LTF395-750 LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Electrical Characteristics

  • RoHS-compliant, Lead- free and Halogen-free
  • Reduced PCB space requirements
  • Direct solderable or plug-in versions
  • Low internal resistance
  • Shock safe casing
  • Vibration resistant
  • Available from 0.05A to 6.3A
  • Listed to UL/CSA/NMX 248-1 and UL/CSA/NMX 248-14
  • Conforms to DENAN’s Appendix 3 for the Japanese Market % of Ampere Rating Opening Time 200% 60 Seconds, Max.

(Ohms) Voltage Drop 1.0×IN max. (mV) Power Dissipation 1.0×IN max. (mW) Melting Integral 10×IN max. (A2s) Agency Approvals PS E 0050 50mA 125V 100A @125 VAC 8.1290 1600 85 0.0001 x - 0063 63mA 125V 4.6900 1300 85 0.0001 x - 0080 80mA 125V 3.6500 1200 100 0.0002 x - 0100 100mA 125V 7 .4910 110 0 110 0.0013 x - 0125 125mA 125V 6.1970 1350 160 0.0019 x - 0160 160mA 125V 4.2850 1000 150 0.0037 x - 0200 200mA 125V 2.9780 950 210 0.0075 x - 0250 250mA 125V 2.3100 900 225 0.0130 x - 0315 315mA 125V 1 .7220 800 255 0.0260 x - 0400 400mA 125V 0.2200 230 95 0.0150 x - 0500 500mA 125V 0.1570 220 110 0.0250 x - 0630 630mA 125V 0.1180 210 135 0.0450 x - 0800 800mA 125V 0.0970 200 160 0.0680 x - 110 0 1 .00A 125V 0.0710 190 190 0.1300 x x 1125 1 .25A 125V 0.0635 180 225 0.2000 x x 1160 1 .60A 125V 0.0492 170 275 0.3900 x x 1200 2.00A 125V 0.0412 160 450 0.5300 x x 1250 2.50A 125V 0.0305 150 375 1 .1000 x x 1315 3.15A 125V 0.0247 140 445 1 .9000 x x 1400 4.00A 125V 0.0193 130 520 3.2000 x x 1500 5.00A 125V 0.0139 120 600 6.1000 x x 1630 6.30A 125V 0.0116 115 850 9.7000 x - Notes: 1. 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 2. Resistance is measured at 10% of rated current, 25°C. RoHS The 395 Series TE5® Fuses are fast-acting type, 125V and are designed in accordance to UL 248-14.

Description

Applications

  • Battery chargers
  • Consumer Electronics
  • Power supplies
  • Industrial controllers Agency Approvals Agency Agency File Number Ampere Range E67006 0.05A-6.3A PS E JET1896-31007-1005 1A - 5A Pb PS E Additional Information Datasheet SamplesResources

© 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised:BO.11/13/20 Radial Lead Fuses TE5® > Fast Acting Fuse > 395 Series Average Time Current Curves Current In Amperes Time In Seconds 0.001 0.010 0.100 100 1000 10000 100000 0.100 1 10 1000.02 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: T emperature Re-rating Curve Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation.

© 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised:BO.11/13/20 Radial Lead Fuses TE5® > Fast Acting Fuse > 395 Series Materials Base/Cap: Thermoplastic Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s. (Soldering Iron) Product Characteristics Operating Temperature -40ºC to +125ºC (Consider re-rating) Climatic Category -40ºC to +85ºC/21 days Stock Conditions +10ºC to +60ºC RH ≤ 75% yearly average, without dew, maximum value for 30 days-95% Vibration Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration Dimensions 8,5 0,5 min max. 8L Æ 0,6 5,08 Holes in the printed circuit board 1 +0,1 1,5 max.4 Holes in PCB Long Leads (L=18.8mm) Short Leads (L=4.3mm) Part Numbering System Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code T aping Width

395 Series

Tape and Ammopack N/A 1,400 0000 N/A Short Leads N/A 1,400 0440 N/A 0000395 xxxx Packaging Code Amp Code Series 0000 Tape/Ammopack (1,400 pcs.) 0440 Short Leads - Bulk (1,400 pcs.) Refer to Amp Code column of Electrical Characteristics Table Disclaimer Notice - Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own