LT4ME5.0A DIODES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS STAND-OFF VOLTAGE - 5.0 to 200 Volts POWER DISSIPATION - 400 Watts

FEATURES

  • For surface mounted applications
  • Reliable low cost construction utilizing molded plastic technique.
  • Typical IR less than 1uA above 10V
  • Fast response time: typically less than 1.0ns for Uni-direction,less than 5.0ns for Bi-direction,form Volts to BV min
  • RoHS compliant
  • IEC6100-4-2, >30KV(air); >30KV(Contact).(Note 4)
  • Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
  • Halogen and Antimony Free. “Green” Device (Note 3) MECHANICAL DATA
  • Package material: “Green” molding compound UL flammability classification 94V-0 (No Br. Sb, CI) “Halogen-free”
  • Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device
  • Weight : 0.002 ounces, 0.0165 gram DO-219AA DO-219AA DIM. MIN. TYP. MAX A 3.5 3.80 3.90 B 1.7 1.90 2.00 C 0.81 1.18 1.20 D 2.70 2.80 2.90 E 0.80 1.00 1.35 F 0.05 0.15 0.30 G 0.35 0.60 0.85 H 0.03 0.07 0.10 I 0° 5° 8° All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. ABSOLUTE RATINGS PARAMETER SYMBOL VALUE UNIT Peak Power Dissipation at TA = 25℃ , TP = 1ms (Note 5) PPP 400 W Peak Forward Surge Current 8.3ms single half sine-wave @ TJ = 25℃ (Note 6) IFSM 40 A Steady State Power Dissipation at TL =120℃ PM(AV) 1.0 W Maximum Instantaneous forward voltage at 16A for unidirectional devices only (Note 7) VF 3 V Operating junction temperature range TJ -55 to +175 °C Storage temperature range TSTG -55 to +175 °C REV. 11, Nov-2021, KSIF82 LT4ME5.0A(CA) - LT4ME200A(CA) Green Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen - and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000 ppm antimony compounds. 4. LT4ME5.0 thru LT4ME24 devices that comply IEC 61000 -4-2 levels. 5. Non-repetitive current pulse, per fig. 3 and derated above TA= 25 ℃ per fig.1. 6. Only for unidirectional units. 7. VF max=3V at IF=16 A 300us square wave pulse.

0.1 100 PP, Peak Power (kw) TP, Pulse Width (us) FIG3- Pulse Rating Curve TA = 25°C Non-repetitive pulse waveform shown in fig. 3 RATING AND CHARACTERISTIC CURVES LT4ME5.0A(CA) - LT4ME200A(CA) O 100 125 0 25 50 75 100 125 150 175 200 Peak Pulse Derating in % of Peak Power or Current Ambient Temperature °C FIG.1- Pulse Derating Curve 10 x 1000 waveform as defined by R.E.A 0.2 0.4 0.6 0.8 1.2 0 25 50 75 100 125 150 175 200 PM(AV),STEADY STATE POWER DISSIPATION (W) TL, Lead Temperature °C FIG.2- Steady State Power Derating Curve 60HZ resistive or inductive load 100 1000 10000 1 10 100 1000 Junction Capacitance,Cj (pF) Stand-Off Voltage (V) FIG4- Typical Junction Capacitance Bi-directional Uni-directional TJ = 25°C Measured at F = 1MHZ 1.0 VRMS signal bias = 0 Vdc 100 110 120 0 0.5 1 1.5 2 2.5 3 3.5 4 Peak Pulse Current, (%) Time,T(ms) FIG.5- Pulse waveform Pulse width (TP) is defined as that point where the peak current decays to 50% of IRSM 10 * 1000 waveform as defined by R.E.A. TR = 10 us Peak value (IRSM) Half value = IRSM / 2 TJ = 25°C TP

(clamping voltage) Maximum reverse surge current Maximum reverse leakage at VRWM Uni Bi Uni Bi VRWM(Volts) Min. Max @IT(mA) VRSM(Volts) IRSM(Amps) IR (uA) LT4ME10A LT4ME10CA HX TX 10 11.1 12.3 1 17.0 23.5 5 LT4ME64A LT4ME64CA RM WM 64 71.1 78.6 1 103 3.9 0.5 LT4ME70A LT4ME70CA RP WP 70 77.8 86.0 1 113 3.5 0.5 LT4ME75A LT4ME75CA RR WR 75 83.3 92.1 1 121 3.3 0.5 LT4ME78A LT4ME78CA RT WT 78 86.7 95.8 1 126 3.2 0.5 LT4ME85A LT4ME85CA RV WV 85 94.4 104 1 137 2.9 0.5 LT4ME90A LT4ME90CA RX WX 90 100 111 1 146 2.7 0.5 LT4ME100A LT4ME100CA RZ WZ 100 111 123 1 162 2.5 0.5 LT4ME110A LT4ME110CA SE XE 110 122 135 1 177 2.3 0.5 LT4ME120A LT4ME120CA SG XG 120 133 147 1 193 2.0 0.5 LT4ME130A LT4ME130CA SK XK 130 144 159 1 209 1.9 0.5 LT4ME150A LT4ME150CA SM XM 150 167 185 1 243 1.6 0.5 LT4ME160A LT4ME160CA SP XP 160 178 197 1 259 1.5 0.5 LT4ME170A LT4ME170CA SR XR 170 189 209 1 275 1.4 0.5 LT4ME188A LT4ME188CA SS VS 188 209 231 1 328 1.2 0.5 LT4ME200A LT4ME200CA ST YT 200 224 248 1 324 1.2 0.5 NOTE : Suffix 'A ' denotes 5% tolerance device. 8. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices. 9. The IR limit is double for Bi-directional devices.

C Y Ordering Information : Part Number Package Packing Qty. Carrier LT4MEx.xA(CA) LT4MExxA(CA) LT4MExxxA(CA) DO-219AA 10000pcs Reel DO-219AA 2500pcs Reel Marking Information : Packaging Information : Suggested Pad Layout : DEVICE REEL DIA. Q'TY/REEL REEL/BOX Q'TY/BOX BOX/CARTON Q'TY/CARTON BOX SIZE CARTON SIZE (INCH) (PCS) (REEL) (PCS) (BOX) (PCS) (mm) (mm) LT4MEx.xA(CA) LT4MExxA(CA) LT4MExxxA(CA) 13 10000 2 10000 8 160000 334*334*39 350*350*340 7 2500 4 10000 10 100000 184*184*72 350*350*340 Dimensions Value (in mm) C 2.86 G 1.52 X 1.34 X1 4.20 Y 1.80 XXXX：Assembly Tracking code ZZ：Product Type Marking code Bar Denotes Cathode Side Uni-Directional XXXX ZZ Bi-Directional XXXX ZZ

  1. DIODES INCORPORATED AND ITS SUBSIDIARIES (“DIODES”) MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes products. Diodes products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of the Diodes products for their intended applications, (c) ensuring their applica tions, which incorporate Diodes products, comply the applicable legal and regulatory requirements as well as safety and functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality control techniques, redundancy, malfunction prevention, and ap propriate treatment for aging degradation) to minimize the risks associated with their applications. 3. Diodes assumes no liability for any application -related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein w ill assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and liabilities. 4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes p roducts are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. 6. Diodes products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sal e is prohibited under any applicable laws and regulations. Should customers or users use Diodes products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may c ontain technical inaccuracies, omissions and typographical errors. Diod es does not warrant that information contained in this document is error -free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion hereof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use. Copyright © 2021 Diodes Incorporated www.diodes.com