporating this product. 16cm COLOUR TFT-LCD MODULE (6.3 TYPE) LTM06C310 (p-Si TFT) TENTATIVE

1, 1 2, 1 X2 n-1, 1 X2 n, 1 1024, 1 1, 2 1, Y X 2n-1, Y X 2n, Y 1, 768 1024,768 CN2 LVDS DC/DC Converter Panel Controller Gray scale Manipulation Voltage Generation Circuit Y-driver Liquid Crystal Panel 1024 x 768 pixels X-driver Backlight 1024 pixels 768 pixels D/A Converter Circuit CN1 FPC I/F PCB

CONNECTOR PIN ASSIGNMENT FOR INTERFACE CN1 INPUT SIGNAL Connector : SL00-20L2 / KEL CORP . Mating Connector : SL20-20S / KEL CORP . Terminal No. Symbol Function 1 VDD Power Supply : +3.3V 2 VDD Power Supply : +3.3V 3 VDD Power Supply : +3.3V 4 VDD Power Supply : +3.3V

5 GND

6 GND

7 GND

8 CK+ Sampling Clock (Positive : + )

9 CK- Sampling Clock (Negative : - )

10 GND

11 IN2+ Transmission Data of Pixels 2 (Positive : + )

12 IN2- Transmission Data of Pixels 2 (Negative : - )

13 GND

14 IN1+ Transmission Data of Pixels 1 (Positive : + )

15 IN1- Transmission Data of Pixels 1 (Negative : - )

16 GND

17 IN0+ Transmission Data of Pixels 0 (Positive : + )

18 IN0- Transmission Data of Pixels 0 (Negative : - )

19 GND

20 GND

Connector : BHSR-02VS-1 / JAPAN SOLDERLESS TERMINAL MFG CO.,LTD. Mating Connector : SM02B-BHSS-1 / JAPAN SOLDERLESS TERMINAL MFG CO.,LTD. Terminal No. Symbol Function

1 VFLH CCFL Power Supply ( high voltage)

2 VFLL CCFL Power Supply (low voltage)

RECOMMENDED TRANSMITTER (DS90CF363) TO LTM06C310 INTERFACE ASSIGNMENT Case1: 6bit Transmitter DS90CF363 Input Terminal No. Input Signal (Graphics controller output signal) LTM06C310 Interface (CN1) Symbol DS90CF363 Symbol Function Output Signal Symbol Terminal Symbol TIN0 44 R0 Red Pixels Display Data (LSB) TIN1 45 R1 Red Pixels Display Data TIN2 47 R2 Red Pixels Display Data TIN3 48 R3 Red Pixels Display Data TIN4 1 R4 Red Pixels Display Data TIN5 3 R5 Red Pixels Display Data (MSB) TIN6 4 G0 Green Pixels Display Data (LSB) TOUT0- TOUT0+ No.12 No.11 IN0- IN0+ TIN7 6 G1 Green Pixels Display Data TIN8 7 G2 Green Pixels Display Data TIN9 9 G3 Green Pixels Display Data TIN10 10 G4 Green Pixels Display Data TIN11 12 G5 Green Pixels Display Data (MSB) TIN12 13 B0 Blue Pixels Display Data (LSB) TIN13 15 B1 Blue Pixels Display Data TOUT1- TOUT1+ No.10 No.9 IN1- IN1+ TIN14 16 B2 Blue Pixels Display Data TIN15 18 B3 Blue Pixels Display Data TIN16 19 B4 Blue Pixels Display Data TIN17 20 B5 Blue Pixels Display Data (MSB) TIN18 22 NC Non Connection (open) TIN19 23 NC Non Connection (open) TIN20 25 ENAB Compound Synchronization Signal TOUT2- TOUT2+ No.8 No.7 IN2- IN2+ CLK IN 26 NCLK Data Sampling Clock TCLK OUT- TCLK OUT+ No.6 No.5 CLK IN- CLK IN+ G0 R5 R4 R3 R2 R1 R0 G5B0B1 G4 G1 B4B5 G3 G2 B2B3NCNCENAB IN 0 IN 1 IN 2 TIN4 TIN3 TIN2 TIN1 TIN0 TIN13 TIN12 TIN11 TIN10 TIN9 TIN8 TIN7 TIN20 TIN19 TIN18 TIN17 TIN16 TIN15 TIN14 TIN6 TIN5

RECOMMENDED TRANSMITTER (DS90CF383) TO LTM06C310 INTERFACE ASSIGNMENT Case2: 8bit Transmitter DS90CF383 Input Terminal No. Input Signal (Graphics controller output signal) LTM06C310 Interface (CN1) Symbol DS90CF383 Symbol Function Output Signal Symbol Terminal Symbol TIN0 51 R0 Red Pixels Display Data (LSB) TIN1 52 R1 Red Pixels Display Data TIN2 54 R2 Red Pixels Display Data TIN3 55 R3 Red Pixels Display Data TIN4 56 R4 Red Pixels Display Data TIN6 3 R5 Red Pixels Display Data (MSB) TIN7 4 G0 Green Pixels Display Data(LSB) TOUT0- TOUT0+ No.12 No.11 IN0- IN0+ TIN8 6 G1 Green Pixels Display Data TIN9 7 G2 Green Pixels Display Data TIN12 11 G3 Green Pixels Display Data TIN13 12 G4 Green Pixels Display Data TIN14 14 G5 Green Pixels Display Data(MSB) TIN15 15 B0 Blue Pixels Display Data (LSB) TIN18 19 B1 Blue Pixels Display Data TOUT1- TOUT1+ No.10 No.9 IN1- IN1+ TIN19 20 B2 Blue Pixels Display Data TIN20 22 B3 Blue Pixels Display Data TIN21 23 B4 Blue Pixels Display Data TIN22 24 B5 Blue Pixels Display Data (MSB) TIN24 27 NC Non Connection (open) TIN25 28 NC Non Connection (open) TIN26 30 ENAB Compound Synchronization Signal TOUT2- TOUT2+ No.8 No.7 IN2- IN2+ TIN27 50 NC Non Connection (open) TIN5 2 NC Non Connection (open) TIN10 8 NC Non Connection (open) TIN11 10 NC Non Connection (open) TIN16 16 NC Non Connection (open) TIN17 18 NC Non Connection (open) TIN23 25 NC Non Connection (open) TOUT3- TOUT3+ CLK IN 31 NCLK Data Sampling Clock TCLK OUT- TCLK OUT+ No.6 No.5 CLK IN- CLK IN+ G0 R5 R4 R3 R2 R1 R0 G5B0B1 G4 G1 B4B5 G3 G2 B2B3NCNCENAB IN 0 IN 1 IN 2 NCNC IN 3 NCNC NC NCNC TIN22 TIN21 TIN20 TIN19 TIN23 TIN17 TIN16 TIN11 TIN10 TIN5 TIN27 TIN7 TIN6 TIN4 TIN3 TIN2 TIN1 TIN0 TIN18 TIN15 TIN14 TIN13 TIN12 TIN9 TIN8 TIN26 TIN25 TIN24

256k (k=1024) COLORS COMBINATION TABLE Display R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Gray Scale Level Black L L L L L L L L L L L L L L L L L L - Blue L L L L L L L L L L L L H H H H H H - Green L L L L L L H H H H H H L L L L L L - Light Blue L L L L L L H H H H H H H H H H H H - Red H H H H H H L L L L L L L L L L L L - Purple H H H H H H L L L L L L H H H H H H - Yellow H H H H H H H H H H H H L L L L L L - Basic Color White H H H H H H H H H H H H H H H H H H - Black L L L L L L L L L L L L L L L L L L L 0 L L L L L H L L L L L L L L L L L L L 1 L L L L H L L L L L L L L L L L L L L 2 L3… L60 H H H H L H L L L L L L L L L L L L L 6 1 Dark Light H H H H H L L L L L L L L L L L L L L 6 2 Gray Scale of Red Red H H H H H H L L L L L L L L L L L L Red L63 Black L L L L L L L L L L L L L L L L L L L 0 L L L L L L L L L L L H L L L L L L L 1 L L L L L L L L L L H L L L L L L L L 2 L3… L60 L L L L L L H H H H L H L L L L L L L 6 1 Dark Light L L L L L L H H H H H L L L L L L L L 6 2 Gray Scale of Green Green L L L L L L H H H H H H L L L L L L Green L63 Black L L L L L L L L L L L L L L L L L L L 0 L L L L L L L L L L L L L L L L L H L 1 L L L L L L L L L L L L L L L L H L L 2 L3… L60 L L L L L L L L L L L L H H H H L H L 6 1 Dark Light L L L L L L L L L L L L H H H H H L L 6 2 Gray Scale of Blue Blue L L L L L L L L L L L L H H H H H H Blue L63 Black L L L L L L L L L L L L L L L L L L L 0 L L L L L H L L L L L H L L L L L H L 1 L L L L H L L L L L H L L L L L H L L 2 L3… L60 H H H H L H H H H H L H H H H H L H L 6 1 Dark Light H H H H H L H H H H H L H H H H H L L 6 2 Gray Scale of White & Black White H H H H H H H H H H H H H H H H H H White L63

LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions. In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions detailed in Engineering Information No.EE-N001,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA LCD MODULES". Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical information. 1) SPECIAL PURPOSES A) Toshiba's Standard LCD Modules have not been customized for operation in extreme environments or for use in applications where performance failures could be life-threatening or otherwise catastrophic. B) Since Toshiba's Standard LCD Modules have not been designed for operation in extreme environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock which exceed Toshiba's published specification limits. C) In addition, since Toshiba Standard LCD Modules have not been designed for use in applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft navigation control systems (such a s, but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear energy), or in critical medical device or patient life-support systems. 2) DISASSEMBLING OR MODIFICATION DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. Toshiba doses not warrant the module, if customer disassembled or modified it. 3) BREAKAGE OF LCD PANEL DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if LCD panel is broken and liquid crystal material spills out. If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately. If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 4) GLASS OF LCD PANEL BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken. 5) ELECTRIC SHOCK DISCONNECT POWER SUPPLY before handling LCD module. DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on. 6) ABSOLUTE MAXIMUM RATINGS AND POWER PROTECTION CIRCUIT DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may be damaged. Employ protection circuit for power supply, whenever the specification or TD specifies it. Suitable protection circuit should be applied for each system design. DISPOSAL When dispose LCD module, obey to the applicable environmental regulations.